This is the mail archive of the
ecos-bugs@sourceware.org
mailing list for the eCos project.
[Bug 1001274] Add another KSZ8041 silicon-release PHY entry.
- From: bugzilla-daemon at bugs dot ecos dot sourceware dot org
- To: unassigned at bugs dot ecos dot sourceware dot org
- Date: Sat, 2 Jul 2011 13:45:23 +0100
- Subject: [Bug 1001274] Add another KSZ8041 silicon-release PHY entry.
- Auto-submitted: auto-generated
- References: <bug-1001274-777@http.bugs.ecos.sourceware.org/>
Please do not reply to this email. Use the web interface provided at:
http://bugs.ecos.sourceware.org/show_bug.cgi?id=1001274
--- Comment #2 from Ilija Kocho <ilijak@siva.com.mk> 2011-07-02 13:45:21 BST ---
(In reply to comment #1)
> Hi Ilija,
>
> Googling around PHY IDs for KSZ8041 I found no PHY_ID2 = 0x1513 ...
> Where this value came from? Can you, please, point on your source?
> I got for this PHY chip PHY_ID1 = 0x22 and PHY_ID2 = 0x1512 only.
>
> Sergei
Hi Sergei, Thanks for prompt response.
I found it out in my Tower dev. kit during a course of making eth driver for
Kinetis. Here is the stat:
-----------------------------
PHY: Micrel KSZ8041 at addr 0
KSZ8041 MIIM Register setings:
r00: 3000 786d
r02: 0022 1513
r04: 01e1 45e1
r06: 0007 2001
r08: 0000 0000
r0a: 0000 0000
r0c: 0000 0000
r0e: 0000 0000
r10: 0000 0000
r12: 0000 0000
r14: 0001 0000
r16: 0600 0000
r18: 0000 0000
r1a: 0000 0029
r1c: 0008 0000
r1e: 0000 9198
----------------------------
I too didn't find this revision explicitly referenced in Micrel docs. There is
(probably older) document that refers to r03 == 2 and this one
http://www.micrel.com/_PDF/Ethernet/datasheets/ksz8041nl_rnl.pdf
(probably newer) that simply states "Indicates silicon revision". This change
is reflected also in document's revision history.
Ilija
--
Configure bugmail: http://bugs.ecos.sourceware.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug.