This is the mail archive of the crossgcc@sources.redhat.com mailing list for the crossgcc project.
See the CrossGCC FAQ for lots more information.
Index Nav: | [Date Index] [Subject Index] [Author Index] [Thread Index] | |
---|---|---|
Message Nav: | [Date Prev] [Date Next] | [Thread Prev] [Thread Next] |
Albe: > I set the baudrate as described in the stub, > I also set the serial debug to 1, The stub will answer with a "+" (that > should be an acknowledg) an the a $ sign followed by two \0x00 bytes and a # > followed by a \0x00, so that I think The baudrate is OK. > When I compiled the gdbstub, I found that the S-record file was containig > some stuff out of the flash addresses may I did something wrong? Can you post a logfile? It sounds like the stub is sending back an incorrect response to the "$?#xx" packet... As to the addresses in the S-record file being in the wrong places, it's because there's some initdata in the stub code that I haven't cleaned up yet. You can ignore the problem. b.g. -- Bill Gatliff bgat@billgatliff.com ------ Want more information? See the CrossGCC FAQ, http://www.objsw.com/CrossGCC/ Want to unsubscribe? Send a note to crossgcc-unsubscribe@sourceware.cygnus.com
Index Nav: | [Date Index] [Subject Index] [Author Index] [Thread Index] | |
---|---|---|
Message Nav: | [Date Prev] [Date Next] | [Thread Prev] [Thread Next] |