This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Re: ARM7 debugging
> > - when I use no windows interface gdb connected to target: gdb>
> > target rdi e=192.168.1.100 A user program can be downloaded and
> > executed.
>
>You should be able to type the same commands into the gdb
>window when using the windowing interface. Does that work?
Yes, it work.
But if I don't use gdb.ini file how can I init the chip select for RAM?
It must be before "load".
>method, but I find it far simpler to type "target" and "load"
>commands in the gdb window.
>
>If you get that method to work, and you still want to use the
>menu entries, let me know, and I'll go back and find my notes.
For me it dosn't matter - I will only the simple way to debug a program.
>need to either use a CVS snapshot of gdb/insight or apply the
>patches at
>
> ftp://ftp.visi.com/users/grante/gdb-rdi-patches/5.0
Thank you! It work! :-)
The example twothreads don't work with JEENI - I receive no timer
interrupt. The same elf file work fine with Wiggler.
Do you have any idea?
best regards
Ilko