This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
RE: Port to XScale board
- To: Cristiano Ligieri Pereira <cpereira at ics dot uci dot edu>
- Subject: RE: [ECOS] Port to XScale board
- From: Gary Thomas <gthomas at redhat dot com>
- Date: Mon, 20 Aug 2001 18:09:04 -0600 (MDT)
- Cc: ecos-discuss at sourceware dot cygnus dot com
- Organization: Red Hat, Inc.
On 20-Aug-2001 Cristiano Ligieri Pereira wrote:
>
> Which kind of file should I donwload via RedBoot?
> Binary or SREC?
>
Like I mentioned, either mode can be used, but if you don't specify
the '-r' flag to the 'load' command, you *must* use S-records. Only
use the '-r' flag if the data is raw binary, i.e. not formatted in
any way.
> ------------------------------------------------------------
> Cristiano Ligieri Pereira - http://www.ics.uci.edu/~cpereira
>
> On Mon, 20 Aug 2001, Cristiano Ligieri Pereira wrote:
>
>>
>> This 'dots' mean that something was being downloaded?
>>
>> RedBoot> load -r -v -m xmodem -b 0x00060000
>> CC...........Can't load '': Timed out
>> RedBoot>
>>
>> Looks like it keeps timing out :-(
>>
>> Cristiano.
>>
>> ------------------------------------------------------------
>> Cristiano Ligieri Pereira - http://www.ics.uci.edu/~cpereira
>>
>> On Mon, 20 Aug 2001, Gary Thomas wrote:
>>
>> >
>> > On 20-Aug-2001 Cristiano Ligieri Pereira wrote:
>> > >
>> > > It's Linux. I'll try minicom.
>> > >
>> >
>> > Cool. With 'minicom', just use ^A-S (send) directly from minicom, without
>> > breaking out. I also turn off the little file selection menu and just
>> > enter the file name directly as RedBoot will most likely timeout before
>> > you can go toodling around the menus and find the file you want to download.
>>
>>