This is the mail archive of the cygwin-xfree@cygwin.com mailing list for the Cygwin XFree86 project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

RE: XDMCP starting problems on Win2k & RH 7.2


Greetings,

Yep change the port to 177 start to show packets moving back and forth.
At some point a login screen came up.  I repeated and got the login
screen fairly quickly.  Try again and it has been waiting for about 
10 mins and still no screen.  I can see packets, but that is about it?

Any ideas?

--
Darryl Wagoner - WA1GON

Your phone line can be the life line for the unemployed. Sign up today at: 
http://www.proud-americans.org/  

*** Please pass the word to at least three others. ***        

"Evil triumphs when good men do nothing."  - Edmund Burke [1729-1797]



> -----Original Message-----
> From: cygwin-xfree-owner@cygwin.com
> [mailto:cygwin-xfree-owner@cygwin.com]On Behalf Of Harold Hunt
> Sent: Saturday, January 26, 2002 1:25 PM
> To: Darryl Wagoner; cygwin-xfree@cygwin.com
> Subject: RE: XDMCP starting problems on Win2k & RH 7.2
> 
> 
> Darryl,
> 
> According to the Linux XMDCP HOWTO
> (http://www.linuxdoc.org/HOWTO/XDMCP-HOWTO/gdm.html), the port number is
> 177, not 117.
> 
> I don't know what else to tell you.  Try using kdm instead.
> 
> Harold
> 
> > -----Original Message-----
> > From: cygwin-xfree-owner@cygwin.com
> > [mailto:cygwin-xfree-owner@cygwin.com]On Behalf Of Darryl Wagoner
> > Sent: Saturday, January 26, 2002 1:03 PM
> > To: cygwin-xfree@cygwin.com
> > Subject: XDMCP starting problems on Win2k & RH 7.2
> >
> >
> > Greetings,
> >
> > I think I have followed all the directions, but all I get is a
> > blank X screen with a pointer cursors.
> >
> > The request doesn't seem to be getting to the Linux system.
> >
> > I did a "tcpdump port 117" and I don't see any packets at all going
> > to Linux.
> >
> > In the docs it says to change gdm.conf
> >
> > [xdmcp]
> > Enable=1
> >
> > but all the other options have the Boolean true so I followed suit.
> >
> > [xdmcp]
> > Enable=true
> >
> > I did do a netstat to make sure xdm was listening on the correct port.
> >
> > Is it possible that Xwin.exe is sending to a different port?
> >
> > thanks
> >
> > --
> > Darryl Wagoner - WA1GON
> >
> > Your phone line can be the life line for the unemployed. Sign up
> > today at:
> > http://www.proud-americans.org/
> >
> > *** Please pass the word to at least three others. ***
> >
> > "Evil triumphs when good men do nothing."  - Edmund Burke [1729-1797]
> >
> >


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]