[ECOS] connection arm-elf-gdb and EDB7211

[Edelmann Thomas <Thomas dot Edelmann at nbgm dot siemens dot de>]

Hi,

I have a problem connecting to the CirrusLogic Evaluationboard EDB7211.

I can download the cygmon.bin via serial line without any problem. But I'm
unbable to get a connection for arm-elf-gdb to the stub.

I'm starting arm-elf-gdb and enter then 'set remotebaud 38400' and 'target
remote /dev/ttyS0'. These commands should open the connection to the board.
When I try afterwards to download my little hello program (specified on the
commandline 'arm-linux-gdb hello') I receive only "Ignoring packet error,
continueing...". 

Has anybody the same problem or eventually a solution for the problem.

I don't understand why I can download the stub without a problem but then,
when I try to download a program via gdb, I receive only errors???

Thanks for your help,
Thomas

> ---
> Windows:  A 32 bit shell for a 16 bit operating system, originally written
> for
>  an 8 bit processor on a 4 bit bus by a 2 bit company that can't stand 1
> bit of
>  competition!
> ________________________________________________________
> Thomas Edelmann             Siemens AG, A&D GT 13
> * Voice:  +49 911/895-2703	Postfach 4848
> * Fax:      +49 911/895-3715	D-90327 Nürnberg
> * E-Mail: mailto:Thomas.Edelmann@nbgm.siemens.de
>       Visit our Internet-Server at http://www.ad.siemens.de
> 
> 
>