This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
a very agonying problem
- To: <ecos-discuss at sources dot redhat dot com>
- Subject: [ECOS] a very agonying problem
- From: "Shaojie Wu" <swu at zmicro dot com>
- Date: Tue, 6 Nov 2001 18:13:58 -0800
Hi there,
I am using the GNU debugger, the EPI jeeni to develop code for a
custom board with AT91FR4081 processor. Sometimes when I am trying
to download the code into RAM, I will meet a very agonying problem,
but sometimes I did not meet this problem and the program can be
downloaded and run smoothly. when I met that problem, I always got
the following message from the GDB console:
---------------------------
--------------------------
trabfer rate: 273920 bits/second, 489 bytes/write
RDI_execute: branch through location 0
Program received signal SIGTRAP, Trace/Breakpoint trap
0x0 in ?? ( )
P.S. I never set any break point in the program and sometimes even I did not
see the above message on the console after downloading the code into board,
the program does not run, I need to re-connect and download again and again.
Any recommendation will be high appreciated! Help please!!