Re: [ECOS] eth0 entry in NETDEVTBL

["Sunil Mohan Savanur" <sunil dot savanur at wipro dot com>]

One more question :

which CDL is this ?

Thanks in advance.
Regards
-Sunil
----- Original Message -----
From: Trenton D. Adams <tadams@extremeeng.com>
To: 'Sunil Mohan Savanur' <sunil.savanur@wipro.com>; 'eCos discussion'
<ecos-discuss@sources.redhat.com>
Sent: Friday, October 12, 2001 8:09 PM
Subject: RE: [ECOS] eth0 entry in NETDEVTBL


> I just posted a question about that yesterday.
>
> See the "SIOCSIFADDR: Device not configured" topic.
>
> Essentially I was told to put "-library=libextras.a myfile.c" in the
> "compile" line of the CDL.  This fixed the problem.
>
> > -----Original Message-----
> > From: ecos-discuss-owner@sources.redhat.com
> > [mailto:ecos-discuss-owner@sources.redhat.com] On Behalf Of
> > Sunil Mohan Savanur
> > Sent: Friday, October 12, 2001 8:10 AM
> > To: eCos discussion
> > Subject: [ECOS] eth0 entry in NETDEVTBL
> >
> >
> > Hello,
> >
> > I am not developing any special network driver for my
> > synthetic target linux.
> > I am planning to use existing driver that is
> > "packages/io/eth/current/src/net/eth_drv.c"
> > I have added CYGPKG_NET and CYGPKG_NET_ETH_DRIVERS. Then built
> > eCos.
> >
> > Still in my application I am getting socket/bind error ?
> >
> > What is needed to make "eth0" interface active ?
> >
> > Is it required to populate the "eth0" entry in NETDEVTBL as a part of
> > initialization ?
> >
> > Looks like eth_drv_net("eth0") call does not find any valid
> > entry in NETDEVTBL
> > !!
> >
> > Please guide me.
> >
> > Thanks & regards
> > Sunil Savanur
> >
> >
> >
>

-----------------------------------------------------------------------------------------------------------------------------
Information transmitted by this E-MAIL is proprietary to Wipro and/or its Customers
and is intended for use only by the individual or entity to which it is
addressed, and may contain information that is privileged, confidential or
exempt from disclosure under applicable law. If you are not the intended
recipient or it appears that this mail has been forwarded to you without
proper authority, you are notified that any use or dissemination of this
information in any manner is strictly prohibited. In such cases, please
notify us immediately at mailto:mailadmin@wipro.com and delete this mail
from your records.
------------------------------------------------------------------------------------------------------------------------------