startx and startxwin.bat somewhat hanging xterm

["jose isaias cabrera" <jicman at cinops dot xerox dot com>]

Greetings!

Yesterday, everything was fine.  Today, after a reboot I have problems 
starting xterm.  However, I am able to start rdesktop ok, even though the 
screen is not displayed right.  (Attached are two files: .XWinrc and 
.xinitrc)

Here is the startxwin.bat output:

<StartXWinOutput>
startxwin.bat - Starting on Windows NT/2000/XP/2003
Welcome to the XWin X Server
Vendor: The Cygwin/X Project
Release: 6.8.2.0-2

Contact: cygwin-xfree@cygwin.com

XWin was started with the following command line:

XWin -multiwindow -clipboard -silent-dup-error -emulate3buttons

_XSERVTransmkdir: Cannot create /tmp/.X11-unix with root ownership
winValidateArgs - g_iNumScreens: 1 iMaxConsecutiveScreen: 1
(II) XF86Config is not supported
(II) See http://x.cygwin.com/docs/faq/cygwin-x-faq.html for more information
(==) FontPath set to 
"/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/TTF/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/CID/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
winPrefsLoadPreferences: /home/us319318/.XWinrc
LoadPreferences: syntax error, unexpected STRING line 59
winDetectSupportedEngines - Windows NT/2000/XP
winDetectSupportedEngines - DirectDraw installed
winDetectSupportedEngines - DirectDraw4 installed
winDetectSupportedEngines - Returning, supported engines 00000007
winSetEngine - Multi Window or Rootless => ShadowGDI
winAdjustVideoModeShadowGDI - Using Windows display depth of 16 bits per 
pixel
winScreenInit - Monitors do not all have same pixel format / display depth.
Using primary display only.
winAllocateFBShadowGDI - Creating DIB with width: 1024 height: 768 depth: 16
winFinishScreenInitFB - Masks: 0000f800 000007e0 0000001f
winInitVisualsShadowGDI - Masks 0000f800 000007e0 0000001f BPRGB 6 d 16 bpp 
16
null screen fn ReparentWindow
null screen fn RestackWindow
InitQueue - Calling pthread_mutex_init
InitQueue - pthread_mutex_init returned
InitQueue - Calling pthread_cond_init
InitQueue - pthread_cond_init returned
winInitMultiWindowWM - Hello
winInitMultiWindowWM - Calling pthread_mutex_lock ()
MIT-SHM extension disabled due to lack of kernel support
winMultiWindowXMsgProc - Hello
winMultiWindowXMsgProc - Calling pthread_mutex_lock ()
XFree86-Bigfont extension local-client optimization disabled due to lack of 
shared memory support in the kernel
(--) Setting autorepeat to delay=500, rate=31
(--) winConfigKeyboard - Layout: "00000409" (00000409)
(--) Using preset keyboard for "English (USA)" (409), type "4"
Rules = "xorg" Model = "pc105" Layout = "us" Variant = "(null)" Options = 
"(null)"
(--) 3 mouse buttons found
Could not init font path element /usr/X11R6/lib/X11/fonts/CID/, removing 
from list!
winPointerWarpCursor - Discarding first warp: 512 384
winInitMultiWindowWM - pthread_mutex_lock () returned.
winMultiWindowXMsgProc - pthread_mutex_lock () returned.
winMultiWindowXMsgProc - pthread_mutex_unlock () returned.
winMultiWindowXMsgProc - DISPLAY=127.0.0.1:0.0
winInitMultiWindowWM - pthread_mutex_unlock () returned.
winInitMultiWindowWM - DISPLAY=127.0.0.1:0.0
winProcEstablishConnection - Hello
winInitClipboard ()
winProcEstablishConnection - winInitClipboard returned.
winClipboardProc - Hello
DetectUnicodeSupport - Windows NT/2000/XP
winClipboardProc - DISPLAY=127.0.0.1:0.0
winMultiWindowXMsgProc - XOpenDisplay () returned and successfully opened 
the display.
winInitMultiWindowWM - XOpenDisplay () returned and successfully opened the 
display.
winClipboardProc - XOpenDisplay () returned and successfully opened the 
display.

winProcSetSelectionOwner - Clipboard not yet started, aborting.
winProcSetSelectionOwner - Clipboard not yet started, aborting.
winOverrideDefaultIcon: LoadImageComma(reinstall.ico) failed
winOverrideDefaultIcon: LoadImageComma(reinstall.ico) failed

</StartXWinOutput>
Here is the startxwin.bat source:

<StartXWinSource>
@echo off
SET DISPLAY=127.0.0.1:0.0


REM
REM The path in the CYGWIN_ROOT environment variable assignment assume
REM that Cygwin is installed in a directory called 'cygwin' in the root
REM directory of the current drive.  You will only need to modify
REM CYGWIN_ROOT if you have installed Cygwin in another directory.  For
REM example, if you installed Cygwin in \foo\bar\baz\cygwin, you will need
REM to change \cygwin to \foo\bar\baz\cygwin.
REM
REM This batch file will almost always be run from the same drive (and
REM directory) as the drive that contains Cygwin/X, therefore you will
REM not need to add a drive letter to CYGWIN_ROOT.  For example, you do
REM not need to change \cygwin to c:\cygwin if you are running this
REM batch file from the C drive.
REM

SET CYGWIN_ROOT=\cygwin

SET PATH=.;%CYGWIN_ROOT%\bin;%CYGWIN_ROOT%\usr\X11R6\bin;%PATH%

SET XAPPLRESDIR=/usr/X11R6/lib/X11/app-defaults
SET XCMSDB=/usr/X11R6/lib/X11/Xcms.txt
SET XKEYSYMDB=/usr/X11R6/lib/X11/XKeysymDB
SET XNLSPATH=/usr/X11R6/lib/X11/locale


REM
REM Cleanup after last run.
REM

if not exist %CYGWIN_ROOT%\tmp\.X11-unix\X0 goto CLEANUP-FINISH
attrib -s %CYGWIN_ROOT%\tmp\.X11-unix\X0
del %CYGWIN_ROOT%\tmp\.X11-unix\X0

:CLEANUP-FINISH
if exist %CYGWIN_ROOT%\tmp\.X11-unix rmdir %CYGWIN_ROOT%\tmp\.X11-unix


REM
REM The error "Fatal server error: could not open default font 'fixed'" is
REM caused by using a DOS mode mount for the mount that the Cygwin/X
REM fonts are accessed through.  See the Cygwin/X FAQ for more
REM information:
REM http://x.cygwin.com/docs/faq/cygwin-x-faq.html#q-error-font-eof
REM

if "%OS%" == "Windows_NT" goto OS_NT

REM Windows 95/98/Me
echo startxwin.bat - Starting on Windows 95/98/Me

goto STARTUP

:OS_NT

REM Windows NT/2000/XP/2003
echo startxwin.bat - Starting on Windows NT/2000/XP/2003

:STARTUP

REM Brief descriptions of XWin-specific options:
REM
REM -screen scr_num [width height]
REM      Enable screen scr_num and optionally specify a width and
REM      height for that screen.
REM      Most importantly, any parameters specified before the first -screen
REM      parameter apply to all screens.  Any options after the 
first -screen
REM      parameter apply only to the screen that precedes the parameter.
REM      Example:
REM          XWin -fullscreen -screen 0 -screen 1 -depth 8 -screen 2
REM      All screens will be fullscreen, but screen 2 will be depth 8, while
REM      screens 0 and 1 will be the default depth (whatever depth Windows
REM      is currently running at).
REM -multiwindow
REM      Start an integrated Windows-based window manager.  Not to be used
REM      with -rootless nor -fullscreen.
REM -rootless
REM      Use a transparent root window with an external window manager
REM      (such as twm).  Not to be used with -multiwindow nor
REM      with -fullscreen.
REM -fullscreen
REM      Use a window as large as possible on the primary monitor.
REM -multiplemonitors
REM      Create a root window that covers all monitors on a
REM      system with multiple monitors.
REM -clipboard
REM      Enable the integrated version of xwinclip.  Do not use in
REM      conjunction with the xwinclip program.
REM -depth bits_per_pixel
REM      Specify the screen depth to run at (in bits per pixel) using a
REM      DirectDraw-based engine in conjunction with the -fullscreen
REM      option, ignored if the -fullscreen option is not specified.
REM      By default, you will be using a DirectDraw based engine on any
REM      system that supports it.
REM -unixkill
REM      Trap Ctrl+Alt+Backspace as a server shutdown key combination.
REM -nounixkill
REM      Disable Ctrl+Alt+Backspace as a server shutdown key combination 
(default).
REM      Example:
REM          XWin -unixkill -screen 0 -screen 1 -screen 2 -nounixkill
REM      Screens 0 and 1 will allow Ctrl+Alt+Backspace, but screen 2 will 
not.
REM -winkill
REM      Trap Alt+F4 as a server shutdown key combination (default).
REM -nowinkill
REM      Disable Alt+F4 as a server shutdown key combination.
REM -scrollbars
REM      Enable resizing of the server display window.  Do not use in 
conjunction
REM      with -multiwindow nor with -rootless.
REM -nodecoration
REM      Draw the server root window without a title bar or border.
REM      Do not use with -mutliwindow nor with -rootless.
REM -lesspointer
REM      Hide the Windows mouse cursor anytime it is over any part of the
REM      window, even if Cygwin/X is not the window with the focus.
REM -refresh rate_in_Hz
REM      Specify a refresh rate to use when used with the -fullscreen 
option.
REM -trayicon
REM      Enable the tray icon (default).
REM -notrayicon
REM      Disable the tray icon.
REM      Example:
REM          XWin -notrayicon -screen 0 -screen 1 -screen 2 -trayicon
REM      Screens 0 and 1 will not have tray icons, but screen 2 will.
REM -emulate3buttons [timeout]
REM      Emulate 3 button mouse with an optional timeout in milliseconds.
REM -xf86config
REM      Specify an XF86Config-style configuration file.
REM -keyboard
REM      Specify a keyboard device from the configuration file.


REM
REM Startup the programs
REM


REM Startup the X Server with the integrated Windows-based window manager.
REM WARNING: Do not use 'xwinclip' in conjunction with the ``-clipboard''
REM command-line parameter for XWin.  Doing so would start two clipboard
REM managers, which is never supposed to happen.

REM run
XWin -multiwindow -clipboard -silent-dup-error -emulate3buttons


REM Startup an xterm, using bash as the shell.

REM run xterm -bdc -mb -pc -ti vt100 -e /usr/bin/bash -l


REM
REM Startup the twm window manager.
REM WARNING: Do not use an external window manager in conjunction with
REM the ``-multiwindow'' command-line parameter for XWin.  Doing so
REM would start two window managers, which is never supposed to happen.
REM

REM run twm


REM Set a background color.  Only needed when not using -multwindow for 
XWin.

REM run xsetroot -solid aquamarine4

</StartXWinSource>

thanks for the help.

jic

Attachment: .xinitrc
Description: Binary data

Attachment: .XWinrc
Description: Binary data