This is the mail archive of the
cygwin
mailing list for the Cygwin project.
RE: Could not resolve hostname xxx: Bad address
- From: Peter Hancox <phancox at dtc dot com dot au>
- To: cygwin at cygwin dot com
- Date: Sun, 20 Apr 2014 19:43:41 +1000
- Subject: RE: Could not resolve hostname xxx: Bad address
- Authentication-results: sourceware.org; auth=none
- References: <8b71991a92969e0e400fec65c088e35d at mail dot gmail dot com> d174c27d0fad611e1da27bae93d1fc34 at mail dot gmail dot com
After running strace I was able to determine there was a problem calling
cygwin_gethostname.
This led me to a recent thread "1.7.29-2: Exception from
cygwin_gethostname". Replacing cygwin1.dll with the snapshot build
referenced in that thread fixed my problem also.
-----Original Message-----
From: Peter Hancox
Sent: Sunday, 20 April 2014 16:52
Subject: ssh: Could not resolve hostname xxx: Bad address
OpenSSH under Cygwin just started failing with "Could not resolve host
address". Originally this was actually using scp to transfer a file to a
local host, however, the attached example is a simplified test case.
Output from cygcheck attached.
PS D:\WorkArea\Cygwin> ssh -vvvv www.ibm.com OpenSSH_6.6, OpenSSL 1.0.1g 7
Apr 2014
ssh: Could not resolve hostname www.ibm.com: Bad address PS
D:\WorkArea\Cygwin> ping www.ibm.com
Pinging e3062.x.akamaiedge.net [23.37.133.247] with 32 bytes of data:
Reply from 23.37.133.247: bytes=32 time=19ms TTL=59 Reply from
23.37.133.247: bytes=32 time=19ms TTL=59 Reply from 23.37.133.247: bytes=32
time=19ms TTL=59 Reply from 23.37.133.247: bytes=32 time=20ms TTL=59
Ping statistics for 23.37.133.247:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round
trip times in milli-seconds:
Minimum = 19ms, Maximum = 20ms, Average = 19ms
Although this particular test was run from within Powershell, same results
from command shell and bash.
I am aware of the recent issue with mixed case host names but shouldn't be
relevant in this case and OpenSSH and all installed Cygwin software is at
latest versions. Have reinstalled OpenSSH just to be sure and still fails.
Note that I have exactly the same Cygwin (x64) installed on a Windows Server
2012 instance running on Amazon EC2 and it continues to work fine.
Not sure when this broke but I probably haven't attempted to use ssh from
this machine for a couple of months. One thing that has definitely changed
since the last use (and is different to the working instance) is
installation of Windows 8.1 Update 1 patch.
Running with "-vvvv" doesn't give any additional information other than
version numbers. Nothing in Windows event logs. Suggestion for debugging
further?
REGARDS
Peter
============================================================
DELTA Technology Consulting Telephone: +61(2)9420-1800
PO Box 1383 Lane Cove Facsimile: +61(2)9420-1899
NSW 1595 Australia WWW: http://www.dtc.com.au
--
Problem reports: http://cygwin.com/problems.html
FAQ: http://cygwin.com/faq/
Documentation: http://cygwin.com/docs.html
Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple