This is the mail archive of the
cygwin-xfree
mailing list for the Cygwin XFree86 project.
RE: Reproducing the cygwin X problems
> From: cygwin-xfree-owner@cygwin.com
> [mailto:cygwin-xfree-owner@cygwin.com] On Behalf Of Phil Betts
> Sent: Thursday, February 19, 2009 1:34 PM
> It might have worked, but it was wrong. Do not set the DISPLAY
> environment variable. It is set by ssh -Y to something similar to
> "localhost:10.0" - the actual value depends on whether there are other
> forwarded X connections to that box.
I do not usually set it. I only did so in the sample to satisfy FAQ 6.1.
> BEFORE running ssh, you need to ensure that $DISPLAY is set correctly
> for local connections (probably ":0").
127.0.0.1:0, set by the system. I ordinarily do not check it, as I've never needed to set it when things worked.
> By specifying your own value for $DISPLAY inside the ssh session, you
> are ensuring that all X traffic bypasses the ssh tunnel and
> sets up its
> own (insecure and not encrypted) connection. This new
> connection must
> then go through the normal authentication process and it will appear
> to the X server as a remote connection, whereas the ssh connection
> looks like a local connection to the server.
FAQ needs updating, and my problem remains.
Thanks,
Mike