This is the mail archive of the ecos-discuss@sources.redhat.com mailing list for the eCos project.
Index Nav: | [Date Index] [Subject Index] [Author Index] [Thread Index] | |
---|---|---|
Message Nav: | [Date Prev] [Date Next] | [Thread Prev] [Thread Next] |
Hello, everyone,
I attached my pci1.exe test running result in the end, the UNKNOW device is
my own card, according to the dump, which address that I should use to access
the PCI memory? Any helpful explaination will be appreciated very much. Thanks a
lot in advance!
Best Rgds,
-Ling
==========================================================
(cont) Continuing.
Found device on bus 0, devfn 0x00: Note that board is active. Probed sizes and CPU addresses invalid! Device configuration failed - device already enabled Vendor 0x1033 [NEC][NEC Corporation] Device 0x001A [UNKNOWN] Command 0x0146, Status 0x0280 Class/Rev 0x06800001 [Bridge Device][Other][] Header 0x11FF0E SubVendor 0x1111, Sub ID 0xFF19 BAR[0] 0x1C000000 / probed size 0x00000000 / CPU addr 0x1111FF15 BAR[1] 0x80000000 / probed size 0x00000000 / CPU addr 0x00000000 BAR[2] 0x00000000 / probed size 0x00000000 / CPU addr 0x1111FF16 BAR[3] 0x00000000 / probed size 0x00000000 / CPU addr 0x00000000 BAR[4] 0x00000000 / probed size 0x00000000 / CPU addr 0x1111FF17 BAR[5] 0x00000000 / probed size 0x00000000 / CPU addr 0x00000000 Wired to HAL vector 11 Found device on bus 0, devfn 0x08: Device configuration succeeded Vendor 0x1023 [Trident][Trident Microsystems] Device 0x9660 [9660][] Command 0x0000, Status 0x0280 Class/Rev 0x030000D3 [Display Controller][PC Compatible][VGA] Header 0x11FF0E SubVendor 0x1111, Sub ID 0xFF19 BAR[0] 0x00000000 / probed size 0xFFC00000 / CPU addr 0xC0000000 BAR[1] 0x00400000 / probed size 0xFFFF0000 / CPU addr 0xC0400000 BAR[2] 0x00000000 / probed size 0x00000000 / CPU addr 0xFFFFFFFF BAR[3] 0x00000000 / probed size 0x00000000 / CPU addr 0xFFFFFFFF BAR[4] 0x00000000 / probed size 0x00000000 / CPU addr 0xFFFFFFFF BAR[5] 0x00000000 / probed size 0x00000000 / CPU addr 0xFFFFFFFF Wired to HAL vector 12 Found device on bus 0, devfn 0x10: Device configuration succeeded Vendor 0x1688 [UNKNOWN] <------------ This is my own card Device 0x8888 [UNKNOWN] Command 0x0000, Status 0x0280 Class/Rev 0x07800001 [UNKNOWN] Header 0x11FF0E SubVendor 0x1111, Sub ID 0xFF19 BAR[0] 0x00410008 / probed size 0xFFFFF008 / CPU addr 0xC0410000 BAR[1] 0x00000000 / probed size 0x00000000 / CPU addr 0xFFFFFFFF BAR[2] 0x00000000 / probed size 0x00000000 / CPU addr 0xFFFFFFFF BAR[3] 0x00000000 / probed size 0x00000000 / CPU addr 0xFFFFFFFF BAR[4] 0x00000000 / probed size 0x00000000 / CPU addr 0xFFFFFFFF BAR[5] 0x00000000 / probed size 0x00000000 / CPU addr 0xFFFFFFFF Wired to HAL vector 13 Found device on bus 0, devfn 0x18: Device configuration succeeded Vendor 0x1011 [DEC][Digital Equipment Corporation] Device 0x0009 [DC21140][Fast Ethernet Ctrlr] Command 0x0000, Status 0x0280 Class/Rev 0x02000022 [Network Controller][Ethernet][] Header 0x11FF0E SubVendor 0x1111, Sub ID 0xFF19 BAR[0] 0x00000001 / probed size 0xFFFFFF81 / CPU addr 0xAC000000 BAR[1] 0x00411000 / probed size 0xFFFFFF80 / CPU addr 0xC0411000 BAR[2] 0x00000000 / probed size 0x00000000 / CPU addr 0xFFFFFFFF BAR[3] 0x00000000 / probed size 0x00000000 / CPU addr 0xFFFFFFFF BAR[4] 0x00000000 / probed size 0x00000000 / CPU addr 0xFFFFFFFF BAR[5] 0x00000000 / probed size 0x00000000 / CPU addr 0xFFFFFFFF Wired to HAL vector 14 Strings in [] are from the PCI Code List at http://www.yourvote.com/pci
It seems that some of the device information has not been registered in the PCI Code List. Please consider improving the database by registering the [UNKNOWN] information for your devices. Thanks. Testing PCI memeory mapping:
PASS:<pci1 test OK> EXIT:<done> [New thread 3] |
Index Nav: | [Date Index] [Subject Index] [Author Index] [Thread Index] | |
---|---|---|
Message Nav: | [Date Prev] [Date Next] | [Thread Prev] [Thread Next] |