This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Re: Basic Redboot Configuration
- To: Gary Thomas <gthomas at cambridge dot redhat dot com>
- Subject: Re: [ECOS] Basic Redboot Configuration
- From: Jonathan Larmour <jlarmour at redhat dot com>
- Date: Thu, 10 May 2001 22:24:06 +0100
- Cc: "Narayana, Venkat A." <NarayVA at nsc-msg01 dot network dot com>,"ecos-discuss at sources dot redhat dot com" <ecos-discuss at sources dot redhat dot com>
- Organization: Red Hat UK Ltd.
- References: <XFMail.20010510144850.gthomas@cambridge.redhat.com>
Gary Thomas wrote:
>
> On 10-May-2001 Narayana, Venkat A. wrote:
> > Hi,
> > How to make Redboot with just Ethernet support. This is for XScale board.
> > I took a very basic Redboot Configuration(just Serial Port support) and
> > added
> > CYGPKG_IO_ETH_DRIVERS, CYGPKG_NET packages. But when i did
> > 'ecosconfig check', it tell me that i should add CYGPKG_KERNEL pkg.
> > Is there any way just to add Ethernet support into redboot without adding
> > KERNEL package?
> >
> > Thanks in Advance,
> > Venkat
>
> You should _not_ add CYGPKG_NET as this adds the eCos full TCP/IP networking.
>
> % ecosconfig new iq80310 redboot
[snip rest]
Or better still, follow the instructions in the Redboot User's manual!
http://sources.redhat.com/ecos/docs-latest/redboot/installation-and-testing.html#IQ80310
Jifl
--
Red Hat, Rustat House, Clifton Road, Cambridge, UK. Tel: +44 (1223) 271062
Maybe this world is another planet's Hell -Aldous Huxley || Opinions==mine