This is the mail archive of the ecos-devel@sourceware.org mailing list for the eCos project.

Index Nav:	[Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav:	[Date Prev] [Date Next]	[Thread Prev] [Thread Next]
Other format:	[Raw text]

Re: How do I add a serial driver?

From: Andrew Lunn <andrew at lunn dot ch>
To: Paul J THACKER <paul dot thacker at st dot com>
Cc: ecos-devel at ecos dot sourceware dot org
Date: Wed, 11 Jun 2008 21:22:32 +0200
Subject: Re: How do I add a serial driver?
References: <484EE45D.6040407@st.com> <20080610214551.GJ8456@lunn.ch> <484EFC97.1050207@st.com> <20080611065454.GK8456@lunn.ch> <484FFD64.10307@st.com> <20080611164820.GA523@lunn.ch> <48500CA7.3080201@st.com>

>> We know you have CYGPKG_IO_SERIAL_DEVICES enabled. Does your
>> configuration have CYGPKG_IO_SERIAL enabled? 
>
> Not sure how to tell. It doesn't say one way or the other in configtool.

That is why i recommended looking in the ecos.ecc file.


>> Look at your ecos.ecc file. You can learn a lot from that.
>
> Don't have an ecos.ecc. Do you mean ecos.db?

Nope. In your work directory. It might be named something else, but
similar, since you are using the configtool. ecosconfig always calls
is ecos.ecc by default.

   Andrew

Follow-Ups:
- Re: How do I add a serial driver?
  - From: Paul J THACKER

References:
- How do I add a serial driver?
  - From: Paul J THACKER
- Re: How do I add a serial driver?
  - From: Andrew Lunn
- Re: How do I add a serial driver?
  - From: Paul J THACKER
- Re: How do I add a serial driver?
  - From: Andrew Lunn
- Re: How do I add a serial driver?
  - From: Paul J THACKER
- Re: How do I add a serial driver?
  - From: Andrew Lunn
- Re: How do I add a serial driver?
  - From: Paul J THACKER

Index Nav:	[Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav:	[Date Prev] [Date Next]	[Thread Prev] [Thread Next]