This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Re: Redboot: "load -m xmodem" command
- From: "Mike A" <embeddedeng at hotmail dot com>
- To: gary at chez-thomas dot org
- Cc: ecos-discuss at sources dot redhat dot com
- Date: Sun, 23 Jun 2002 21:40:13 +0000
- Subject: Re: [ECOS] Redboot: "load -m xmodem" command
- Bcc:
Hi Gary,
Thanks for the info.
My time measurements on Window Hyperterminal:
It printed "CCCCCCCCC", 11 characters in 30 seconds. So, it has 3 seconds
inter-character gap approximatly. Which I think is pretty ok from what you
said in the eariler email.
Are you developing on Windows?? If so, what terminal program are you running
this on? Let me know what you think about this.
Thanks a lot,
-Mike.
Hyperterminal screen capture:
RedBoot> load -m xm
CCCCCCCCCCan't load '': Timed out
RedBoot>
From: Gary Thomas <gary@chez-thomas.org>
To: Mike A <embeddedeng@hotmail.com>
CC: eCos Discussion <ecos-discuss@sources.redhat.com>
Subject: Re: [ECOS] Redboot: "load -m xmodem" command
Date: 22 Jun 2002 06:24:33 -0600
On Sat, 2002-06-22 at 01:07, Mike A wrote:
> Hi,
>
> I Redbooted my ATLAS(MIPS 4Kc) board. Then at the console prompt
"Redboot>"
> (on Windows Hypertermial) I typed in the command to load the RAM image
"load
> -m xmodem". Then I select Transfer->Send file (on Hyperterminal). with
the
> following options I then click OK,
>
> Protocol: Xmodem
> file:
>
C:\myrep\examples\t\t_install\tests\io\wallclock\current\tests\wallclock.srec
>
> The file does not get download...
>
> Even before I start sending from the PC, I see a lot of 'C' being sent
from
> Redboot in response to "load -m xmodem"
>
> I even tried with ymodem.. I wasn't sucessful
>
> Any clue??
The most probable cause is that HAL_DELAY_US() isn't working properly.
The way to check is run the same command (load -m xm) and don't try to
start the transfer. You should see a string of "C" characters, but they
should only come out at a rate of one every 3 or 4 seconds. Any faster
says that the HAL_DELAY_US() macro is broken.
If this is the case, try and fix it and rebuild RedBoot.
As always, if you make changes, it would be nice to pass them back to
the project.
_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp.
--
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss