This is the mail archive of the crossgcc@sourceware.org mailing list for the crossgcc project.
See the CrossGCC FAQ for lots more information.
Index Nav: | [Date Index] [Subject Index] [Author Index] [Thread Index] | |
---|---|---|
Message Nav: | [Date Prev] [Date Next] | [Thread Prev] [Thread Next] |
Other format: | [Raw text] |
Hallo Yann, thanks for applying my default config. Due to your changes in revision 764 and later the default config won't build anymore. E.g. 'ct-ng menuconfig' fills in "alpha" in CT_ARCH... Here is the patch against r771. I have some more patches for mips, I will send separately tomorrow. best regards, Alexander Signed-Off: Alexander Bigga <linux@bigga.de> Index: samples/arm-unknown-linux-gnueabi/crosstool.config =================================================================== --- samples/arm-unknown-linux-gnueabi/crosstool.config (Revision 771) +++ samples/arm-unknown-linux-gnueabi/crosstool.config (Arbeitskopie) @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# crosstool-NG version: 1.1.0+svn_trunk@760 -# Thu Jun 26 09:43:56 2008 +# crosstool-NG version: 1.1.0+svn_trunk@770M +# Mon Jun 30 23:16:18 2008 # # @@ -73,41 +73,42 @@ # # Target options # - -# -# General target options -# CT_ARCH="arm" -# CT_ARCH_ALPHA is not set -CT_ARCH_ARM=y -# CT_ARCH_IA64 is not set -# CT_ARCH_MIPS is not set -# CT_ARCH_PPC is not set -# CT_ARCH_SH is not set -# CT_ARCH_x86 is not set -# CT_ARCH_x86_64 is not set +CT_ARCH_SUPPORT_ARCH=y +CT_ARCH_SUPPORT_ABI=y +CT_ARCH_SUPPORT_CPU=y +CT_ARCH_SUPPORT_TUNE=y +CT_ARCH_SUPPORT_FPU=y CT_ARCH_SUPPORTS_BOTH_ENDIAN=y # CT_ARCH_DEFAULT_BE is not set CT_ARCH_DEFAULT_LE=y +CT_ARCH_ARCH="armv5te" +CT_ARCH_ABI="aapcs" +CT_ARCH_CPU="arm926ej-s" +CT_ARCH_TUNE="" +CT_ARCH_FPU="" # CT_ARCH_BE is not set CT_ARCH_LE=y -CT_ARCH_CPU="arm926ej-s" -CT_ARCH_TUNE="" +# CT_ARCH_FLOAT_HW is not set +CT_ARCH_FLOAT_SW=y +CT_TARGET_CFLAGS="" # -# ARM specific options +# General target options # +# CT_ARCH_alpha is not set +CT_ARCH_arm=y CT_ARCH_ARM_EABI=y -CT_ARCH_ABI="" +# CT_ARCH_ia64 is not set +# CT_ARCH_mips is not set +# CT_ARCH_powerpc is not set +# CT_ARCH_sh is not set +# CT_ARCH_x86 is not set +# CT_ARCH_x86_64 is not set # # Target optimisations # -CT_ARCH_ARCH="armv5te" -CT_ARCH_FPU="" -# CT_ARCH_FLOAT_HW is not set -CT_ARCH_FLOAT_SW=y -CT_TARGET_CFLAGS="" # # Toolchain options On Tue, Jun 24, 2008 at 18:28:34 +0200, you wrote: > Alexander & all, > > On Saturday 21 June 2008 00:06:15 Alexander Bigga - Software wrote: > > I'm really happy to see somebody working on this painful crosstool scripts. > > Thanks! :-) > > > With very little work I was able to build a similar toolchain with the ct-ng > > scripts. Attached is a sample config for arm-unknow-linux-gnueabi > > supporting: > > - kernel 2.6.25.1 > > - binutils 2.18.50.0.7 > > - gcc 4.2.3 > > - glibc 2.7 > > - NPTL > > - soft float > > - CPU arm926ej-s > > OK, added both to samples dir, and to status table. Thanks! > > > Best regards and lots of supporter and user! > > :-) > > Regards, > Yann E. MORIN. -- Alexander Bigga * linux@bigga.de * www.bigga.de -- For unsubscribe information see http://sourceware.org/lists.html#faq
Index Nav: | [Date Index] [Subject Index] [Author Index] [Thread Index] | |
---|---|---|
Message Nav: | [Date Prev] [Date Next] | [Thread Prev] [Thread Next] |