This is the mail archive of the crossgcc@sources.redhat.com mailing list for the crossgcc project.
See the CrossGCC FAQ for lots more information.
Index Nav: | [Date Index] [Subject Index] [Author Index] [Thread Index] | |
---|---|---|
Message Nav: | [Date Prev] [Date Next] | [Thread Prev] [Thread Next] |
Other format: | [Raw text] |
Hi Dan; This is my script to build gdb: ************************************************************** #!/bin/bash export PATH="/tuba_local/crosstool/crosstool-0.24/result/arm-arm9-linux-gnu/gcc-3.2.1-glibc-2.3.2/bin:/sbin:/usr/sbin:/usr/bin:/bin" # This builds an arm9 cross gdb... # ../gdb-6.0/configure --target=arm-arm9-linux-gnu # This builds a native arm9 gdb using i686-unknown-linux-gnu to build it... # ../gdb-6.0/configure --host=arm-arm9-linux-gnu --build=i686-unknown-linux-gnu --target=arm-arm9-linux-gnu # only use arm9 tools? ../gdb-6.0/configure --host=arm-arm9-linux-gnu --build=arm-arm9-linux-gnu --target=arm-arm9-linux-gnu ************************************************************** This is the output of the ls: ************************************************************** tuba:/tuba_local/gdb_6.0/build_arm9_gdb_6.0_try3> ls /tuba_local/crosstool/crosstool-0.24/result/arm-arm9-linux-gnu/gcc-3.2.1-glibc-2.3.2/bin arm-arm9-linux-gnu-addr2line arm-arm9-linux-gnu-c++filt arm-arm9-linux-gnu-gccbug arm-arm9-linux-gnu-objcopy arm-arm9-linux-gnu-size arm-arm9-linux-gnu-ar arm-arm9-linux-gnu-cpp arm-arm9-linux-gnu-gcov arm-arm9-linux-gnu-objdump arm-arm9-linux-gnu-strings arm-arm9-linux-gnu-as arm-arm9-linux-gnu-g++ arm-arm9-linux-gnu-ld arm-arm9-linux-gnu-ranlib arm-arm9-linux-gnu-strip arm-arm9-linux-gnu-c++ arm-arm9-linux-gnu-gcc arm-arm9-linux-gnu-nm arm-arm9-linux-gnu-readelf tuba:/tuba_local/gdb_6.0/build_arm9_gdb_6.0_try3> ************************************************************** Thanks, Ken On Monday 27 October 2003 15:15, Dan Kegel wrote: > Wolcott, Ken (MED, Compuware) wrote: > > ../gdb-6.0/configure \ > > --host=arm-arm9-linux-gnu \ > > --build=i686-unknown-linux-gnu \ > > --target=arm-arm9-linux-gnu > > > > because I want a native arm9 gdb they can run on the board itself. > > > > This failed due to: > > > > ************************************************************************* > >********************** arm-arm9-linux-gnu-ar rc libiberty.a \ > > regex.o cplus-dem.o cp-demangle.o md5.o alloca.o argv.o choose-temp.o > > concat.o dyn-string.o fdmatch.o fibheap.o floatformat.o fnmatch.o > > getopt.o getopt1.o getpwd.o getruntime.o hashtab.o hex.o lbasename.o > > lrealpath.o make-relative-prefix.o make-temp-file.o objalloc.o obstack.o > > partition.o physmem.o pex-unix.o safe-ctype.o sort.o spaces.o > > splay-tree.o strerror.o strsignal.o ternary.o xatexit.o xexit.o xmalloc.o > > xmemdup.o xstrdup.o xstrerror.o mkstemps.o > > make[1]: arm-arm9-linux-gnu-ar: Command not found > > make[1]: *** [libiberty.a] Error 127 > > make[1]: Leaving directory > > `/tuba_local/gdb_6.0/build_arm9_gdb_6.0_try2/libiberty' > > make: *** [all-libiberty] Error 2 > > ************************************************************************* > >********************** > > > > I don't have an arm-arm9-linux-gnu-ar executeable as a result of running > > crosstool :-( > > What *do* you have as a result of running crosstool? > Can you do an 'ls' in the bin directory of the toolchain? > Sounds like maybe you just have a path set wrong... > > In other words, don't panic, your toolchain is probably fine... > - Dan -- Kenneth A. Wolcott Consultant, Clinical Systems Engineering GE Medical Systems Information Technologies 8200 West Tower Avenue, Milwaukee, WI 53223 Phone: 414/362-2720 Email: Ken.Wolcott@med.ge.com ------ Want more information? See the CrossGCC FAQ, http://www.objsw.com/CrossGCC/ Want to unsubscribe? Send a note to crossgcc-unsubscribe@sources.redhat.com
Index Nav: | [Date Index] [Subject Index] [Author Index] [Thread Index] | |
---|---|---|
Message Nav: | [Date Prev] [Date Next] | [Thread Prev] [Thread Next] |