This is the mail archive of the crossgcc@sourceware.org mailing list for the crossgcc project.
See the CrossGCC FAQ for lots more information.
Index Nav: | [Date Index] [Subject Index] [Author Index] [Thread Index] | |
---|---|---|
Message Nav: | [Date Prev] [Date Next] | [Thread Prev] [Thread Next] |
Other format: | [Raw text] |
On Sun, 2007-12-16 at 17:43 +0900, Hiroshi Homma wrote: > Hi, all. > i am japnese. sorry for my bad English. Your English is fine (much better than my Japanese :-)> The only problem I see below is that you don't have "makeinfo" installed on your build machine. This means that the documentation won't be built. The rest of the build should be OK. Jim. > make[3]: Entering directory > `/home/h-hiroshi/build/arm-elf/ARM7TDMI/newlib/etc' > /C/msys/1.0/home/h-hiroshi/newlib-1.15.0/missing > makeinfo --split-size=5000000 --split-size=5000000 --no-split > -I/C/msys/1.0/home/h-hiroshi/newlib-1.15.0/etc > -o standards.info > /C/msys/1.0/home/h-hiroshi/newlib-1.15.0/etc/standards.texi > WARNING: `makeinfo' is missing on your system. You should only need > it if > you modified a `.texi' or `.texinfo' file, or any other file > indirectly affecting the aspect of the manual. The spurious > call might also be the consequence of using a buggy > `make' (AIX, > DU, IRIX). You might want to install the `Texinfo' package > or > the `GNU make' package. Grab either from any GNU archive > site. -- James Lemke <jim@lemke.org> -- For unsubscribe information see http://sourceware.org/lists.html#faq
Index Nav: | [Date Index] [Subject Index] [Author Index] [Thread Index] | |
---|---|---|
Message Nav: | [Date Prev] [Date Next] | [Thread Prev] [Thread Next] |