Re: Update: Still with Build failure for PPC405 using crosstool-ng-1.9.2

[Bryan Hundven <bryanhundven at gmail dot com>]

On Thu, Jan 20, 2011 at 3:23 PM, Chris Kerios <ckerios@cfl.rr.com> wrote:
> On 01/20/2011 05:52 PM, Bryan Hundven wrote:
>>
>> On Thu, Jan 20, 2011 at 2:43 PM, Chris Kerios<ckerios@cfl.rr.com> Âwrote:
>>>
>>> On Thu, Jan 20, 2011 at 6:15 AM, Kerios, Chris (KSC-ASRC-466)[ASRC
>>> AEROSPACE CORP]<chris.kerios@nasa.gov> Âwrote:
>>>>
>>>> -----Original Message-----
>>>> From: Khem Raj [mailto:raj.khem@gmail.com]
>>>> Sent: Thursday, January 20, 2011 1:17 AM
>>>> To: Kerios, Chris (KSC-ASRC-466)[ASRC AEROSPACE CORP]
>>>> Cc: Bryan Hundven; crossgcc maillist
>>>> Subject: Re: Update: Still with Build failure for PPC405 using
>>>> crosstool-ng-1.9.2
>>>>
>>>> On Wed, Jan 19, 2011 at 6:32 PM, Khem Raj<raj.khem@gmail.com> Âwrote:
>>>>>
>>>>> On Wed, Jan 19, 2011 at 6:14 PM, Kerios, Chris (KSC-ASRC-466)[ASRC
>>>>> AEROSPACE CORP]<chris.kerios@nasa.gov> Âwrote:
>>>>>>
>>>>>>
>>>>>> Sent from my iPad
>>>>>>
>>>>>> On Jan 19, 2011, at 8:51 PM, "Bryan Hundven"<bryanhundven@gmail.com>
>>>>>> wrote:
>>>>>>
>>>>>>> On Wed, Jan 19, 2011 at 3:00 PM, Kerios, Chris (KSC-ASRC-466)[ASRC
>>>>>>> AEROSPACE CORP]<chris.kerios@nasa.gov> Âwrote:
>>>>>>>>
>>>>>>>>
>>>>>>>> Sent from my iPad
>>>>>>>>
>>>>>>>> On Jan 19, 2011, at 5:55 PM, "Bryan Hundven"<bryanhundven@gmail.com>
>>>>>>>> wrote:
>>>>>>>>
>>>>>>>>> On Wed, Jan 19, 2011 at 2:41 PM, Kerios, Chris (KSC-ASRC-466)[ASRC
>>>>>>>>> AEROSPACE CORP]<chris.kerios@nasa.gov> Âwrote:
>>>>>>>>>>
>>>>>>>>>> Great! I'm happy to hear you were able to reproduce. So I'm not or
>>>>>>>>>> wasting your time.
>>>>>>>>>> Thanks
>>>>>>>>>
>>>>>>>>> Opps, with the build.log.bz2 email we went off list for a moment.
>>>>>>>>> This
>>>>>>>>> email mostly to bring the conversation back to the list.
>>>>>>>>>
>>>>>>>>> Chris,
>>>>>>>>>
>>>>>>>>> As I asked before, it would be nice if you didn't top post.
>>>>>>>>> Reason being is that Khem's response is now at the bottom of the
>>>>>>>>> email
>>>>>>>>> (like it should be), and your responses are at the top, making the
>>>>>>>>> email hard to read.
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>> Sent from my iPad
>>>>>>>>>>
>>>>>>>>>> On Jan 19, 2011, at 5:35 PM, "Khem Raj"<raj.khem@gmail.com>
>>>>>>>>>> Âwrote:
>>>>>>>>>>
>>>>>>>>>>> On Wed, Jan 19, 2011 at 11:33 AM, Kerios, Chris
>>>>>>>>>>> (KSC-ASRC-466)[ASRC
>>>>>>>>>>> AEROSPACE CORP]<chris.kerios@nasa.gov> Âwrote:
>>>>>>>>>>>>
>>>>>>>>>>>> Bryan/Khem,
>>>>>>>>>>>> Here is the last build.log file. ÄI set the log mode to ERROR.
>>>>>>>>>>>> So
>>>>>>>>>>>> it may not have everything you want so I can run it again with a
>>>>>>>>>>>> Deeper log level if you need me to.
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> -----Original Message-----
>>>>>>>>>>>> From: Kerios, Chris (KSC-ASRC-466)[ASRC AEROSPACE CORP]
>>>>>>>>>>>> Sent: Wednesday, January 19, 2011 2:23 PM
>>>>>>>>>>>> To: 'Khem Raj'; Bryan Hundven
>>>>>>>>>>>> Cc: crossgcc@sourceware.org
>>>>>>>>>>>> Subject: RE: Update: Still with Build failure for PPC405 using
>>>>>>>>>>>> crosstool-ng-1.9.2
>>>>>>>>>>>>
>>>>>>>>>>>> Bryan/Raj,
>>>>>>>>>>>> I've attached to output from the cross-compiler you requested.
>>>>>>>>>>>> ÄThere's a core and static directories where these files were
>>>>>>>>>>>> located. ÄThe
>>>>>>>>>>>> output was the same so I am just sending the shared one. ÄIt's a
>>>>>>>>>>>> small file
>>>>>>>>>>>> so I've just attached it. ÄI working on compressing the build
>>>>>>>>>>>> log and will
>>>>>>>>>>>> get that out to you shortly.
>>>>>>>>>>>> Chris
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> -----Original Message-----
>>>>>>>>>>>> From: Khem Raj [mailto:raj.khem@gmail.com]
>>>>>>>>>>>> Sent: Wednesday, January 19, 2011 2:03 PM
>>>>>>>>>>>> To: Bryan Hundven
>>>>>>>>>>>> Cc: Kerios, Chris (KSC-ASRC-466)[ASRC AEROSPACE CORP];
>>>>>>>>>>>> crossgcc@sourceware.org
>>>>>>>>>>>> Subject: Re: Update: Still with Build failure for PPC405 using
>>>>>>>>>>>> crosstool-ng-1.9.2
>>>>>>>>>>>>
>>>>>>>>>>>> On Wed, Jan 19, 2011 at 10:26 AM, Bryan Hundven
>>>>>>>>>>>> <bryanhundven@gmail.com> Âwrote:
>>>>>>>>>>>>>
>>>>>>>>>>>>> On Wed, Jan 19, 2011 at 10:15 AM, Kerios, Chris
>>>>>>>>>>>>> (KSC-ASRC-466)[ASRC
>>>>>>>>>>>>> AEROSPACE CORP]<chris.kerios@nasa.gov> Âwrote:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> OK, let's see if I can get all this for you:
>>>>>>>>>>>>>> On my host machine that I am trying to build for:
>>>>>>>>>>>>>> x86 - Fedora 14
>>>>>>>>>>>>>> gcc 4.5.1
>>>>>>>>>>>>>> binutils 2.20
>>>>>>>>>>>>>> linux 2.6.35
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> For my target/embedded host I am trying to build a cross
>>>>>>>>>>>>>> toolchain which I am pasting in the beginning of the
>>>>>>>>>>>>>> build.log:
>>>>>>>>>>>>>> [INFO ] ÄPerforming some trivial sanity checks [INFO ] ÄBuild
>>>>>>>>>>>>>> started
>>>>>>>>>>>>>> 20110119.130036 [INFO ] ÄBuilding environment variables [WARN
>>>>>>>>>>>>>> ]
>>>>>>>>>>>>>> Directory '/home/chris/src' does not exist.
>>>>>>>>>>>>>> [WARN ] ÄWill not save downloaded tarballs to local storage.
>>>>>>>>>>>>>> [EXTRA] ÄPreparing working directories [EXTRA] ÄInstalling
>>>>>>>>>>>>>> user-supplied crosstool-NG configuration [EXTRA]
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> =================================================================
>>>>>>>>>>>>>> [EXTRA] ÄDumping internal crosstool-NG configuration [EXTRA]
>>>>>>>>>>>>>> Building a toolchain for:
>>>>>>>>>>>>>> [EXTRA] Ä Ä Äbuild Ä= i686-pc-linux-gnu [EXTRA] Ä Ä Ähost Ä =
>>>>>>>>>>>>>> i686-pc-linux-gnu [EXTRA] Ä Ä Ätarget = powerpc-405-linux-gnu
>>>>>>>>>>>>>> [EXTRA]
>>>>>>>>>>>>>> Dumping internal crosstool-NG configuration: done in 0.46s (at
>>>>>>>>>>>>>> 00:05)
>>>>>>>>>>>>>> [INFO ]
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> =================================================================
>>>>>>>>>>>>>> [INFO ] ÄRetrieving needed toolchain components' tarballs
>>>>>>>>>>>>>> [EXTRA]
>>>>>>>>>>>>>> Retrieving 'linux-2.6.31.14'
>>>>>>>>>>>>>> [EXTRA] Ä ÄRetrieving 'gmp-4.3.2'
>>>>>>>>>>>>>> [EXTRA] Ä ÄRetrieving 'mpfr-2.4.2'
>>>>>>>>>>>>>> [EXTRA] Ä ÄRetrieving 'binutils-2.19.1'
>>>>>>>>>>>>>> [EXTRA] Ä ÄRetrieving 'gcc-4.3.2'
>>>>>>>>>>>>>> [EXTRA] Ä ÄRetrieving 'eglibc-2_10'
>>>>>>>>>>>>>> [EXTRA] Ä ÄRetrieving 'dmalloc-5.5.2'
>>>>>>>>>>>>>> [EXTRA] Ä ÄRetrieving 'duma_2_5_15'
>>>>>>>>>>>>>> [EXTRA] Ä ÄRetrieving 'gdb-6.8'
>>>>>>>>>>>>>> [EXTRA] Ä ÄRetrieving 'ncurses-5.7'
>>>>>>>>>>>>>> [EXTRA] Ä ÄRetrieving 'expat-2.0.1'
>>>>>>>>>>>>>> [INFO ] ÄRetrieving needed toolchain components' tarballs:
>>>>>>>>>>>>>> done
>>>>>>>>>>>>>> in
>>>>>>>>>>>>>> 601.03s (at 10:07) [INFO ]
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> =================================================================
>>>>>>>>>>>>>
>>>>>>>>>>>>> Chris,
>>>>>>>>>>>>>
>>>>>>>>>>>>> Could you post your config somewhere? Preferably on
>>>>>>>>>>>>> pastbin.com.
>>>>>>>>>>>>> I want to try installing fc14 and see if I can reproduce your
>>>>>>>>>>>>> issue.
>>>>>>>>>>>>>
>>>>>>>>>>>>>> -----Original Message-----
>>>>>>>>>>>>>> From: Khem Raj [mailto:raj.khem@gmail.com]
>>>>>>>>>>>>>> Sent: Wednesday, January 19, 2011 12:55 PM
>>>>>>>>>>>>>> To: Kerios, Chris (KSC-ASRC-466)[ASRC AEROSPACE CORP]
>>>>>>>>>>>>>> Cc: crossgcc@sourceware.org
>>>>>>>>>>>>>> Subject: Re: Update: Still with Build failure for PPC405 using
>>>>>>>>>>>>>> crosstool-ng-1.9.2
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> On Wed, Jan 19, 2011 at 9:49 AM, Kerios, Chris
>>>>>>>>>>>>>> (KSC-ASRC-466)[ASRC
>>>>>>>>>>>>>> AEROSPACE CORP]<chris.kerios@nasa.gov> Âwrote:
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Hi Raj,
>>>>>>>>>>>>>>> Hmmm...I just tried rebuilding 1.9.2 with eglibc 2.10 and it
>>>>>>>>>>>>>>> stopped and errored out at the same spot with the same error.
>>>>>>>>>>>>>>> 2.10 is the only other release offered in the 1.9.2
>>>>>>>>>>>>>>> menuconfig.
>>>>>>>>>>>>>>> ÄI
>>>>>>>>>>>>>>> would send you my build.log except that is over 16MB
>>>>>>>>>>>>>
>>>>>>>>>>>>> bzip2 build.log
>>>>>>>>>>>>>
>>>>>>>>>>>>> If you want, you can send the bzip'd log file to me directly,
>>>>>>>>>>>>> bypassing the list.
>>>>>>>>>>>>>
>>>>>>>>>>>>> Khem, if you would like the bzip'd log as well, I will forward
>>>>>>>>>>>>> it
>>>>>>>>>>>>> to you.
>>>>>>>>>>>>> Just trying to save space on the ml-server.
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> yes please do send me.
>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>>> and my email system won't transfer it. ÄI also tried
>>>>>>>>>>>>>>> pastebin.com
>>>>>>>>>>>>>>> but they will only take up to 1MB. ÄIs there anything
>>>>>>>>>>>>>>> specific
>>>>>>>>>>>>>>> in
>>>>>>>>>>>>>>> the build log I can send you? ÄCurrently, the debug level is
>>>>>>>>>>>>>>> set to EXTRA. ÄI can back this down and it should cut down on
>>>>>>>>>>>>>>> some of the
>>>>>>>>>>>>>>> file size.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> hmmm ok. What version of gcc and binutils are you using ? btw
>>>>>>>>>>>>>> can you
>>>>>>>>>>>>>> run<cross>-gcc -v -xc /dev/null and post the output ?
>>>>>>>>>>>>>
>>>>>>>>>>>>> Khem,
>>>>>>>>>>>>>
>>>>>>>>>>>>> Either build that Chris has ran have not produced the final
>>>>>>>>>>>>> toolchain.
>>>>>>>>>>>>> Did you mean:<host>-gcc -v -xc /dev/null -v -xc /d
>>>>>>>>>>>>
>>>>>>>>>>>> no he should have an intermediate gcc already built before
>>>>>>>>>>>> building eglibc thats the one I was interested in.
>>>>>>>>>>>>
>>>>>>>>>>>>> ?
>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Regards,
>>>>>>>>>>>>>>> Chris
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> -----Original Message-----
>>>>>>>>>>>>>>> From: Khem Raj [mailto:raj.khem@gmail.com]
>>>>>>>>>>>>>>> Sent: Tuesday, January 18, 2011 11:44 PM
>>>>>>>>>>>>>>> To: Kerios, Chris (KSC-ASRC-466)[ASRC AEROSPACE CORP]
>>>>>>>>>>>>>>> Cc: crossgcc@sourceware.org
>>>>>>>>>>>>>>> Subject: Re: Update: Still with Build failure for PPC405
>>>>>>>>>>>>>>> using
>>>>>>>>>>>>>>> crosstool-ng-1.9.2
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> On (18/01/11 14:45), Kerios, Chris (KSC-ASRC-466)[ASRC
>>>>>>>>>>>>>>> AEROSPACE CORP] wrote:
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Hello again,
>>>>>>>>>>>>>>>> I think I have worked my way through enough builds, etc. to
>>>>>>>>>>>>>>>> form a coherent email regarding my cross tool build effort
>>>>>>>>>>>>>>>> and problem. ÄI
>>>>>>>>>>>>>>>> have attached two files of the Äbuild logs that show where
>>>>>>>>>>>>>>>> the builds are
>>>>>>>>>>>>>>>> breaking. I cannot send the whole log as my email system
>>>>>>>>>>>>>>>> won't pass it. ÄAs
>>>>>>>>>>>>>>>> I am not a gnu tools expert I can only pursue the most
>>>>>>>>>>>>>>>> elementary fixes of
>>>>>>>>>>>>>>>> which I can't decipher these. ÄI've looked through the
>>>>>>>>>>>>>>>> mailing list as well.
>>>>>>>>>>>>>>>> First the configuration:
>>>>>>>>>>>>>>>> Host build machine: x86, Fedora Core 14 with most recent
>>>>>>>>>>>>>>>> updates applied.
>>>>>>>>>>>>>>>> Target machine: MPL powerpc-405gp
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Per my email from last week I received a suggestion to back
>>>>>>>>>>>>>>>> port my make version from the Fedora 14 version of make 3.82
>>>>>>>>>>>>>>>> to make 3.81.
>>>>>>>>>>>>>>>> ÄI have done this and the build goes significantly further
>>>>>>>>>>>>>>>> than before. ÄThe
>>>>>>>>>>>>>>>> build is now breaking during "Installing C library". ÄIt
>>>>>>>>>>>>>>>> appears to be
>>>>>>>>>>>>>>>> looking for -lgcc and not finding it. ÄIn looking at the gcc
>>>>>>>>>>>>>>>> command above
>>>>>>>>>>>>>>>> it there is a section after the 4.3.2 which looks wrong as
>>>>>>>>>>>>>>>> it has a bunch of
>>>>>>>>>>>>>>>> ../../.. but I can't be sure and I don't know where all
>>>>>>>>>>>>>>>> these paths are
>>>>>>>>>>>>>>>> defined. ÄThe make 3.82 build breaks immediately at the
>>>>>>>>>>>>>>>> "Installing kernel
>>>>>>>>>>>>>>>> headers" phase.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> As another data point I have built crosstool successfully on
>>>>>>>>>>>>>>>> the 1.6.[0-2] versions. ÄStarting on versions 1.7 and beyond
>>>>>>>>>>>>>>>> these problems
>>>>>>>>>>>>>>>> appear. ÄI don't know if anyone has built for PPC 405 in a
>>>>>>>>>>>>>>>> while so this may
>>>>>>>>>>>>>>>> be why these problems cropped up and weren't identified.
>>>>>>>>>>>>>>>> ÄAnyway, any help
>>>>>>>>>>>>>>>> on this would be appreciated as I'm not all that keen on
>>>>>>>>>>>>>>>> running 1.6.2 if I
>>>>>>>>>>>>>>>> don't have to. ÄI would like to stay current.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> If you really do not need to stick to eglibc 2.9 then I would
>>>>>>>>>>>>>>> suggest to use 2.12 if possible.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Can you post all logs somewhere I could not infer what could
>>>>>>>>>>>>>>> be
>>>>>>>>>>>>>>> wrong from the Äattached logs
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> -Khem
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> -Bryan
>>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> OK the problem is reproducible with your config. What I see is
>>>>>>>>>>> that
>>>>>>>>>>> gcc-shared installs symlink to shared libgcc but does not install
>>>>>>>>>>> the
>>>>>>>>>>> shared libgcc itself
>>>>>>>>>>> into the temporary sysroot its using. I am still waiting on
>>>>>>>>>>> validating
>>>>>>>>>>> this (my system is really slow). I see that ct-ng called make
>>>>>>>>>>> install-libgcc I hope that should
>>>>>>>>>>> have done the job but it seems it did not.
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>> Khem,
>>>>>>>>>
>>>>>>>>> My build is much slower then your's. ugh... vmware fusion...
>>>>>>>>>
>>>>>>>>> Now that I have a fc14 install, I am going to see what I can do
>>>>>>>>> about
>>>>>>>>> these make 3.82 issues.
>>>>>>>>>
>>>>>>>>> -Bryan
>>>>>>>>
>>>>>>>> Oops sorry...understood.
>>>>>>>
>>>>>>> No problems.
>>>>>>>
>>>>>>> So I was also able to reproduce the build issue with make 3.81 on
>>>>>>> fc14.
>>>>>>> I then tried to build 4.3.5 to see if that release fixes this issue.
>>>>>>> It also broke in the same spot with the same error.
>>>>>>>
>>>>>>> Chris, would you have any problem moving to gcc-4.4? Or do you need
>>>>>>> 4.3.x for reason?
>>>>>>> I'm going to try building 4.4.5 tonight, and my hope is that it
>>>>>>> installs libgcc correctly.
>>>>>>>
>>>>>>> -Bryan
>>>>>>
>>>>>> I have no problems at all going to 4.4. Are you thinking its a gcc
>>>>>> issue?
>>>>>
>>>>> OK then please try with gcc 4.5.2 or 4.4.4
>>>>>
>>>>
>>>> I tried with gcc 4.5.2 and 4.4.4 both install libgcc_s.so.1 correclty
>>>> and the build passes this point of failure
>>>>
>>>> Good Morning,
>>>> I just tried building it with 4.4.4 and was unsuccessful. ÄIt's not
>>>> getting past the CLoog/ppl build. ÄJust a reminder, I am on x86 Fedora
>>>> 14
>>>> and had binutils 2.20.1 and eglibc 2.10 selected. ÄAlso, I am still
>>>> using
>>>> make 3.81 as it blows up right in the beginning on the kernel headers
>>>> steps.
>>>> ÄI have attached the build.log. ÄI am going to try a 4.5.1. build now.
>>>> ÄRaj,
>>>> what are you using for a host build environment?
>>>> Regards,
>>>> Chris
>>>>
>>>
>>> Here is a modified version of your .config that built a 4.5.2 based
>>> toolchain successfully
>>> on ubuntu 10.04/x86
>>>
>>> -Khem
>>>
>>>
>>>
>>> Sorry Khem, but the build does not work on Fedora 14 with your config
>>> file.
>>> ÂThere must be some difference(s) that are causing these problems we are
>>> seeing. ÂDebian vs. Fedora. Âeglibc based system vs. glibc based
>>> system???
>>> ÂI have attached the build.log. ÂIt dies early when it begins the CLooG
>>> build.
>>>
>>> Bryan: Have you had any luck with your Fedora system?
>>>
>>> Regards,
>>> Chris
>>>
>>> Attachment: .config
>>> Description: Binary data
>>>
>>
>> I downgraded cloog-ppl to 0.15.9 and am using gcc-4.4.5, and now I get
>> a problem while building the static core gcc where it can't find
>> -lstdc++. I think this is a problem with either cloog-ppl or binutils.
>> Not sure yet.
>> *grumble*
>>
>> It sounds like this architecture/distribution combination needs some love.
>>
>> Attached is my current config:
>
> I was just reading the archive and noticed there is a patch for the
> CLooG/ppl problem that I am encountering. I've applied the patch and have
> started another build. ÂDisregard my previous email on that problem. I will
> let everyone know how this next build goes.

Ah, I made a mistake then. I thought that patch was in 1.9.2. (From my
conversation in another thread with Yann.)
I will try that as well.

> I didn't realize the static libstdc++ is needed. ÂI am downloading and
> installing now.

Right, the static libstdc++ is part of the libstdc++6 dev package on
debian. We should document this.

-Bryan

--
For unsubscribe information see http://sourceware.org/lists.html#faq