This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Problem with testing i386
- To: "'ecos-discuss at sourceware dot cygnus dot com'" <ecos-discuss at sourceware dot cygnus dot com>
- Subject: [ECOS] Problem with testing i386
- From: JITENDRA kanitkar <Jitendrak at netbrahma dot com>
- Date: Thu, 8 Feb 2001 19:22:43 +0530
Hi there,
I am trying to run ecos on i386 target. my target set up is PIII with FDD
and serial port.
When I run insight on host and after following the procedure , it gives msg
"connection established" but when I try to run thread_gdb.exe it gives error
"can't load".
As per the document when I say "i386-elf-gdb -nw thread_gdb.exe" on my
(linux ) host it gives following error.
[root@jitu tests]# i386-elf-gdb -nw thread_gdb.exe
GNU gdb 5.0
Copyright 2000 Free Software Foundation, Inc.
GDB is free software, covered by the GNU General Public License, and you are
welcome to change it and/or distribute copies of it under certain
conditions.
Type "show copying" to see the conditions.
There is absolutely no warranty for GDB. Type "show warranty" for details.
This GDB was configured as "--host=i686-pc-linux-gnu --target=i386-elf"...
(gdb) set remotebaud 38400
(gdb) target remote /dev/ttyS0
Remote debugging using /dev/ttyS0
Ignoring packet error, continuing...
Ignoring packet error, continuing...
Ignoring packet error, continuing...
Couldn't establish connection to remote target
Malformed response to offset query, timeout
(gdb)
Any pointers?
Thanks in advance.
Jitendra