This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Running hello.c on i386
- To: "'ecos-discuss at sourceware dot cygnus dot com'" <ecos-discuss at sourceware dot cygnus dot com>
- Subject: [ECOS] Running hello.c on i386
- From: JITENDRA kanitkar <Jitendrak at netbrahma dot com>
- Date: Mon, 5 Feb 2001 18:46:51 +0530
Hi there,
I am trying to load ecos on PIII m/c currently running RH6.2
I followed the documentation(I belive) following are the snapshots of some
of the commands o/p. When i tryied to compile hello.c as per the document
with prefixing i386-elf- to gcc it gives errors(regarding paths). The other
issue is I copied gdb stub on floppy and tryied to boot it from that, it
doesn't work. It gives some garbage(according to me) on the left top of the
screen and hangs.
Pl. suggest some pointers.
Thanks in advance,
jitendra.
[root@jitu ecos-work]# ecosconfig new pc
1 conflict(s) resolved:
CYGSEM_HAL_I386_PC_STARTUP_RAM:
Requires constraint not satisfied:
!CYGIMP_HAL_COMMON_INTERRUPTS_USE_INTERRUPT_STACK
[root@jitu ecos-work]# ls
ecos.ecc
[root@jitu ecos-work]# vi ecos.ecc
c[root@jitu ecos-work]# ecosconfig tree
5 conflict(s) resolved:
CYGSEM_HAL_I386_PC_STARTUP_RAM:
Requires constraint not satisfied: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT:
Requires constraint not satisfied: !CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
CYGSEM_HAL_I386_PC_STARTUP_RAM:
Requires constraint not satisfied: CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT:
Requires constraint not satisfied: !CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
CYGSEM_HAL_I386_PC_STARTUP_RAM:
Requires constraint not satisfied: CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
[root@jitu ecos-work]#