This is the mail archive of the
cygwin-xfree@cygwin.com
mailing list for the Cygwin XFree86 project.
Re: Antwort: Re: Antwort: Re: XWin w2k xdmcp-query - no valid address
- From: Alexander Gottwald <Alexander dot Gottwald at informatik dot tu-chemnitz dot de>
- To: Ralf dot Boetnagel at dvg dot de
- Cc: cygwin-xfree at cygwin dot com
- Date: Wed, 6 Feb 2002 14:11:32 +0100 (MET)
- Subject: Re: Antwort: Re: Antwort: Re: XWin w2k xdmcp-query - no valid address
n Wed, 6 Feb 2002 Ralf.Boetnagel@dvg.de wrote:
>
> Hi,
>
> thanks again - for the fast response.
>
> Exceed runs just fine. I do have a TR-Card which is active, a deactivated
> Ethernet-Card (no connection to network) and a loopback device. No problems
> with Exceed there, tho.
> I do not have any tunneling device enabled.
Exceed uses an own interface for querying the network devices. Cygwin-xfree
uses the unix layer provided by cygwin1.dll. An in this layer, tokenring
is not handled.
>
> ls_netdev says:
>
> (the from-option should take care of the missing IP-Addr. imo)
>
> A101188@W0010B3D:/tmp/ls_netdev>./ls_netdev
> OS Version: Windows NT 5.0 Build 2195 Service Pack 2
> Querying devices using ioctl
This is what cygwin reports
> lo: family=TCP/IP (0) addr=127.0.0.1
> eth0: family=TCP/IP (0) addr=0.0.0.0
> eth1: family=TCP/IP (0) addr=0.0.0.0
> Querying devices using internal function
This is what the windows api reveals
eth0 (pgp)
> dwAddr=00000000
-> 0.0.0.0
> dwIndex=2
> dwMask=00000000
> dwBCastAddr=00000001
> dwReasmSize=65535
eth1 (fe575)
> dwAddr=00000000
-> 0.0.0.0
> dwIndex=16777220
> dwMask=00000000
> dwBCastAddr=00000001
> dwReasmSize=65535
tok0
> dwAddr=dcfdc906
->6.201.253.220
> dwIndex=33554437
> dwMask=00f0ffff
> dwBCastAddr=00000001
> dwReasmSize=65535
lo
> dwAddr=0100007f
->127.0.0.1
> dwIndex=1
> dwMask=000000ff
> dwBCastAddr=00000001
> dwReasmSize=65535
Interfaces.
Loopback -> Handled as lo
> wszName=
> dwIndex=1
> dwType=24
> bDescr=MS TCP Loopback interface
eth0 (pgp)
> wszName=
> dwIndex=2
> dwType=6
> bDescr=PGPnet Virtual Identity Adapter
eth1 (fe575)
> wszName=
> dwIndex=16777220
> dwType=6
> bDescr=FE575 Ethernet Adapter
Tokenring adapter?
> wszName=
> dwIndex=33554437
> dwType=9
> bDescr=MADGE_TR_MINIPORT_DRIVER: MDGNDIS5 5.95.90
> eth0: family=TCP/IP (0) addr=0.0.0.0
> eth1: family=TCP/IP (0) addr=0.0.0.0
> lo: family=TCP/IP (0) addr=127.0.0.1
is tok0: family=TCP/IP (0) addr=6.201.253.220 correct?
If so then I can create support for tokenring in the cygwin library.
bye
ago
--
Alexander.Gottwald@informatik.tu-chemnitz.de
http://www.gotti.org ICQ: 126018723
phone: +49 3725 349 80 80 mobile: +49 172 7854017
4. Chemnitzer Linux-Tag http://www.tu-chemnitz.de/linux/tag/lt4