This is the mail archive of the cygwin mailing list for the Cygwin project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

Re: cvs over ssh with tcsh


Ugh, top-posting...  Reformatted.

On Wed, 5 Apr 2006, Jay Abel wrote:

> ----- Original Message -----
> From: "Igor Peshansky" <pechtcha@XX.XXX.XXX>
> To: "Jay Abel" <jabel@XXXX.XXX>
> Cc: <cygwin@XXXXXX.XXX>

<http://cygwin.com/acronyms/#PCYMTNQREAIYR>.  Thanks.

> Sent: Wednesday, April 05, 2006 3:18 AM
> Subject: Re: cvs over ssh with tcsh
>
> > On Tue, 4 Apr 2006, Jay Abel wrote:
> >
> > > This is just a ping to see if anyone has noticed problems running
> > > cvs in command line server mode over ssh with tcsh installed as the
> > > login shell (in /etc/passwd).  After a lot of testing (thanks Rene
> > > Berber) is seems that the problem only occurs when tcsh is my login
> > > shell.  If I change my login shell to /bin/bash, the problem goes
> > > away.
> > >
> > > versions are as follows:
> > > [snip]
> > > I googled 'ssh tcsh' and found that some programs (sftp) don't like
> > > noisy rc scripts, but
> >
> > cvs also doesn't like noisy scripts.
> >
> > > tcsh -C /bin/true
> > >
> > > produces no output.
> >
> > I take it you meant "tcsh -c /bin/true" (lowercase "c").  Your test
> > above only tests tcsh in non-login mode.  Try 'tcsh -l' or '(exec -l
> > tcsh)' from bash instead.
> >
> > > The symptoms of failure that I obsererve fall into two categories:
> > >
> > > 1. cvs client reports 'unrecognized command' along with a piece of
> > > one of the files uploaded displayed as the offending command, or
> > >
> > > 2. cvs trace stops dead, with both client and server processes in an
> > > O state by ps.
> >
> > Both of these seem to indicate extra output from somewhere.
> >
> > > [snip]
> > > At this point I'm mostly interested in whether anyone else has ever
> > > seen this behavior.  If not, I'll continue to try to acertain what
> > > it is about my tcsh configuration which is causing the problem.
> >
> > I'd say you have a noisy .login (or /etc/csh.login)...  If you rule
> > that out, we can look for other causes.
> >
> > FWIW, simply "ssh user@host cvs server" should show you all of the
> > output your cvs client sees (and complains about)...
>
> Test Number 1: Is tcsh login noisy?
>
> [jabel@jabelxp][home/jabel] % tcsh -l < /dev/null | od -ab
> tcsh -l < /dev/null | od -ab
> 0000000
> [jabel@jabelxp][home/jabel] %

Ok, fair enough.  FWIW, I was actually wrong -- "ssh u@h command" doesn't
use a login shell.  In fact, even though cvs doesn't *like* the noise, it
doesn't complain about it in the same way (i.e., putting an "echo Hi" into
.tcshrc, I get back "cvs update: warning: unrecognized response `Hi' from
cvs server").  Also, I get this as essentially the first thing after
"Starting server:", whereas you get this in the middle of updating...

> Test Number 2: does problem exist with CVS?
>
> [jabel@jabelxp][jabel/cvstemp] % cvs -t up
> cvs -t up
> -> main loop with CVSROOT=:ext:jayabel.com:/home/spring2006
> -> Starting server: /bin/ssh jayabel.com cvs server
> -> Sending file `report.pdf' to server
> -> Sending file `report.tex' to server
> unrecognized request `OF'
> -> Lock_Cleanup()
> -> Lock_Cleanup()
> [jabel@jabelxp][jabel/cvstemp] %
>
> Am I missing something here?  If cvs uses a plain old login shell, isn't
> it subject to the vagaries of things like CTRL-z suspending the job,
> CTRL-s suspending output, and certain other control and escape sequences
> sending back all kinds of chatter?

It doesn't -- that was a red herring.  However, you didn't try the last
test I proposed, i.e., "ssh jayabel.com cvs server".

> Is there something obvious I'm supposed to have in my startup scripts
> that turns all that stuff off if the connection is supposed to be
> binary, and how does CVS tell ssh it wants a binary shell?
>
> I'm currently using /bin/ssh as my CVS_RSH variable, but at least
> according to the trace output cvs isn't sending any special options.
> Do I need a wrapper script to create a silent connection?

Nah, I think we're barking up the wrong tree here.

One other observation is that, when I put something in the .rc script, my
cvs complained about "unrecognized response", whereas yours complains
about "unrecognized request".  This makes me think that it's not the
server sending something bad, it's the client.  You could write a cvs
wrapper script that does something like

tee CVS_OUT | /bin/cvs "$@"

stick it in the PATH before /bin, and examine ~/CVS_OUT for commands sent
from the client.
HTH,
	Igor
-- 
				http://cs.nyu.edu/~pechtcha/
      |\      _,,,---,,_	    pechtcha@cs.nyu.edu | igor@watson.ibm.com
ZZZzz /,`.-'`'    -.  ;-;;,_		Igor Peshansky, Ph.D. (name changed!)
     |,4-  ) )-,_. ,\ (  `'-'		old name: Igor Pechtchanski
    '---''(_/--'  `-'\_) fL	a.k.a JaguaR-R-R-r-r-r-.-.-.  Meow!

"Las! je suis sot... -Mais non, tu ne l'es pas, puisque tu t'en rends compte."
"But no -- you are no fool; you call yourself a fool, there's proof enough in
that!" -- Rostand, "Cyrano de Bergerac"

--
Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple
Problem reports:       http://cygwin.com/problems.html
Documentation:         http://cygwin.com/docs.html
FAQ:                   http://cygwin.com/faq/


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]