This is the mail archive of the
ecos-devel@sources.redhat.com
mailing list for the eCos project.
Re: H8S / configtool: where to set the clockfrequency ?
- From: Marc Michalewicz <marc dot michalewicz at pixy dot ch>
- To: ecos-devel at sources dot redhat dot com
- Date: Wed, 25 May 2005 14:06:44 +0200
- Subject: Re: H8S / configtool: where to set the clockfrequency ?
- References: <1117017103.28907.14.camel@c29.pixybugs.dyndns.org>
Hi,
sorry to annoy anyone with this startup-problem; it is working now:
In the H8S2357-package , I only had to adopt the oscillatorfrequency -
which I found finally - and had to set both "debug" and "diagnosis"
channel to 0, 115200 baud (strange, but ok). Now it works, i.e. I can
work on the redboot-cmdline.
Marc
Am Mittwoch, den 25.05.2005, 12:31 +0200 schrieb Marc Michalewicz:
> Hi,
>
> finally, with the help of uwe kindlers h8s-package (thanks a lot !) It
> _seems_ redboot is working on my h8s2329-platform, but there is only
> crap coming out of the RS232-interface after a reset - (i.e. I think I
> am very close to the redboot-cmdline); regardless which baudrate I use.
>
> I assume, that there is some location where to set the Quartz-frequency
> and that it is not set to the 22.1184 Mhz (the 2329-EDK) - so that the
> baudrate isnot correct. So Where do I adjust the frequency ???
>
> Am i right or could this behaviour caused by other reasons ?
>
> Thanks for any help,
>
> Marc
>
>
>