This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
RE: USB and Ethernet drivers for MPC823
- To: "'Lars dot Lindqvist at combitechsystems dot com'" <Lars dot Lindqvist at combitechsystems dot com>, ecos-discuss at sources dot redhat dot com
- Subject: RE: [ECOS] USB and Ethernet drivers for MPC823
- From: Doug Fraser <dfraser at photuris dot com>
- Date: Mon, 15 Oct 2001 12:51:02 -0400
Lars,
The ethernet on the MPC823 is very close to the ethernet
on the MPC860. There may be some small GPIO initialization
that will be different, but other than that, very close.
I believe there is already ECOS support for the Motorola
MBX860 development board, if so, start there....
USB. There you are probably on your own.
Doug
> -----Original Message-----
> From: Lars.Lindqvist@combitechsystems.com
> [mailto:Lars.Lindqvist@combitechsystems.com]
> Sent: Monday, October 15, 2001 11:53 AM
> To: ecos-discuss@sources.redhat.com
> Cc: Lars.Lindqvist@combitechsystems.com
> Subject: [ECOS] USB and Ethernet drivers for MPC823
>
>
> Hi,
>
> I need a USB slave driver for the MPC823. Are there any?
>
> If not, do I need to write the hardware specific package from
> scratch or are there smarter ways to do this?
>
> If I understand it correctly it should be possible to use the Ethernet
> driver developed for MC68360 for MPC823 with some smaller
> adjustments?
>
> /Lars L
>