This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Re: porting to Intel 80200
- From: Drew Kranak <dkranak at sedona dot ch dot intel dot com>
- To: Jing Luo <Jing at vicom dot com>
- Cc: "'ecos-discuss at sources dot redhat dot com'" <ecos-discuss at sources dot redhat dot com>
- Date: Mon, 11 Feb 2002 21:19:15 -0700
- Subject: Re: [ECOS] porting to Intel 80200
- References: <B26EACBBAF91D411BD8500508BF7D695051D33@earth.vicom.com>
Jing:
I used the default eCos/RedBoot map.
Drew
Jing Luo wrote:
> Hi Drew,
>
> Thanks for your reply.
>
> Do you use ARM Domain System for memory mapping or using the default eCos
> flat memory mapping?
>
>
> -----Original Message-----
> From: Drew Kranak [mailto:dkranak@sedona.ch.intel.com]
> Sent: Monday, February 11, 2002 3:35 PM
> To: Jing Luo
> Cc: 'ecos-discuss@sources.redhat.com'
> Subject: Re: [ECOS] porting to Intel 80200
>
> Jing:
> I built eCos for the IQ80310 development platform and ran all the
> tests. A customer also used the same version in a comprehensible
> application to evaluate performance and design considerations. I have not
> ported to a different platform, but I would not expect that the process
> should be difficult.
>
> Drew
>
> Jing Luo wrote:
>
> > Hi,
> >
> > Is there anyone have experience to port eCos to Intel XScale 80200
> > evaluation board?
> >
> > Best Regards,
> >
> > Jing Luo
> > Firmware Engineer
> > VICOM Systems Inc,
> > 47281 Bayside Parkway
> > Fremont, CA 94538
> >
> > Tel: 510-743-1166
> > E-mail: Jing.luo@vicom.com
> >
> > Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
> > and search the list archive: http://sources.redhat.com/ml/ecos-discuss
>
> Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
> and search the list archive: http://sources.redhat.com/ml/ecos-discuss
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss