This is the mail archive of the
ecos-devel@sources.redhat.com
mailing list for the eCos project.
Porting ecos to S3C44B0X
- From: "sachin k" <mesachink at rediffmail dot com>
- To: ecos-devel at sources dot redhat dot com
- Date: 24 Feb 2003 13:07:08 -0000
- Subject: Porting ecos to S3C44B0X
- Reply-to: "sachin k" <mesachink at rediffmail dot com>
S3C44B0X Memory Map after reset
+-----------------------+ 0x1000_0000
| SROM/DRAM/SDRAM |
32mb | |
+-----------------------+ 0x0e00_0000
| SROM/DRAM/SDRAM |
32mb | |
+-----------------------+ 0x0c00_0000
| SROM |
32mb | |
+-----------------------+ 0x0a00_0000
| SROM |
32mb | |
+-----------------------+ 0x0800_0000
| SROM |
32mb | |
+-----------------------+ 0x0600_0000
| SROM |
32mb | |
+-----------------------+ 0x0400_0000
| SROM |
32mb | |
+-----------------------+ 0x0200_0000
4mb { } spl fun
regs.
+-----------------------+ 0x01c0_0000
28mb | SROM |
+-----------------------+ 0x0000_0000
I am porting the ecos kernel to S3C44B0X samsung board. the
memory layout of which is
shown above. I wanted to write the memory layout files for this.
What are the steps I
should follow and what are the other things i have to consider
while writing them