This is the mail archive of the
cygwin-xfree@cygwin.com
mailing list for the Cygwin XFree86 project.
Re: Bug report: Using Cygwin-Xfree through Remote Desktop Sharing(RDP)
- From: Harold L Hunt II <huntharo at msu dot edu>
- To: cygwin-xfree at cygwin dot com
- Date: Mon, 09 Sep 2002 13:29:17 -0400
- Subject: Re: Bug report: Using Cygwin-Xfree through Remote Desktop Sharing(RDP)
- References: <MPBBLPFLCFBIDNIENJFJEEOCKPAA.jc.gervais@videotron.ca>
- Reply-to: cygwin-xfree at cygwin dot com
Jean-Claude,
How about with -engine 1?
Harold
Jean-Claude Gervais wrote:
-----Original Message-----
From: cygwin-xfree-owner@cygwin.com
[mailto:cygwin-xfree-owner@cygwin.com]On Behalf Of Thomas Chadwick
Sent: Monday, September 09, 2002 12:08 PM
To: cygwin-xfree@cygwin.com
Subject: Re: Bug report: Using Cygwin-Xfree through Remote Desktop Sharing
(RDP)
Sounds similar to this problem I reported a while back...
http://www.cygwin.com/ml/cygwin-xfree/2002-06/msg00373.html
What's in /tmp/XWin.log?
This -
ddxProcessArgument - Initializing default screens
winInitializeDefaultScreens - w 1024 h 768
winInitializeDefaultScreens - Returning
winDetectSupportedEngines - Windows NT/2000/XP
winDetectSupportedEngines - DirectDraw installed
winDetectSupportedEngines - Allowing PrimaryDD
winDetectSupportedEngines - DirectDraw4 installed
winDetectSupportedEngines - Returning, supported engines 0000001f
winSetEngine - Using Shadow DirectDraw NonLocking
winAdjustVideoModeShadowDDNL - Using Windows display depth of 32 bits per
pixel
winAllocateFBShadowDDNL - Not changing video mode
winAllocateFBShadowDDNL - lPitch: 4096
winFinishScreenInitFB - Masks: 00ff0000 0000ff00 000000ff
winInitVisualsShadowDDNL - Masks 00ff0000 0000ff00 000000ff BPRGB 8 d 24 bpp
32
winCreateDefColormap - Deferring to fbCreateDefColormap ()
winScreenInit - returning
winBltExposedRegionsShadowDDNL - IDirectDrawSurface4_Blt reported that the
primary surface was lost, trying to restore, retry:
1winBltExposedRegionsShadowDDNL - IDirectDrawSurface4_Blt reported that the
primary surface was lost, trying to restore, retry: 2
winShadowUpdateDDNL - IDirectDrawSurface4_Blt () failed: 887601c2
winShadowUpdateDDNL - IDirectDrawSurface4_Blt () failed: 887601c2
winShadowUpdateDDNL - IDirectDrawSurface4_Blt () failed: 887601c2
winShadowUpdateDDNL - IDirectDrawSurface4_Blt () failed: 887601c2
.... A lot of these deleted, but there were TONS of them.
winBltExposedRegionsShadowDDNL - IDirectDrawSurface4_Blt reported that the
primary surface was lost, trying to restore, retry:
1winBltExposedRegionsShadowDDNL - IDirectDrawSurface4_Blt reported that the
primary surface was lost, trying to restore, retry: 2
winShadowUpdateDDNL - IDirectDrawSurface4_Blt () failed: 887601c2
winShadowUpdateDDNL - IDirectDrawSurface4_Blt () failed: 887601c2
winShadowUpdateDDNL - IDirectDrawSurface4_Blt () failed: 887601c2
... More of these lines deleted ...
winBltExposedRegionsShadowDDNL - IDirectDrawSurface4_Blt reported that the
primary surface was lost, trying to restore, retry:
1winBltExposedRegionsShadowDDNL - IDirectDrawSurface4_Blt reported that the
primary surface was lost, trying to restore, retry: 2
winShadowUpdateDDNL - IDirectDrawSurface4_Blt () failed: 887601c2
winShadowUpdateDDNL - IDirectDrawSurface4_Blt () failed: 887601c2
winShadowUpdateDDNL - IDirectDrawSurface4_Blt () failed: 887601c2
... More of these lines deleted ...
winBltExposedRegionsShadowDDNL - IDirectDrawSurface4_Blt reported that the
primary surface was lost, trying to restore, retry:
1winBltExposedRegionsShadowDDNL - IDirectDrawSurface4_Blt reported that the
primary surface was lost, trying to restore, retry: 2winShadowUpdateDDNL -
IDirectDrawSurface4_Blt () failed: 887601c2
winShadowUpdateDDNL - IDirectDrawSurface4_Blt () failed: 887601c2
winShadowUpdateDDNL - IDirectDrawSurface4_Blt () failed: 887601c2
winShadowUpdateDDNL - IDirectDrawSurface4_Blt () failed: 887601c2
And on and on...
From: Jean-Claude Gervais <jc.gervais@videotron.ca>
Reply-To: cygwin-xfree@cygwin.com
To: Cygwin-XFree <cygwin-xfree@cygwin.com>
Subject: Bug report: Using Cygwin-Xfree through Remote Desktop Sharing
(RDP)
Date: Mon, 09 Sep 2002 11:00:28 -0400
This is complicated, so I'll try to be clear.
Let's say you have machine A, which is a Windows XP machine that has Cygwin
and Cygwin-XFree installed on it.
You use A to connect to B. B is a machine running Linux and X.
Everything so far works.
Then you use machine C (a machine running Windows 2000) to remote-control
machine A with Windows XP Remote Desktop Client (RDP).
Machine C can use machine A's Cygwin-XFree connection and view machine B.
No
problem.
However, when machine C breaks its connection to machine A, machine A's
Cygwin-XFree will no longer display machine B. It will instead display a
white screen in Cygwin-XFree.
Although I am pretty sure that A is still connected and controlling B, it
can no longer see B's display.
It seems like Remote Desktop Client mucks-up Cygwin-XFree.
I hope that that was clear enough.
Thanks.
_________________________________________________________________
Chat with friends online, try MSN Messenger: http://messenger.msn.com