Re: [ECOS] USB Device support

["Charles-Henri" <charles-henri at prolectronic dot com>]

I confirm, you can find an USB sample with the Cirrus 7212 board, I have use
it
for an developpement and it's work fine, you have only to adapt to your
hardware.
I developp now an another USB driver for the OKI ML671000 microcontroller,
if
you want the source I send you when finish, max 2 weeks.

balet charles-henri

----- Message d'origine -----
De : "Lewin A.R.W. Edwards" <larwe@larwe.com>
À : "Nick - eCos Developer" <n_ecos@steve.targus.net>; "Ecos - Discuss"
<ecos-discuss@sourceware.cygnus.com>
Envoyé : mercredi, 17. janvier 2001 21:32
Objet : Re: [ECOS] USB Device support


>
> >I saw a few posts a while back from people working on drivers for the
> >Phillips USB interface device, PDIUSBD12. Note that this is not a USB
host
> >controller. Has anyone got a working driver of any sort for this chip?
>
> What type of drivers are you talking about? For USB, the drivers on the
> host end are the complex hassle, or that has been my experience anyway.
> Once you can work out how to get the host to squirt data, interfacing to
> the parallel type USB appliance-end ICs is pretty simple.
>
> We have chosen to use a USB to RS232 solution for our USB product, because
> it can be boilerplated into our design, and I am trying to get the USB
port
> totally eliminated off the product if possible. So much hassle to support
> it with all the different Windows and MacOS flavors and idiosyncratic host
> controller ICs out there.
>
> === Lewin A.R.W. Edwards (Embedded Engineer)
> Work: http://www.digi-frame.com/
> Personal: http://www.zws.com/ and http://www.larwe.com/
>
> "Und setzet ihr nicht das Leben ein,
> Nie wird euch das Leben gewonnen sein."
>
>