This is the mail archive of the
cygwin
mailing list for the Cygwin project.
Re: Mount does not show Samba files
Larry Hall (Cygwin) wrote:
Arun Biyani wrote:
Larry Hall (Cygwin) wrote:
See your cygcheck output:
I have a crontab task which generates a cygcheck.log file every
night. I've just realized that
the cygcheck output of the cron task is quite different from when I
run cygcheck as a user.
I apologize for this. I've attached a cygcheck.log that I just
generated.
It would seem that your cron job is not actually generating this file
regularly. The one you sent previously clearly said that you had
1.5.19-4
of the cygwin package installed. You cannot have two versions installed.
So I presume that the cron entry to automatically generate this file
hasn't
run since before you upgraded. Since you would have had to stop the cron
(and any other service) to upgrade (without reboot at least), I can see
the possibility of you doing this and not restarting it again. But
that's
just speculation.
CYGWIN = 'nontsec'
I only see this for the cron task. I start cron by typing "cygrunsrv
--start cron". Perhaps its
generated by cygrunsrv.
No. You apparently ran '/bin/cron-config' and answered "no" to the
question:
Do you want the daemon to run with ntsec? (yes/no)
This must be set in your environment somewhere. Possibly this is
introduced
by Altera tools Dave mentioned (thanks Dave). If you don't know why
it's set,
find it and remove it. Alternatively, if you cannot find it for some
reason, at least unset it in your cygwin.bat file (assuming you
start Cygwin
that way). This is a cheap hack though. You're better off removing
the
setting for real.
[tmp$:554] echo $CYGWIN bash: CYGWIN: unbound variable
[tmp$:555] set | grep CYGWIN
[tmp$:556] cygcheck -srv | grep CYGWIN
Environment : CYGWIN="nontsec" ---- cron
settings
Environment : CYGWIN="ntsec notraverse" ---- exim
settings
Display name : CYGWIN syslogd
[tmp$:557]
Your cygcheck says you have cygwin package version 1.5.19-4. The
current
version is 1.5.21-2.
1831k 2006/07/30 C:\win\cygwin\bin\cygwin1.dll - os=4.0 img=1.0 sys=4.0
"cygwin1.dll" v0.0 ts=2006/7/30 10:21
Cygwin DLL version info:
DLL version: 1.5.21
DLL epoch: 19
The dll seems to be correct version.
Yes, I'd agree.
I think you're getting a conflicts between Altera and Cygwin.
Removing Altera
is likely not the solution to the problem you see but it will avoid
other/
future problems. The solution to your current problem is to
regenerate your
passwd/group files, as Dave mentioned. At least this should work if
your
user and the resource available are in the same domain.
I will remove Altera from the path and report back if it helps.
Great!
Hi Larry,
Thx for your help. I opened a dos command window. Typed "dir Y:" and saw
files and directories
that I expected to see from my home directory on Linux. Then (transcript
below) I tried Cygwin.
Still does not seem to work. This is after creating a new passwd & group
file and ensuring that
the user name is correct. I've split $PATH for readability.
Arun
[tmp$:509] whoami
abiyani
[tmp$:510] mount Y: /mnt/y
mount: defaulting to '--no-executable' flag for speed since native path
references a remote share. Use '-f' option to override.
[tmp$:511] df
Filesystem Size Used Avail Use% Mounted on
C:\win\cygwin\bin 75G 44G 31G 59% /usr/bin
C:\win\cygwin\lib 75G 44G 31G 59% /usr/lib
C:\win\cygwin 75G 44G 31G 59% /
Y: 31G 26G 5.3G 83% /mnt/y
c: 75G 44G 31G 59% /c
i: 592G 574G 18G 98% /i
s: 38G 7.1G 31G 19% /s
[tmp$:512] ls /mnt/y
ls: /mnt/y: No such file or directory
[tmp$:513] echo $PATH
~/wrk/sys/bin:~/wrk/pre-bin:~/bin:/usr/local/bin:/bin:/usr/bin:/usr/ucb:/sbin:/usr/sbin:/usr/X11R6/bin:
~/wrk/bin:/c/WINDOWS/system32:/c/WINDOWS:/c/WINDOWS/System32/Wbem:
/c/win/mingw/bin:/c/win/msys/bin
[tmp$:514]
--
Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple
Problem reports: http://cygwin.com/problems.html
Documentation: http://cygwin.com/docs.html
FAQ: http://cygwin.com/faq/