This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
RE: Enable EDB7xxx interrupts
- To: "Trenton D. Adams" <tadams at extremeeng dot com>, "'eCos discussion'" <ecos-discuss at sources dot redhat dot com>
- Subject: RE: [ECOS] Enable EDB7xxx interrupts
- From: "Lewin A.R.W. Edwards" <larwe at larwe dot com>
- Date: Mon, 25 Jun 2001 12:44:56 -0400
- References: <4.3.2.7.2.20010625123932.07af5b70@mail.larwe.com>
>Oops, I forgot to mention that I've set bit 5 in the INTMR1.
Do you get an IRQ or FIQ when you force the 6700 to issue an interrupt? If
you do, but it just doesn't have the right INTSR bits, then maybe someone
else is servicing that interrupt and clearing the bit before you're looking
at it.
-- Lewin A.R.W. Edwards
Embedded Engineer, Digi-Frame Inc.
Work: http://www.digi-frame.com/
Tel (914) 937-4090 9am-6:30pm M-F ET
Personal: http://www.larwe.com/ http://www.zws.com/
"Far better it is to dare mighty things, to win glorious triumphs, even
though checkered by failure, than to rank with those poor spirits who
neither enjoy much nor suffer much, because they live in the gray twilight
that knows not victory nor defeat."
(Theodore Roosevelt)