This is the mail archive of the
ecos-devel@sourceware.org
mailing list for the eCos project.
Re: eCos GNU tools 4.6.2-20120125 ready for testing [Was Re: Gnutools: consideration for upgrade to GCC 4.6]
- From: Alex Schuilenburg <alexs at ecoscentric dot com>
- To: Ilija Kocho <ilijak at siva dot com dot mk>
- Cc: Alex Schuilenburg <alexs at ecoscentric dot com>, eCos developers <ecos-devel at ecos dot sourceware dot org>
- Date: Mon, 20 Feb 2012 15:59:00 +0000
- Subject: Re: eCos GNU tools 4.6.2-20120125 ready for testing [Was Re: Gnutools: consideration for upgrade to GCC 4.6]
- References: <4F106345.4080902@siva.com.mk> <4F11574D.9070002@dallaway.org.uk> <4F11AC54.7000902@siva.com.mk> <4F1CB41C.90900@jifvik.org> <4F1DA9A0.5070702@siva.com.mk> <4F1FF5AD.4010901@ecoscentric.com> <4F39887A.5050905@siva.com.mk>
Hi Ilija,
On 2012-02-13 22:02, Ilija Kocho wrote:
> Hi Alex
>
> eCos GNU tools 4.6.2-20120125 (arm_eabi) binaries are ready for testing.
> John has placed them on FTP and by now most of the mirrors should have
> updated.
>
> I guess this one is closest to you:
> http://www.mirrorservice.org/sites/sourceware.org/pub/ecos/gnutools/i386linux/test/ecos-gnutools-arm-eabi-20120125.i386linux.tar.bz2
>
> And here are the patches:
> http://www.mirrorservice.org/sites/sourceware.org/pub/ecos/gnutools/src/test/ecos-gnutools-20120125-patches.tar.bz2
>
> The specific feature of public eCos is that it uses uSTL rather than
> stdlibc++. Would it be possible for you to add ustl with fileio tests?
> Should I be of any help please contact me.
Yes - should be no problem. Just send me a minimal config/export of the
configuration setting you want and I will add that to the perm list.
-- Alex
>
> Cheers
> Ilija
>
>
>
> On 25.01.2012 13:29, Alex Schuilenburg wrote:
>> Hi Ilija
>>
>> eCosCentric are happy to make its eCos test farm available to you for
>> automated testing of the new toolchains.
>>
>> Having gone through our list of ARM and Cortex hardware in our test farm
>> and the hardware supported in the public eCos repository (i.e. the
>> physical hardware we have and what is supported in the public eCos
>> repository), we propose running tests for the Embedded Artists
>> LPC2468-32 (to test ARM7 and thumb mode, as well as the network stacks
>> with the newer toolchain since this board has ethernet support) and the
>> ST STM3210E-EVAL evaluation board (to test Cortex-M3).
>>
>> The tests will take around 2 weeks to run after which I will post the
>> results for you to examine. The results will be accessible through a
>> web interface in three forms:
>>
>> 1. eCos build results
>> eCos and its tests will be built in a number of different eCos
>> configurations utilising a number of different compiler options.
>> Each configuration is known as a perm (short for permutation). A
>> build is a tuple consisting of target+source+toolchain+perm. The
>> results of each build consist of the shell script used to configure
>> and build eCos and the tests (so you can rebuild yourself), the eCos
>> ecm export (so you can import the configuration without having to
>> run the shell script), as well as the full compilation and link
>> output of the build.
>> 2. eCos test results
>> Each test built against a tuple is executed on real hardware with
>> the test result logged. If a test fails, the full output is
>> preserved and made available along with the test binary, although
>> the full output of special tests such as tm_basic are also always
>> made available.
>> 3. eCos test result summary
>> The number of passes and number of each type of failure for each
>> build is presented in table form to provide an overview of the test
>> results for the build.
>>
>> All we need from you is a Linux hosted arm-eabi toolchain in tarball
>> form and the eCos sources, also in tarball form, although we can use
>> http://hg-pub.ecoscentric.com/ecos as the source base if you prefer.
>>
>> If you would like to make use of the test farm and agree with the
>> selection of targets (or can propose alternatives), please let me know
>> and provide me with the url where the toolchain can be downloaded from
>> (and optionally the sources). I'll post the results as soon as the
>> tests are completed.
>>
>> Cheers
>>
>> -- Alex Schuilenburg
>>
>> Managing Director/CEO eCosCentric Limited
>> www.ecoscentric.com Reg in England and Wales, Reg No 4422071
>>
>>
>>
>