This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
arm target error-sam
- From: "arun%anwsi dot com at mail3 dot srivari dot net" <arun%anwsi dot com at mail3 dot srivari dot net>
- To: ecos-discuss at sources dot redhat dot com
- Date: Mon, 5 Aug 2002 02:28:33 -0400
- Subject: [ECOS] arm target error-sam
- Reply-to: arun%anwsi.com
hello friends
i had configured ecos for arm7t for samsung NBC-4510b(samsung-ks-32)
i connected the serial port(COM 1) to the target board.
already i had configured and make flash image and rom image
i followed the steps
1) arm-elf-gdb -nw gdb_moule.img
then gdb appeared
(gdb) target rdi s=/dev/ttyS0
then there was an error stating that RDI_OPEN FAILED
i tried many times and reset the evb and checked thr jumper settings
all r correct.
can i know the reason for the error?
thanks in advance
arun.c
--------------------------------------------------------------------
mail2web - Check your email from the web at
http://mail2web.com/ .
--
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss