This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Re: Hello Example
- To: Ron Avisa <ravisa at base2software dot com>
- Subject: Re: [ECOS] Hello Example
- From: Jonathan Larmour <jlarmour at redhat dot com>
- Date: Thu, 02 Aug 2001 04:16:48 +0100
- CC: ecos-discuss at sources dot redhat dot com
- References: <4.2.0.58.20010801160153.00a33300@128.121.113.105>
Ron Avisa wrote:
>
> I have setup the ecos config for a "default" cirrus ARM 7xxx board with RAM
> startup
> and 7212 cpu settings. I have flashed my board with the cymon_ROM bootloader.
> I have built the ecos kernel and tests and have been able to download and
> run them
> successfully.
Good, so there's nothing intrinsically wrong.
> The next step then was to put together a simple app and try downloading that.
> I modified ...\eCos\examples\makefile to have a working dir pointing to my
> ecos-work_install
> directory and I set XCC up for ARM 7212
> and did a "make". This seems to work fine producing a 1.2M image.
> However when I attempt to download this via GDB/insight I get
>
> "error: invalid download offset message"
If you open the console first, there should be some output. What is it?
Jifl
--
Red Hat, Rustat House, Clifton Road, Cambridge, UK. Tel: +44 (1223) 271062
Maybe this world is another planet's Hell -Aldous Huxley || Opinions==mine