This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Re: at91hal_platform_setup.h question
- From: Gary Thomas <gary at chez-thomas dot org>
- To: Tim Drury <tdrury at siliconmotorsports dot com>
- Cc: eCos Discussion <ecos-discuss at sources dot redhat dot com>
- Date: 20 Jun 2002 06:36:47 -0600
- Subject: Re: [ECOS] at91hal_platform_setup.h question
- References: <200206200039.08930.tdrury@siliconmotorsports.com>
On Wed, 2002-06-19 at 22:39, Tim Drury wrote:
>
> The following lines appear in hal_platform_setup.h:
>
> #if defined(CYG_HAL_STARTUP_ROMRAM)
> ldr r0,=0x01010000 // Relocate FLASH/ROM to on-chip RAM
> ldr r1,=0x02000000 // RAM base & length
> ldr r2,=0x02010000
> ...
>
> Is there any particular reason the RAM and ROM addresses and lengths
> are hard-coded here? Why not put the constants defined in
> mlt_arm_at91_eb40_ramrom.h in there?
A good idea - please send a patch :-)
--
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss