Re: [ECOS] How do i download the VxWorks image

[Jesper Skov <jskov at redhat dot com>]

On Fri, 2002-01-25 at 07:59, Deepak Shetty wrote:
> can someone help me out on this ??

I imagine VxWorks can answer your question. This list is for eCos
problems.

Jesper


> 
> deepak
> ----- Original Message -----
> From: Deepak Shetty <deepaks@sasken.com>
> To: <ecos-discuss@sources.redhat.com>
> Sent: Wednesday, January 23, 2002 6:39 PM
> Subject: [ECOS] How do i download the VxWorks image
> 
> 
> > Hi, folks
> > I am currently working on an Intel IQ80310 IOP board and need to downlaod
> > the VxWorks image bootrom.bin provided on to the on-board flash
> > unfortunately the board manual doesnt describe the memory location /
> > address where i need to put in the image for proper execution of the same.
> >
> > the board has redboot as the boot monitor, and i need to use the FRU (
> > flash recovery utility ) provided by the intel people to download the
> > image ( redboot as well as any other, for eg: vxwrks ) onto the on board
> > flash via the PCI interface of the PC to which the board is connected.
> >
> > but i guess i need to downlaod the image to a specified address of the
> > flash as there is a rotary switch setting provided on the board if the
> > image downlaoded is of vxworks, but the manual doesnt give the address of
> > the same
> >
> > any idea where i need to download the image of vxworks ? in case any one
> > has dealt with such similar prob before ? I am unable to get any support
> > from wrs / intel on the same :(
> >
> > also usualy how is the memory mapped for the flash ...? redboot shows some
> > info when i enter fis list & fis free, but i am confused ... can someone
> > tell me how is the memory mapping present betn the flash and the onboard
> > 32MB RAM ?
> >
> > Thanx,
> > deepak
> >
> > [ "To steal ideas from one person is plagiarism,
> > to steal ideas from many is research." ] -Anon.
>