RE: [ECOS] Port to XScale board

[Cristiano Ligieri Pereira <cpereira at ics dot uci dot edu>]

> The binary download won't print any messages.  S-record does some
> verification and thus does print things.
> 
> First of all, try leaving the "-v" option off.  It will only get in
> the way (most recent sources disable it for X-modem).
> 
> Then, try loading to some different address - try a much higer one like
> 0x100000.

RedBoot> load -v -m xmodem                                                     
..Entry point: 0x00060040, address range: 0x00060000-0x00070328                
xyzModem - CRC mode, 1386(SOH)/0(STX)/0(CAN) packets, 4 retries       

RedBoot> dump -b 0x60000 -l 0x100                                              
0x00060000: 18F0 9FE5 18F0 9FE5  18F0 9FE5 18F0 9FE5   |................|      
0x00060010: 18F0 9FE5 0000 0000  18F0 9FE5 18F0 9FE5   |................|      
0x00060020: 4000 0600 8801 0600  F001 0600 2802 0600   |@...........(...|      
0x00060030: 8802 0600 0000 0000  7403 0600 3C03 0600   |........t...<...|      
0x00060040: 2106 A0E3 4010 A0E3  0010 80E5 0070 0FE1   |!...@........p..|      
0x00060050: 1F70 07E2 1300 57E3  0700 000A 0000 A0E3   |.p....W.........|      
0x00060060: 1015 9FE5 0420 91E5  0420 80E5 2420 91E5   |..... ... ..$ ..|      

...

I found out what was wrong (I put some stupid printf's where i shouldn't
yesterday late night... ). It working fine now. So after downloading the
file I should just type 'go' to the entry point address and it should
work, right?

That's not happening... :-| (as usual nothing works at the first time...)

Cristiano.