RE: GCC and Freescale MPC83xx / e300 core support

[Steve Papacharalambous <stevep at freescale dot com>]

Hi Tal,

The toolchain that I referred to was built using crosstool.  The source
rpm contains the build instructions and data definitions that were used
to build the toolchain using crosstool, so you can derive .dat and demo
files from the source rpm if necessary.

I have a pre-built e300c2 toolchain for Cygwin hosts, if you're
interested let me know, and I'll upload it to the bitshrine site,

Best regards,

Steve

On Tue, 2006-11-07 at 13:59 +0200, Tal Hasid wrote:
> Hi,
> 
> I'm working on Windows based machine using Cygwin, so I have to use
> crosstool in order generate the toolchain from scratch.
> Does someone have some example of demo-ppce300c2.sh and
> powerpc-e300c2.dat files for generating the MPC83xx toolchain.
> 
> Best regards,
> Tal
> 
> -----Original Message-----
> From: Steve Papacharalambous [mailto:stevep@freescale.com] 
> Sent: Tuesday, November 07, 2006 11:54 AM
> To: Tal Hasid
> Cc: crossgcc@sourceware.org
> Subject: Re: GCC and Freescale MPC83xx / e300 core support
> 
> 
> Hi Tal,
> 
> There is a soft float e300 toolchain available from:
> http://www.bitshrine.org/gpp/
> 
> The binary rpm is: tc-fsl-x86lnx-e300c2-nptl-4.0.2-2.i386.rpm
> 
> The source rpm also available from this location,
> 
> Best regards,
> 
> Steve
> 
> On Mon, 2006-11-06 at 16:48 +0200, Tal Hasid wrote:
> > Hi,
> >  
> > I have to build a cross toolchain for the MPC832x which is based on 
> > the e300 core. Which version of gcc support the e300 core and what is 
> > the correct cpu type for that (i.e. --with-cpu=) ?
> > 
> > I know that the e300 core is compatible with the 603e core besides the
> 
> > hardware floating point unit. Does it mean that I can build the cross 
> > toolchain for the 603e with software floating point support and it 
> > will be fine for this cpu (MPC83xx).
> > 
> > Any help is appreciated.
> > 
> > Thanks in advance,
> > Tal
> > **********************************************************************
> > ************************
> > IMPORTANT: The contents of this email and any attachments are
> confidential. They are intended for the 
> > named recipient(s) only.
> > If you have received this email in error, please notify the system
> manager or the sender immediately and do 
> > not disclose the contents to anyone or make copies thereof.
> > *** eSafe scanned this email for viruses, vandals, and malicious
> content. ***
> >
> ************************************************************************
> **********************
> > 
> > 
> > --
> > For unsubscribe information see http://sourceware.org/lists.html#faq
> > 
> > 
> **********************************************************************************************
> IMPORTANT: The contents of this email and any attachments are confidential. They are intended for the 
> named recipient(s) only.
> If you have received this email in error, please notify the system manager or the sender immediately and do 
> not disclose the contents to anyone or make copies thereof.
> *** eSafe scanned this email for viruses, vandals, and malicious content. ***
> **********************************************************************************************
> 
> 
> --
> For unsubscribe information see http://sourceware.org/lists.html#faq
> 
> 


--
For unsubscribe information see http://sourceware.org/lists.html#faq