Re: crosstool-ng for ep9307 / arm920t

[Matthias Kaehlcke <matthias at kaehlcke dot net>]

El Thu, Apr 24, 2008 at 01:07:10PM +0200 Matthias Kaehlcke ha dit:
 
> i'm trying to build a crosstool-ng toolchain for a ep9307 / arm920t
> target. i succeed to build the toolchain, a linux kernel compiled with
> it boots, but hangs when starting init. in order to reduce complexity
> i replaced the dynamically linked busybox by a statically linked
> 'hello world' program. i tried several combinations, with and without
> EABI, different gcc/glibc versions, ... but always with the same
> result.
> 
> the host system is Ubuntu Gutsy Gibbon, the used crosstool-ng version
> is v1.0.0. the crosstool-ng configuration file is attached to this
> mail.
> 
> do you see something obviously wrong in the configuration or could you
> provide me a configuration file that is known to work on the mentioned
> target?

i finally found a working combination, the .config file is
attached. the kernel boots and starts busybox on the ep93xx board
as well as on my kb9202b.

thanks!

-- 
Matthias Kaehlcke
Embedded Linux Engineer
Barcelona

            Nothing is more despicable than respect based on fear
                              (Albert Camus)
                                                                 .''`.
    using free software / Debian GNU/Linux | http://debian.org  : :'  :
                                                                `. `'`
gpg --keyserver pgp.mit.edu --recv-keys 47D8E5D4                  `-

Attachment: .config
Description: Text document

--
For unsubscribe information see http://sourceware.org/lists.html#faq