This is the mail archive of the cygwin@sourceware.cygnus.com mailing list for the Cygwin project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]

Re: [ANN] perl5.5.660


Geez. let's try this again. I wanted to send replies to two different
messages on this list. Naturally, I attached message B to the reply meant
for message A.  Here's the REAL reply that should go in the perl5.5.660
thread.

I installed the 20000227 cygwin-inst and the 20000228 cygwin1.dll, and
re-ran the perl harness test. The new results are much improved:

Same binary as before, tested under 'CYGWIN=binmode tty ntea' 

Failed Test  Status Wstat Total Fail  Failed  List of failed
-------------------------------------------------------------------------------
lib/io_poll.t                 8    1  12.50%  4
lib/odbm.t                   64    1   1.56%  2
op/grent.t                    1    1 100.00%  1
op/taint.t                  149    3   2.01%  1, 3, 31
pragma/warnings             348    1   0.29%  117
4 tests and 58 subtests skipped.
Failed 5/234 test scripts, 97.86% okay. 7/11679 subtests failed, 99.94% 
okay.


Same binary, but this time with CYGWIN='binmode tty ntea ntsec'

Failed Test  Status Wstat Total Fail  Failed  List of failed
-------------------------------------------------------------------------------
lib/filepath.t  255 65280     4    3  75.00%  1, 3-4
lib/glob-basic.               9    1  11.11%  2
lib/io_dir.t                 10    1  10.00%  3
lib/io_poll.t                 8    1  12.50%  4
lib/io_unix.t     0    15     5    4  80.00%  2-5
lib/odbm.t       13  3328    64   62  96.88%  2, 4-64
op/grent.t                    1    1 100.00%  1
op/stat.t                    58    8  13.79%  18-21, 26-27, 57-58
op/taint.t                  149    3   2.01%  1, 3, 31
pragma/warnings             348    1   0.29%  117
4 tests and 58 subtests skipped.
Failed 10/234 test scripts, 95.73% okay. 85/11679 subtests failed, 99.27%
okay.

--Chuck


On Thu, 2 Mar 2000, Charles Wilson wrote:

> FWIW, the problems described below were fixed with the Feb 28 snapshot.
> That includes the 100% usage problem and the weird configure failures
> when building.
> 
> --Chuck
> 
> "Charles S. Wilson" wrote:
> > 
> > perl5.5.660 is now available at
> > http://cygutils.netpedia.net/V1.1/perl-5.5.660/ You will also find a few
> > precompiled modules at that location.
> > 
> > This might be the last beta before perl5.6 is released, so please bang
> > on it if you've the inclination. I've found one problem already that I
> > couldn't figure out: attempting to execute any routine from the libnet
> > module causes perl to dump core immediately. If anybody's got any ideas
> > about how to fix that, please let me know.
> > 
> > perl5.5.660 was built using the following external libraries from the
> > cygutils archive:
> >   libcrypt
> >   cygipc-1.05
> >   db-2.7.7
> >   gdbm-1.8.0-1
> > and with the following environment settings. ntsec was not enabled.
> >   CYGWIN=binmode tty ntea
> >   built and installed by a non-administrator user
> > 
> > Anyway, here are the perl harness results:
> > 
> > Failed Test  Status Wstat Total Fail  Failed  List of failed
> > -------------------------------------------------------------------------------
> > io/pipe.t         1   256    15   12  80.00%  7-15
> > lib/glob-basic.               9    7  77.78%  3-9
> > lib/io_pipe.t                10    2  20.00%  9-10
> > lib/io_poll.t                 8    1  12.50%  4
> > lib/odbm.t                   64    1   1.56%  2
> > lib/posix.t                  27    3  11.11%  8-10
> > op/grent.t                    1    1 100.00%  1
> > op/magic.t                   35    2   5.71%  3, 5
> > op/taint.t                  149   11   7.38%  1, 3, 31, 142-149
> > pragma/warnings             348    1   0.29%  117
> > 4 tests and 57 subtests skipped.
> > Failed 10/234 test scripts, 95.73% okay. 25/11679 subtests failed,
> > 99.79% okay.
> > 
> > --Chuck
> > 
> > ----------------------------------------------------------
> > ----------------------------------------------------------
> > FWIW, I also built and tested 5.5.660 with ntsec ON. Here are those
> > results
> > 
> > Failed Test  Status Wstat Total Fail  Failed  List of failed
> > -------------------------------------------------------------------------------
> > base/rs.t        13  3328    14   14 100.00%  1-14
> > io/pipe.t         1   256    15   12  80.00%  7-15
> > lib/dirhand.t                 5    1  20.00%  3
> > lib/filecache.t 255 65280     1    1 100.00%  1
> > lib/filepath.t  255 65280     4    4 100.00%  1-4
> > lib/glob-basic.               9    1  11.11%  2
> > lib/io_dir.t                 10    1  10.00%  3
> > lib/io_pipe.t                10    2  20.00%  9-10
> > lib/io_poll.t                 8    1  12.50%  4
> > lib/io_unix.t     0    15     5    4  80.00%  2-5
> > lib/ipc_sysv.t               16   16 100.00%  1-16
> > lib/ndbm.t       13  3328    64   50  78.12%  1-2, 4, 9, 19-64
> > lib/odbm.t                   64   62  96.88%  3-64
> > lib/posix.t                  27    3  11.11%  8-10
> > op/grent.t                    1    1 100.00%  1
> > op/magic.t                   35    2   5.71%  3, 5
> > op/stat.t                    58    8  13.79%  18-21, 26-27, 57-58
> > op/taint.t                  149    3   2.01%  1, 3, 31
> > pragma/warnings             348    1   0.29%  117
> > 4 tests and 44 subtests skipped.
> > Failed 19/234 test scripts, 91.88% okay. 171/11679 subtests failed,
> > 98.54% okay.
> 
> --
> Want to unsubscribe from this list?
> Send a message to cygwin-unsubscribe@sourceware.cygnus.com
> 
> 


--
Want to unsubscribe from this list?
Send a message to cygwin-unsubscribe@sourceware.cygnus.com


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]