Re: BeagleBone CT-NG Tool Chain

[Douglas Jerome <douglas at ttylinux dot org>]

On 03/31/14 13:10, Paul Bußmann wrote:
> Hi,
>
> Am Sonntag, 30. März 2014, 10:12:32 schrieb Douglas Jerome:
> > Hello,
> >
> > I am trying to build a cross tool chain for
> > the BeagleBone (white), rev A3. The problem I have
> > is the kernel header files; the kernel is from
> >
> > https://github.com/beagleboard/kernel/tree/3.8
> >
> > and no kernel later than the 2013-03-22 from that tree
> > can properly export its header files.
> >
> > Is anyone using crosstool-ng to make a cross tool chain
> > for making the latest BeagleBone 3.8.4 kernel+modules?
> >
> > I've look at using
> > https://rcn-ee.net/deb/wheezy-armhf/v3.8.13-bone43/linux-headers-3.8.13-bone
> > 43_1.0wheezy_armhf.deb but I've not found a way to use that to successfully
> > build a crosstool-ng tool chain.
>
> Please see https://sourceware.org/ml/crossgcc/2014-02/msg00032.html and
> http://patchwork.ozlabs.org/patch/319409/
> Meanwhile some versions got bumped and I am not sure, if the patch I proposed
> still works. You may watch out for config "i586-mingw32msvc,armv4t-linux-
> gnueabi".
>
> Looking forward to your feedback.
>
> Best regards,
> Paul

Thanks, but your config doesn't match what I am doing.

To be more specific, I am using glibc, so the kernel
header files are somewhat important.

I may need to dive into the latest BeagleBone-patched
3.8 kernel source tree and try to find out how to fix
the header file export...


--
For unsubscribe information see http://sourceware.org/lists.html#faq