RE: [ECOS] Building with eCos 1.3.1

["Gokhan Tanyeri" <gokhan at clarinox dot com>]

A simple workaround for this one is to replace //C with /C in your
"makefile"s (around 10-15 of them!!). works fine ;) The trouble is everytime
you try to build something you need to go through this global search and
replace.
cheers,
gokhan tanyeri

->-----Original Message-----
->From: ecos-discuss-owner@sources.redhat.com
->[mailto:ecos-discuss-owner@sources.redhat.com]On Behalf Of Stephen Wong
->Sent: Tuesday, 27 November 2001 9:55
->To: ecos-discuss@sources.redhat.com
->Subject: [ECOS] Building with eCos 1.3.1
->
->
->Hi,
->
->I am having some trouble building a library with eCos 1.3.1.  I am
->currently in NT4.0, with cygwin DLL 1.3.5 (latest version of cygwin), and
->eCos version 1.3.1.1.  Whenever I try to build a library, I get the
->following error message
->
->make[1]: fopen:
->//C/PROGRA~1/REDHAT~1/eCos/packages/pkgconf/rules.mak: No such
->file or directory
->make[1]: Entering directory
->`C:\MYDATA\Taishan\Work\test_build\hal\common\v1_3_1'
->make[1]: Leaving directory
->`C:\MYDATA\Taishan\Work\test_build\hal\common\v1_3_1'
->make[1]: *** No rule to make target
->`//C/PROGRA~1/REDHAT~1/eCos/packages/pkgconf/rules.mak'.  Stop.
->make: *** [headers] unknown signal
->
->I have mounted my C drive as suggested in the eCos installation
->instructions.  I know there is a previous msg asking the same
->question as I am, and
->it's suggested
->that a newer version of eCos should be used.  I have tried other
->newer versions of eCos, and re-mounted the C drive in cygwin accord to the
->description in the readme
->file and still with no luck.  I have also read that it is
->possible to use an older version of cygwin to work around this
->problem, but I am having
->trouble finding out which version
->of cygwin this is, when to get it.  If you can shine some light
->on this, I'll greatly appreciate it.
->
->Thanks,
->Stephen
->
->