This is the mail archive of the
binutils@sourceware.org
mailing list for the binutils project.
[PATCH] gold: Use autotools pthread macro
- From: Joshua Watt <jpewhacker at gmail dot com>
- To: binutils at sourceware dot org
- Cc: Joshua Watt <JPEWhacker at gmail dot com>
- Date: Thu, 15 Feb 2018 21:35:31 -0600
- Subject: [PATCH] gold: Use autotools pthread macro
- Authentication-results: sourceware.org; auth=none
The autotools library macro (AX_PTHREAD) is now used to detect if
pthreads is present and multi-threaded linking in gold is automatically
enabled if it is found. This enables multi-threaded gold on platforms
where pthreads is enabled via other methods than just -lpthread (e.g.
MinGW)
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
---
config/ax_pthread.m4 | 485 ++++++++++++++++++++++++++++
gold/Makefile.am | 11 +-
gold/Makefile.in | 22 +-
gold/aclocal.m4 | 1 +
gold/configure | 767 +++++++++++++++++++++++++++++++++++++++++++--
gold/configure.ac | 23 +-
gold/testsuite/Makefile.in | 8 +-
7 files changed, 1254 insertions(+), 63 deletions(-)
create mode 100644 config/ax_pthread.m4
diff --git a/config/ax_pthread.m4 b/config/ax_pthread.m4
new file mode 100644
index 0000000000..5fbf9fe0d6
--- /dev/null
+++ b/config/ax_pthread.m4
@@ -0,0 +1,485 @@
+# ===========================================================================
+# https://www.gnu.org/software/autoconf-archive/ax_pthread.html
+# ===========================================================================
+#
+# SYNOPSIS
+#
+# AX_PTHREAD([ACTION-IF-FOUND[, ACTION-IF-NOT-FOUND]])
+#
+# DESCRIPTION
+#
+# This macro figures out how to build C programs using POSIX threads. It
+# sets the PTHREAD_LIBS output variable to the threads library and linker
+# flags, and the PTHREAD_CFLAGS output variable to any special C compiler
+# flags that are needed. (The user can also force certain compiler
+# flags/libs to be tested by setting these environment variables.)
+#
+# Also sets PTHREAD_CC to any special C compiler that is needed for
+# multi-threaded programs (defaults to the value of CC otherwise). (This
+# is necessary on AIX to use the special cc_r compiler alias.)
+#
+# NOTE: You are assumed to not only compile your program with these flags,
+# but also to link with them as well. For example, you might link with
+# $PTHREAD_CC $CFLAGS $PTHREAD_CFLAGS $LDFLAGS ... $PTHREAD_LIBS $LIBS
+#
+# If you are only building threaded programs, you may wish to use these
+# variables in your default LIBS, CFLAGS, and CC:
+#
+# LIBS="$PTHREAD_LIBS $LIBS"
+# CFLAGS="$CFLAGS $PTHREAD_CFLAGS"
+# CC="$PTHREAD_CC"
+#
+# In addition, if the PTHREAD_CREATE_JOINABLE thread-attribute constant
+# has a nonstandard name, this macro defines PTHREAD_CREATE_JOINABLE to
+# that name (e.g. PTHREAD_CREATE_UNDETACHED on AIX).
+#
+# Also HAVE_PTHREAD_PRIO_INHERIT is defined if pthread is found and the
+# PTHREAD_PRIO_INHERIT symbol is defined when compiling with
+# PTHREAD_CFLAGS.
+#
+# ACTION-IF-FOUND is a list of shell commands to run if a threads library
+# is found, and ACTION-IF-NOT-FOUND is a list of commands to run it if it
+# is not found. If ACTION-IF-FOUND is not specified, the default action
+# will define HAVE_PTHREAD.
+#
+# Please let the authors know if this macro fails on any platform, or if
+# you have any other suggestions or comments. This macro was based on work
+# by SGJ on autoconf scripts for FFTW (http://www.fftw.org/) (with help
+# from M. Frigo), as well as ac_pthread and hb_pthread macros posted by
+# Alejandro Forero Cuervo to the autoconf macro repository. We are also
+# grateful for the helpful feedback of numerous users.
+#
+# Updated for Autoconf 2.68 by Daniel Richard G.
+#
+# LICENSE
+#
+# Copyright (c) 2008 Steven G. Johnson <stevenj@alum.mit.edu>
+# Copyright (c) 2011 Daniel Richard G. <skunk@iSKUNK.ORG>
+#
+# This program is free software: you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the
+# Free Software Foundation, either version 3 of the License, or (at your
+# option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
+# Public License for more details.
+#
+# You should have received a copy of the GNU General Public License along
+# with this program. If not, see <https://www.gnu.org/licenses/>.
+#
+# As a special exception, the respective Autoconf Macro's copyright owner
+# gives unlimited permission to copy, distribute and modify the configure
+# scripts that are the output of Autoconf when processing the Macro. You
+# need not follow the terms of the GNU General Public License when using
+# or distributing such scripts, even though portions of the text of the
+# Macro appear in them. The GNU General Public License (GPL) does govern
+# all other use of the material that constitutes the Autoconf Macro.
+#
+# This special exception to the GPL applies to versions of the Autoconf
+# Macro released by the Autoconf Archive. When you make and distribute a
+# modified version of the Autoconf Macro, you may extend this special
+# exception to the GPL to apply to your modified version as well.
+
+#serial 24
+
+AU_ALIAS([ACX_PTHREAD], [AX_PTHREAD])
+AC_DEFUN([AX_PTHREAD], [
+AC_REQUIRE([AC_CANONICAL_HOST])
+AC_REQUIRE([AC_PROG_CC])
+AC_REQUIRE([AC_PROG_SED])
+AC_LANG_PUSH([C])
+ax_pthread_ok=no
+
+# We used to check for pthread.h first, but this fails if pthread.h
+# requires special compiler flags (e.g. on Tru64 or Sequent).
+# It gets checked for in the link test anyway.
+
+# First of all, check if the user has set any of the PTHREAD_LIBS,
+# etcetera environment variables, and if threads linking works using
+# them:
+if test "x$PTHREAD_CFLAGS$PTHREAD_LIBS" != "x"; then
+ ax_pthread_save_CC="$CC"
+ ax_pthread_save_CFLAGS="$CFLAGS"
+ ax_pthread_save_LIBS="$LIBS"
+ AS_IF([test "x$PTHREAD_CC" != "x"], [CC="$PTHREAD_CC"])
+ CFLAGS="$CFLAGS $PTHREAD_CFLAGS"
+ LIBS="$PTHREAD_LIBS $LIBS"
+ AC_MSG_CHECKING([for pthread_join using $CC $PTHREAD_CFLAGS $PTHREAD_LIBS])
+ AC_LINK_IFELSE([AC_LANG_CALL([], [pthread_join])], [ax_pthread_ok=yes])
+ AC_MSG_RESULT([$ax_pthread_ok])
+ if test "x$ax_pthread_ok" = "xno"; then
+ PTHREAD_LIBS=""
+ PTHREAD_CFLAGS=""
+ fi
+ CC="$ax_pthread_save_CC"
+ CFLAGS="$ax_pthread_save_CFLAGS"
+ LIBS="$ax_pthread_save_LIBS"
+fi
+
+# We must check for the threads library under a number of different
+# names; the ordering is very important because some systems
+# (e.g. DEC) have both -lpthread and -lpthreads, where one of the
+# libraries is broken (non-POSIX).
+
+# Create a list of thread flags to try. Items starting with a "-" are
+# C compiler flags, and other items are library names, except for "none"
+# which indicates that we try without any flags at all, and "pthread-config"
+# which is a program returning the flags for the Pth emulation library.
+
+ax_pthread_flags="pthreads none -Kthread -pthread -pthreads -mthreads pthread --thread-safe -mt pthread-config"
+
+# The ordering *is* (sometimes) important. Some notes on the
+# individual items follow:
+
+# pthreads: AIX (must check this before -lpthread)
+# none: in case threads are in libc; should be tried before -Kthread and
+# other compiler flags to prevent continual compiler warnings
+# -Kthread: Sequent (threads in libc, but -Kthread needed for pthread.h)
+# -pthread: Linux/gcc (kernel threads), BSD/gcc (userland threads), Tru64
+# (Note: HP C rejects this with "bad form for `-t' option")
+# -pthreads: Solaris/gcc (Note: HP C also rejects)
+# -mt: Sun Workshop C (may only link SunOS threads [-lthread], but it
+# doesn't hurt to check since this sometimes defines pthreads and
+# -D_REENTRANT too), HP C (must be checked before -lpthread, which
+# is present but should not be used directly; and before -mthreads,
+# because the compiler interprets this as "-mt" + "-hreads")
+# -mthreads: Mingw32/gcc, Lynx/gcc
+# pthread: Linux, etcetera
+# --thread-safe: KAI C++
+# pthread-config: use pthread-config program (for GNU Pth library)
+
+case $host_os in
+
+ freebsd*)
+
+ # -kthread: FreeBSD kernel threads (preferred to -pthread since SMP-able)
+ # lthread: LinuxThreads port on FreeBSD (also preferred to -pthread)
+
+ ax_pthread_flags="-kthread lthread $ax_pthread_flags"
+ ;;
+
+ hpux*)
+
+ # From the cc(1) man page: "[-mt] Sets various -D flags to enable
+ # multi-threading and also sets -lpthread."
+
+ ax_pthread_flags="-mt -pthread pthread $ax_pthread_flags"
+ ;;
+
+ openedition*)
+
+ # IBM z/OS requires a feature-test macro to be defined in order to
+ # enable POSIX threads at all, so give the user a hint if this is
+ # not set. (We don't define these ourselves, as they can affect
+ # other portions of the system API in unpredictable ways.)
+
+ AC_EGREP_CPP([AX_PTHREAD_ZOS_MISSING],
+ [
+# if !defined(_OPEN_THREADS) && !defined(_UNIX03_THREADS)
+ AX_PTHREAD_ZOS_MISSING
+# endif
+ ],
+ [AC_MSG_WARN([IBM z/OS requires -D_OPEN_THREADS or -D_UNIX03_THREADS to enable pthreads support.])])
+ ;;
+
+ solaris*)
+
+ # On Solaris (at least, for some versions), libc contains stubbed
+ # (non-functional) versions of the pthreads routines, so link-based
+ # tests will erroneously succeed. (N.B.: The stubs are missing
+ # pthread_cleanup_push, or rather a function called by this macro,
+ # so we could check for that, but who knows whether they'll stub
+ # that too in a future libc.) So we'll check first for the
+ # standard Solaris way of linking pthreads (-mt -lpthread).
+
+ ax_pthread_flags="-mt,pthread pthread $ax_pthread_flags"
+ ;;
+esac
+
+# GCC generally uses -pthread, or -pthreads on some platforms (e.g. SPARC)
+
+AS_IF([test "x$GCC" = "xyes"],
+ [ax_pthread_flags="-pthread -pthreads $ax_pthread_flags"])
+
+# The presence of a feature test macro requesting re-entrant function
+# definitions is, on some systems, a strong hint that pthreads support is
+# correctly enabled
+
+case $host_os in
+ darwin* | hpux* | linux* | osf* | solaris*)
+ ax_pthread_check_macro="_REENTRANT"
+ ;;
+
+ aix*)
+ ax_pthread_check_macro="_THREAD_SAFE"
+ ;;
+
+ *)
+ ax_pthread_check_macro="--"
+ ;;
+esac
+AS_IF([test "x$ax_pthread_check_macro" = "x--"],
+ [ax_pthread_check_cond=0],
+ [ax_pthread_check_cond="!defined($ax_pthread_check_macro)"])
+
+# Are we compiling with Clang?
+
+AC_CACHE_CHECK([whether $CC is Clang],
+ [ax_cv_PTHREAD_CLANG],
+ [ax_cv_PTHREAD_CLANG=no
+ # Note that Autoconf sets GCC=yes for Clang as well as GCC
+ if test "x$GCC" = "xyes"; then
+ AC_EGREP_CPP([AX_PTHREAD_CC_IS_CLANG],
+ [/* Note: Clang 2.7 lacks __clang_[a-z]+__ */
+# if defined(__clang__) && defined(__llvm__)
+ AX_PTHREAD_CC_IS_CLANG
+# endif
+ ],
+ [ax_cv_PTHREAD_CLANG=yes])
+ fi
+ ])
+ax_pthread_clang="$ax_cv_PTHREAD_CLANG"
+
+ax_pthread_clang_warning=no
+
+# Clang needs special handling, because older versions handle the -pthread
+# option in a rather... idiosyncratic way
+
+if test "x$ax_pthread_clang" = "xyes"; then
+
+ # Clang takes -pthread; it has never supported any other flag
+
+ # (Note 1: This will need to be revisited if a system that Clang
+ # supports has POSIX threads in a separate library. This tends not
+ # to be the way of modern systems, but it's conceivable.)
+
+ # (Note 2: On some systems, notably Darwin, -pthread is not needed
+ # to get POSIX threads support; the API is always present and
+ # active. We could reasonably leave PTHREAD_CFLAGS empty. But
+ # -pthread does define _REENTRANT, and while the Darwin headers
+ # ignore this macro, third-party headers might not.)
+
+ PTHREAD_CFLAGS="-pthread"
+ PTHREAD_LIBS=
+
+ ax_pthread_ok=yes
+
+ # However, older versions of Clang make a point of warning the user
+ # that, in an invocation where only linking and no compilation is
+ # taking place, the -pthread option has no effect ("argument unused
+ # during compilation"). They expect -pthread to be passed in only
+ # when source code is being compiled.
+ #
+ # Problem is, this is at odds with the way Automake and most other
+ # C build frameworks function, which is that the same flags used in
+ # compilation (CFLAGS) are also used in linking. Many systems
+ # supported by AX_PTHREAD require exactly this for POSIX threads
+ # support, and in fact it is often not straightforward to specify a
+ # flag that is used only in the compilation phase and not in
+ # linking. Such a scenario is extremely rare in practice.
+ #
+ # Even though use of the -pthread flag in linking would only print
+ # a warning, this can be a nuisance for well-run software projects
+ # that build with -Werror. So if the active version of Clang has
+ # this misfeature, we search for an option to squash it.
+
+ AC_CACHE_CHECK([whether Clang needs flag to prevent "argument unused" warning when linking with -pthread],
+ [ax_cv_PTHREAD_CLANG_NO_WARN_FLAG],
+ [ax_cv_PTHREAD_CLANG_NO_WARN_FLAG=unknown
+ # Create an alternate version of $ac_link that compiles and
+ # links in two steps (.c -> .o, .o -> exe) instead of one
+ # (.c -> exe), because the warning occurs only in the second
+ # step
+ ax_pthread_save_ac_link="$ac_link"
+ ax_pthread_sed='s/conftest\.\$ac_ext/conftest.$ac_objext/g'
+ ax_pthread_link_step=`$as_echo "$ac_link" | sed "$ax_pthread_sed"`
+ ax_pthread_2step_ac_link="($ac_compile) && (echo ==== >&5) && ($ax_pthread_link_step)"
+ ax_pthread_save_CFLAGS="$CFLAGS"
+ for ax_pthread_try in '' -Qunused-arguments -Wno-unused-command-line-argument unknown; do
+ AS_IF([test "x$ax_pthread_try" = "xunknown"], [break])
+ CFLAGS="-Werror -Wunknown-warning-option $ax_pthread_try -pthread $ax_pthread_save_CFLAGS"
+ ac_link="$ax_pthread_save_ac_link"
+ AC_LINK_IFELSE([AC_LANG_SOURCE([[int main(void){return 0;}]])],
+ [ac_link="$ax_pthread_2step_ac_link"
+ AC_LINK_IFELSE([AC_LANG_SOURCE([[int main(void){return 0;}]])],
+ [break])
+ ])
+ done
+ ac_link="$ax_pthread_save_ac_link"
+ CFLAGS="$ax_pthread_save_CFLAGS"
+ AS_IF([test "x$ax_pthread_try" = "x"], [ax_pthread_try=no])
+ ax_cv_PTHREAD_CLANG_NO_WARN_FLAG="$ax_pthread_try"
+ ])
+
+ case "$ax_cv_PTHREAD_CLANG_NO_WARN_FLAG" in
+ no | unknown) ;;
+ *) PTHREAD_CFLAGS="$ax_cv_PTHREAD_CLANG_NO_WARN_FLAG $PTHREAD_CFLAGS" ;;
+ esac
+
+fi # $ax_pthread_clang = yes
+
+if test "x$ax_pthread_ok" = "xno"; then
+for ax_pthread_try_flag in $ax_pthread_flags; do
+
+ case $ax_pthread_try_flag in
+ none)
+ AC_MSG_CHECKING([whether pthreads work without any flags])
+ ;;
+
+ -mt,pthread)
+ AC_MSG_CHECKING([whether pthreads work with -mt -lpthread])
+ PTHREAD_CFLAGS="-mt"
+ PTHREAD_LIBS="-lpthread"
+ ;;
+
+ -*)
+ AC_MSG_CHECKING([whether pthreads work with $ax_pthread_try_flag])
+ PTHREAD_CFLAGS="$ax_pthread_try_flag"
+ ;;
+
+ pthread-config)
+ AC_CHECK_PROG([ax_pthread_config], [pthread-config], [yes], [no])
+ AS_IF([test "x$ax_pthread_config" = "xno"], [continue])
+ PTHREAD_CFLAGS="`pthread-config --cflags`"
+ PTHREAD_LIBS="`pthread-config --ldflags` `pthread-config --libs`"
+ ;;
+
+ *)
+ AC_MSG_CHECKING([for the pthreads library -l$ax_pthread_try_flag])
+ PTHREAD_LIBS="-l$ax_pthread_try_flag"
+ ;;
+ esac
+
+ ax_pthread_save_CFLAGS="$CFLAGS"
+ ax_pthread_save_LIBS="$LIBS"
+ CFLAGS="$CFLAGS $PTHREAD_CFLAGS"
+ LIBS="$PTHREAD_LIBS $LIBS"
+
+ # Check for various functions. We must include pthread.h,
+ # since some functions may be macros. (On the Sequent, we
+ # need a special flag -Kthread to make this header compile.)
+ # We check for pthread_join because it is in -lpthread on IRIX
+ # while pthread_create is in libc. We check for pthread_attr_init
+ # due to DEC craziness with -lpthreads. We check for
+ # pthread_cleanup_push because it is one of the few pthread
+ # functions on Solaris that doesn't have a non-functional libc stub.
+ # We try pthread_create on general principles.
+
+ AC_LINK_IFELSE([AC_LANG_PROGRAM([#include <pthread.h>
+# if $ax_pthread_check_cond
+# error "$ax_pthread_check_macro must be defined"
+# endif
+ static void routine(void *a) { a = 0; }
+ static void *start_routine(void *a) { return a; }],
+ [pthread_t th; pthread_attr_t attr;
+ pthread_create(&th, 0, start_routine, 0);
+ pthread_join(th, 0);
+ pthread_attr_init(&attr);
+ pthread_cleanup_push(routine, 0);
+ pthread_cleanup_pop(0) /* ; */])],
+ [ax_pthread_ok=yes],
+ [])
+
+ CFLAGS="$ax_pthread_save_CFLAGS"
+ LIBS="$ax_pthread_save_LIBS"
+
+ AC_MSG_RESULT([$ax_pthread_ok])
+ AS_IF([test "x$ax_pthread_ok" = "xyes"], [break])
+
+ PTHREAD_LIBS=""
+ PTHREAD_CFLAGS=""
+done
+fi
+
+# Various other checks:
+if test "x$ax_pthread_ok" = "xyes"; then
+ ax_pthread_save_CFLAGS="$CFLAGS"
+ ax_pthread_save_LIBS="$LIBS"
+ CFLAGS="$CFLAGS $PTHREAD_CFLAGS"
+ LIBS="$PTHREAD_LIBS $LIBS"
+
+ # Detect AIX lossage: JOINABLE attribute is called UNDETACHED.
+ AC_CACHE_CHECK([for joinable pthread attribute],
+ [ax_cv_PTHREAD_JOINABLE_ATTR],
+ [ax_cv_PTHREAD_JOINABLE_ATTR=unknown
+ for ax_pthread_attr in PTHREAD_CREATE_JOINABLE PTHREAD_CREATE_UNDETACHED; do
+ AC_LINK_IFELSE([AC_LANG_PROGRAM([#include <pthread.h>],
+ [int attr = $ax_pthread_attr; return attr /* ; */])],
+ [ax_cv_PTHREAD_JOINABLE_ATTR=$ax_pthread_attr; break],
+ [])
+ done
+ ])
+ AS_IF([test "x$ax_cv_PTHREAD_JOINABLE_ATTR" != "xunknown" && \
+ test "x$ax_cv_PTHREAD_JOINABLE_ATTR" != "xPTHREAD_CREATE_JOINABLE" && \
+ test "x$ax_pthread_joinable_attr_defined" != "xyes"],
+ [AC_DEFINE_UNQUOTED([PTHREAD_CREATE_JOINABLE],
+ [$ax_cv_PTHREAD_JOINABLE_ATTR],
+ [Define to necessary symbol if this constant
+ uses a non-standard name on your system.])
+ ax_pthread_joinable_attr_defined=yes
+ ])
+
+ AC_CACHE_CHECK([whether more special flags are required for pthreads],
+ [ax_cv_PTHREAD_SPECIAL_FLAGS],
+ [ax_cv_PTHREAD_SPECIAL_FLAGS=no
+ case $host_os in
+ solaris*)
+ ax_cv_PTHREAD_SPECIAL_FLAGS="-D_POSIX_PTHREAD_SEMANTICS"
+ ;;
+ esac
+ ])
+ AS_IF([test "x$ax_cv_PTHREAD_SPECIAL_FLAGS" != "xno" && \
+ test "x$ax_pthread_special_flags_added" != "xyes"],
+ [PTHREAD_CFLAGS="$ax_cv_PTHREAD_SPECIAL_FLAGS $PTHREAD_CFLAGS"
+ ax_pthread_special_flags_added=yes])
+
+ AC_CACHE_CHECK([for PTHREAD_PRIO_INHERIT],
+ [ax_cv_PTHREAD_PRIO_INHERIT],
+ [AC_LINK_IFELSE([AC_LANG_PROGRAM([[#include <pthread.h>]],
+ [[int i = PTHREAD_PRIO_INHERIT;]])],
+ [ax_cv_PTHREAD_PRIO_INHERIT=yes],
+ [ax_cv_PTHREAD_PRIO_INHERIT=no])
+ ])
+ AS_IF([test "x$ax_cv_PTHREAD_PRIO_INHERIT" = "xyes" && \
+ test "x$ax_pthread_prio_inherit_defined" != "xyes"],
+ [AC_DEFINE([HAVE_PTHREAD_PRIO_INHERIT], [1], [Have PTHREAD_PRIO_INHERIT.])
+ ax_pthread_prio_inherit_defined=yes
+ ])
+
+ CFLAGS="$ax_pthread_save_CFLAGS"
+ LIBS="$ax_pthread_save_LIBS"
+
+ # More AIX lossage: compile with *_r variant
+ if test "x$GCC" != "xyes"; then
+ case $host_os in
+ aix*)
+ AS_CASE(["x/$CC"],
+ [x*/c89|x*/c89_128|x*/c99|x*/c99_128|x*/cc|x*/cc128|x*/xlc|x*/xlc_v6|x*/xlc128|x*/xlc128_v6],
+ [#handle absolute path differently from PATH based program lookup
+ AS_CASE(["x$CC"],
+ [x/*],
+ [AS_IF([AS_EXECUTABLE_P([${CC}_r])],[PTHREAD_CC="${CC}_r"])],
+ [AC_CHECK_PROGS([PTHREAD_CC],[${CC}_r],[$CC])])])
+ ;;
+ esac
+ fi
+fi
+
+test -n "$PTHREAD_CC" || PTHREAD_CC="$CC"
+
+AC_SUBST([PTHREAD_LIBS])
+AC_SUBST([PTHREAD_CFLAGS])
+AC_SUBST([PTHREAD_CC])
+
+# Finally, execute ACTION-IF-FOUND/ACTION-IF-NOT-FOUND:
+if test "x$ax_pthread_ok" = "xyes"; then
+ ifelse([$1],,[AC_DEFINE([HAVE_PTHREAD],[1],[Define if you have POSIX threads libraries and header files.])],[$1])
+ :
+else
+ ax_pthread_ok=no
+ $2
+fi
+AC_LANG_POP
+])dnl AX_PTHREAD
diff --git a/gold/Makefile.am b/gold/Makefile.am
index 675deecb47..f87067aab4 100644
--- a/gold/Makefile.am
+++ b/gold/Makefile.am
@@ -31,8 +31,11 @@ ACLOCAL_AMFLAGS = -I ../bfd -I ../config
ZLIB = @zlibdir@ -lz
ZLIBINC = @zlibinc@
-AM_CFLAGS = $(WARN_CFLAGS) $(LFS_CFLAGS) $(RANDOM_SEED_CFLAGS) $(ZLIBINC)
-AM_CXXFLAGS = $(WARN_CXXFLAGS) $(LFS_CFLAGS) $(RANDOM_SEED_CFLAGS) $(ZLIBINC)
+THREADFLAGS = @PTHREAD_CFLAGS@
+THREADLIBS = @PTHREAD_LIBS@
+
+AM_CFLAGS = $(WARN_CFLAGS) $(LFS_CFLAGS) $(RANDOM_SEED_CFLAGS) $(ZLIBINC) $(THREADFLAGS)
+AM_CXXFLAGS = $(WARN_CXXFLAGS) $(LFS_CFLAGS) $(RANDOM_SEED_CFLAGS) $(ZLIBINC) $(THREADFLAGS)
AM_CPPFLAGS = \
-I$(srcdir) -I$(srcdir)/../include -I$(srcdir)/../elfcpp \
@@ -46,10 +49,6 @@ if PLUGINS
LIBDL = @DLOPEN_LIBS@
endif
-if THREADS
-THREADSLIB = -lpthread
-endif
-
AM_YFLAGS = -d
# Automake 1.10+ disables lex and yacc output file regeneration if
diff --git a/gold/Makefile.in b/gold/Makefile.in
index 1f4f7ea2c7..8a3962e311 100644
--- a/gold/Makefile.in
+++ b/gold/Makefile.in
@@ -87,11 +87,12 @@ subdir = .
DIST_COMMON = NEWS README ChangeLog $(srcdir)/Makefile.in \
$(srcdir)/Makefile.am $(top_srcdir)/configure \
$(am__configure_deps) $(srcdir)/config.in \
- $(srcdir)/../mkinstalldirs $(top_srcdir)/po/Make-in ffsll.c \
- ftruncate.c mremap.c pread.c yyscript.h yyscript.c \
+ $(srcdir)/../mkinstalldirs $(top_srcdir)/po/Make-in pread.c \
+ ffsll.c ftruncate.c mremap.c yyscript.h yyscript.c \
$(srcdir)/../depcomp $(srcdir)/../ylwrap
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/../config/depstand.m4 \
+am__aclocal_m4_deps = $(top_srcdir)/../config/ax_pthread.m4 \
+ $(top_srcdir)/../config/depstand.m4 \
$(top_srcdir)/../config/gettext-sister.m4 \
$(top_srcdir)/../config/lcmessage.m4 \
$(top_srcdir)/../config/lead-dot.m4 \
@@ -152,8 +153,7 @@ am_ld_new_OBJECTS = $(am__objects_4)
ld_new_OBJECTS = $(am_ld_new_OBJECTS)
am__DEPENDENCIES_2 = $(am__DEPENDENCIES_1) libgold.a $(LIBIBERTY) \
$(am__DEPENDENCIES_1) $(am__DEPENDENCIES_1) \
- $(am__DEPENDENCIES_1) $(am__DEPENDENCIES_1) \
- $(am__DEPENDENCIES_1)
+ $(am__DEPENDENCIES_1) $(am__DEPENDENCIES_1)
ld_new_LINK = $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) $(ld_new_LDFLAGS) \
$(LDFLAGS) -o $@
@GCC_TRUE@@NATIVE_LINKER_TRUE@am_ld1_OBJECTS = $(am__objects_4)
@@ -400,8 +400,12 @@ PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
POSUB = @POSUB@
+PTHREAD_CC = @PTHREAD_CC@
+PTHREAD_CFLAGS = @PTHREAD_CFLAGS@
+PTHREAD_LIBS = @PTHREAD_LIBS@
RANDOM_SEED_CFLAGS = @RANDOM_SEED_CFLAGS@
RANLIB = @RANLIB@
+SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
STRIP = @STRIP@
@@ -426,6 +430,7 @@ am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
+ax_pthread_config = @ax_pthread_config@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
@@ -484,8 +489,10 @@ ACLOCAL_AMFLAGS = -I ../bfd -I ../config
# case both are empty.
ZLIB = @zlibdir@ -lz
ZLIBINC = @zlibinc@
-AM_CFLAGS = $(WARN_CFLAGS) $(LFS_CFLAGS) $(RANDOM_SEED_CFLAGS) $(ZLIBINC)
-AM_CXXFLAGS = $(WARN_CXXFLAGS) $(LFS_CFLAGS) $(RANDOM_SEED_CFLAGS) $(ZLIBINC)
+THREADFLAGS = @PTHREAD_CFLAGS@
+THREADLIBS = @PTHREAD_LIBS@
+AM_CFLAGS = $(WARN_CFLAGS) $(LFS_CFLAGS) $(RANDOM_SEED_CFLAGS) $(ZLIBINC) $(THREADFLAGS)
+AM_CXXFLAGS = $(WARN_CXXFLAGS) $(LFS_CFLAGS) $(RANDOM_SEED_CFLAGS) $(ZLIBINC) $(THREADFLAGS)
AM_CPPFLAGS = \
-I$(srcdir) -I$(srcdir)/../include -I$(srcdir)/../elfcpp \
-DLOCALEDIR="\"$(datadir)/locale\"" \
@@ -494,7 +501,6 @@ AM_CPPFLAGS = \
LIBIBERTY = ../libiberty/libiberty.a
@PLUGINS_TRUE@LIBDL = @DLOPEN_LIBS@
-@THREADS_TRUE@THREADSLIB = -lpthread
AM_YFLAGS = -d
# Automake 1.10+ disables lex and yacc output file regeneration if
diff --git a/gold/aclocal.m4 b/gold/aclocal.m4
index 47cb21fc5a..2f34365173 100644
--- a/gold/aclocal.m4
+++ b/gold/aclocal.m4
@@ -1000,6 +1000,7 @@ AC_SUBST([am__tar])
AC_SUBST([am__untar])
]) # _AM_PROG_TAR
+m4_include([../config/ax_pthread.m4])
m4_include([../config/depstand.m4])
m4_include([../config/gettext-sister.m4])
m4_include([../config/lcmessage.m4])
diff --git a/gold/configure b/gold/configure
index 90a706dc51..4a9e5faa1a 100755
--- a/gold/configure
+++ b/gold/configure
@@ -600,6 +600,13 @@ HAVE_NO_USE_LINKER_PLUGIN_FALSE
HAVE_NO_USE_LINKER_PLUGIN_TRUE
HAVE_PUBNAMES_FALSE
HAVE_PUBNAMES_TRUE
+THREADS_FALSE
+THREADS_TRUE
+PTHREAD_CFLAGS
+PTHREAD_LIBS
+PTHREAD_CC
+ax_pthread_config
+SED
zlibinc
zlibdir
LIBOBJS
@@ -711,8 +718,6 @@ DEFAULT_TARGET_AARCH64_FALSE
DEFAULT_TARGET_AARCH64_TRUE
PLUGINS_FALSE
PLUGINS_TRUE
-THREADS_FALSE
-THREADS_TRUE
installed_linker
install_as_default
am__untar
@@ -793,7 +798,6 @@ ac_user_opts='
enable_option_checking
with_sysroot
enable_gold
-enable_threads
enable_plugins
enable_relro
enable_targets
@@ -1444,7 +1448,6 @@ Optional Features:
--disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
--enable-FEATURE[=ARG] include FEATURE [ARG=yes]
--enable-gold[=ARG] build gold [ARG={default,yes,no}]
- --enable-threads multi-threaded linking
--enable-plugins linker plugins
--enable-relro enable -z relro in ELF linker by default
--enable-targets alternative target configurations
@@ -3311,31 +3314,6 @@ fi
-# Check whether --enable-threads was given.
-if test "${enable_threads+set}" = set; then :
- enableval=$enable_threads; case "${enableval}" in
- yes | "") threads=yes ;;
- no) threads=no ;;
- *) threads=yes ;;
- esac
-else
- threads=no
-fi
-
-if test "$threads" = "yes"; then
-
-$as_echo "#define ENABLE_THREADS 1" >>confdefs.h
-
-fi
- if test "$threads" = "yes"; then
- THREADS_TRUE=
- THREADS_FALSE='#'
-else
- THREADS_TRUE='#'
- THREADS_FALSE=
-fi
-
-
# Check whether --enable-plugins was given.
if test "${enable_plugins+set}" = set; then :
enableval=$enable_plugins; case "${enableval}" in
@@ -7043,6 +7021,729 @@ fi
+# Check for pthreads. If available, enable multi-threaded linking
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5
+$as_echo_n "checking for a sed that does not truncate output... " >&6; }
+if test "${ac_cv_path_SED+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/
+ for ac_i in 1 2 3 4 5 6 7; do
+ ac_script="$ac_script$as_nl$ac_script"
+ done
+ echo "$ac_script" 2>/dev/null | sed 99q >conftest.sed
+ { ac_script=; unset ac_script;}
+ if test -z "$SED"; then
+ ac_path_SED_found=false
+ # Loop through the user's path and test for each of PROGNAME-LIST
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_prog in sed gsed; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ ac_path_SED="$as_dir/$ac_prog$ac_exec_ext"
+ { test -f "$ac_path_SED" && $as_test_x "$ac_path_SED"; } || continue
+# Check for GNU ac_path_SED and select it if it is found.
+ # Check for GNU $ac_path_SED
+case `"$ac_path_SED" --version 2>&1` in
+*GNU*)
+ ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;;
+*)
+ ac_count=0
+ $as_echo_n 0123456789 >"conftest.in"
+ while :
+ do
+ cat "conftest.in" "conftest.in" >"conftest.tmp"
+ mv "conftest.tmp" "conftest.in"
+ cp "conftest.in" "conftest.nl"
+ $as_echo '' >> "conftest.nl"
+ "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break
+ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+ as_fn_arith $ac_count + 1 && ac_count=$as_val
+ if test $ac_count -gt ${ac_path_SED_max-0}; then
+ # Best one so far, save it but keep looking for a better one
+ ac_cv_path_SED="$ac_path_SED"
+ ac_path_SED_max=$ac_count
+ fi
+ # 10*(2^10) chars as input seems more than enough
+ test $ac_count -gt 10 && break
+ done
+ rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+ $ac_path_SED_found && break 3
+ done
+ done
+ done
+IFS=$as_save_IFS
+ if test -z "$ac_cv_path_SED"; then
+ as_fn_error "no acceptable sed could be found in \$PATH" "$LINENO" 5
+ fi
+else
+ ac_cv_path_SED=$SED
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_SED" >&5
+$as_echo "$ac_cv_path_SED" >&6; }
+ SED="$ac_cv_path_SED"
+ rm -f conftest.sed
+
+
+
+
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+ax_pthread_ok=no
+
+# We used to check for pthread.h first, but this fails if pthread.h
+# requires special compiler flags (e.g. on Tru64 or Sequent).
+# It gets checked for in the link test anyway.
+
+# First of all, check if the user has set any of the PTHREAD_LIBS,
+# etcetera environment variables, and if threads linking works using
+# them:
+if test "x$PTHREAD_CFLAGS$PTHREAD_LIBS" != "x"; then
+ ax_pthread_save_CC="$CC"
+ ax_pthread_save_CFLAGS="$CFLAGS"
+ ax_pthread_save_LIBS="$LIBS"
+ if test "x$PTHREAD_CC" != "x"; then :
+ CC="$PTHREAD_CC"
+fi
+ CFLAGS="$CFLAGS $PTHREAD_CFLAGS"
+ LIBS="$PTHREAD_LIBS $LIBS"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for pthread_join using $CC $PTHREAD_CFLAGS $PTHREAD_LIBS" >&5
+$as_echo_n "checking for pthread_join using $CC $PTHREAD_CFLAGS $PTHREAD_LIBS... " >&6; }
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char pthread_join ();
+int
+main ()
+{
+return pthread_join ();
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ ax_pthread_ok=yes
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ax_pthread_ok" >&5
+$as_echo "$ax_pthread_ok" >&6; }
+ if test "x$ax_pthread_ok" = "xno"; then
+ PTHREAD_LIBS=""
+ PTHREAD_CFLAGS=""
+ fi
+ CC="$ax_pthread_save_CC"
+ CFLAGS="$ax_pthread_save_CFLAGS"
+ LIBS="$ax_pthread_save_LIBS"
+fi
+
+# We must check for the threads library under a number of different
+# names; the ordering is very important because some systems
+# (e.g. DEC) have both -lpthread and -lpthreads, where one of the
+# libraries is broken (non-POSIX).
+
+# Create a list of thread flags to try. Items starting with a "-" are
+# C compiler flags, and other items are library names, except for "none"
+# which indicates that we try without any flags at all, and "pthread-config"
+# which is a program returning the flags for the Pth emulation library.
+
+ax_pthread_flags="pthreads none -Kthread -pthread -pthreads -mthreads pthread --thread-safe -mt pthread-config"
+
+# The ordering *is* (sometimes) important. Some notes on the
+# individual items follow:
+
+# pthreads: AIX (must check this before -lpthread)
+# none: in case threads are in libc; should be tried before -Kthread and
+# other compiler flags to prevent continual compiler warnings
+# -Kthread: Sequent (threads in libc, but -Kthread needed for pthread.h)
+# -pthread: Linux/gcc (kernel threads), BSD/gcc (userland threads), Tru64
+# (Note: HP C rejects this with "bad form for `-t' option")
+# -pthreads: Solaris/gcc (Note: HP C also rejects)
+# -mt: Sun Workshop C (may only link SunOS threads [-lthread], but it
+# doesn't hurt to check since this sometimes defines pthreads and
+# -D_REENTRANT too), HP C (must be checked before -lpthread, which
+# is present but should not be used directly; and before -mthreads,
+# because the compiler interprets this as "-mt" + "-hreads")
+# -mthreads: Mingw32/gcc, Lynx/gcc
+# pthread: Linux, etcetera
+# --thread-safe: KAI C++
+# pthread-config: use pthread-config program (for GNU Pth library)
+
+case $host_os in
+
+ freebsd*)
+
+ # -kthread: FreeBSD kernel threads (preferred to -pthread since SMP-able)
+ # lthread: LinuxThreads port on FreeBSD (also preferred to -pthread)
+
+ ax_pthread_flags="-kthread lthread $ax_pthread_flags"
+ ;;
+
+ hpux*)
+
+ # From the cc(1) man page: "[-mt] Sets various -D flags to enable
+ # multi-threading and also sets -lpthread."
+
+ ax_pthread_flags="-mt -pthread pthread $ax_pthread_flags"
+ ;;
+
+ openedition*)
+
+ # IBM z/OS requires a feature-test macro to be defined in order to
+ # enable POSIX threads at all, so give the user a hint if this is
+ # not set. (We don't define these ourselves, as they can affect
+ # other portions of the system API in unpredictable ways.)
+
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+# if !defined(_OPEN_THREADS) && !defined(_UNIX03_THREADS)
+ AX_PTHREAD_ZOS_MISSING
+# endif
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ $EGREP "AX_PTHREAD_ZOS_MISSING" >/dev/null 2>&1; then :
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: IBM z/OS requires -D_OPEN_THREADS or -D_UNIX03_THREADS to enable pthreads support." >&5
+$as_echo "$as_me: WARNING: IBM z/OS requires -D_OPEN_THREADS or -D_UNIX03_THREADS to enable pthreads support." >&2;}
+fi
+rm -f conftest*
+
+ ;;
+
+ solaris*)
+
+ # On Solaris (at least, for some versions), libc contains stubbed
+ # (non-functional) versions of the pthreads routines, so link-based
+ # tests will erroneously succeed. (N.B.: The stubs are missing
+ # pthread_cleanup_push, or rather a function called by this macro,
+ # so we could check for that, but who knows whether they'll stub
+ # that too in a future libc.) So we'll check first for the
+ # standard Solaris way of linking pthreads (-mt -lpthread).
+
+ ax_pthread_flags="-mt,pthread pthread $ax_pthread_flags"
+ ;;
+esac
+
+# GCC generally uses -pthread, or -pthreads on some platforms (e.g. SPARC)
+
+if test "x$GCC" = "xyes"; then :
+ ax_pthread_flags="-pthread -pthreads $ax_pthread_flags"
+fi
+
+# The presence of a feature test macro requesting re-entrant function
+# definitions is, on some systems, a strong hint that pthreads support is
+# correctly enabled
+
+case $host_os in
+ darwin* | hpux* | linux* | osf* | solaris*)
+ ax_pthread_check_macro="_REENTRANT"
+ ;;
+
+ aix*)
+ ax_pthread_check_macro="_THREAD_SAFE"
+ ;;
+
+ *)
+ ax_pthread_check_macro="--"
+ ;;
+esac
+if test "x$ax_pthread_check_macro" = "x--"; then :
+ ax_pthread_check_cond=0
+else
+ ax_pthread_check_cond="!defined($ax_pthread_check_macro)"
+fi
+
+# Are we compiling with Clang?
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC is Clang" >&5
+$as_echo_n "checking whether $CC is Clang... " >&6; }
+if test "${ax_cv_PTHREAD_CLANG+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ ax_cv_PTHREAD_CLANG=no
+ # Note that Autoconf sets GCC=yes for Clang as well as GCC
+ if test "x$GCC" = "xyes"; then
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+/* Note: Clang 2.7 lacks __clang_[a-z]+__ */
+# if defined(__clang__) && defined(__llvm__)
+ AX_PTHREAD_CC_IS_CLANG
+# endif
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ $EGREP "AX_PTHREAD_CC_IS_CLANG" >/dev/null 2>&1; then :
+ ax_cv_PTHREAD_CLANG=yes
+fi
+rm -f conftest*
+
+ fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ax_cv_PTHREAD_CLANG" >&5
+$as_echo "$ax_cv_PTHREAD_CLANG" >&6; }
+ax_pthread_clang="$ax_cv_PTHREAD_CLANG"
+
+ax_pthread_clang_warning=no
+
+# Clang needs special handling, because older versions handle the -pthread
+# option in a rather... idiosyncratic way
+
+if test "x$ax_pthread_clang" = "xyes"; then
+
+ # Clang takes -pthread; it has never supported any other flag
+
+ # (Note 1: This will need to be revisited if a system that Clang
+ # supports has POSIX threads in a separate library. This tends not
+ # to be the way of modern systems, but it's conceivable.)
+
+ # (Note 2: On some systems, notably Darwin, -pthread is not needed
+ # to get POSIX threads support; the API is always present and
+ # active. We could reasonably leave PTHREAD_CFLAGS empty. But
+ # -pthread does define _REENTRANT, and while the Darwin headers
+ # ignore this macro, third-party headers might not.)
+
+ PTHREAD_CFLAGS="-pthread"
+ PTHREAD_LIBS=
+
+ ax_pthread_ok=yes
+
+ # However, older versions of Clang make a point of warning the user
+ # that, in an invocation where only linking and no compilation is
+ # taking place, the -pthread option has no effect ("argument unused
+ # during compilation"). They expect -pthread to be passed in only
+ # when source code is being compiled.
+ #
+ # Problem is, this is at odds with the way Automake and most other
+ # C build frameworks function, which is that the same flags used in
+ # compilation (CFLAGS) are also used in linking. Many systems
+ # supported by AX_PTHREAD require exactly this for POSIX threads
+ # support, and in fact it is often not straightforward to specify a
+ # flag that is used only in the compilation phase and not in
+ # linking. Such a scenario is extremely rare in practice.
+ #
+ # Even though use of the -pthread flag in linking would only print
+ # a warning, this can be a nuisance for well-run software projects
+ # that build with -Werror. So if the active version of Clang has
+ # this misfeature, we search for an option to squash it.
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether Clang needs flag to prevent \"argument unused\" warning when linking with -pthread" >&5
+$as_echo_n "checking whether Clang needs flag to prevent \"argument unused\" warning when linking with -pthread... " >&6; }
+if test "${ax_cv_PTHREAD_CLANG_NO_WARN_FLAG+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ ax_cv_PTHREAD_CLANG_NO_WARN_FLAG=unknown
+ # Create an alternate version of $ac_link that compiles and
+ # links in two steps (.c -> .o, .o -> exe) instead of one
+ # (.c -> exe), because the warning occurs only in the second
+ # step
+ ax_pthread_save_ac_link="$ac_link"
+ ax_pthread_sed='s/conftest\.\$ac_ext/conftest.$ac_objext/g'
+ ax_pthread_link_step=`$as_echo "$ac_link" | sed "$ax_pthread_sed"`
+ ax_pthread_2step_ac_link="($ac_compile) && (echo ==== >&5) && ($ax_pthread_link_step)"
+ ax_pthread_save_CFLAGS="$CFLAGS"
+ for ax_pthread_try in '' -Qunused-arguments -Wno-unused-command-line-argument unknown; do
+ if test "x$ax_pthread_try" = "xunknown"; then :
+ break
+fi
+ CFLAGS="-Werror -Wunknown-warning-option $ax_pthread_try -pthread $ax_pthread_save_CFLAGS"
+ ac_link="$ax_pthread_save_ac_link"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+int main(void){return 0;}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ ac_link="$ax_pthread_2step_ac_link"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+int main(void){return 0;}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ break
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ done
+ ac_link="$ax_pthread_save_ac_link"
+ CFLAGS="$ax_pthread_save_CFLAGS"
+ if test "x$ax_pthread_try" = "x"; then :
+ ax_pthread_try=no
+fi
+ ax_cv_PTHREAD_CLANG_NO_WARN_FLAG="$ax_pthread_try"
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ax_cv_PTHREAD_CLANG_NO_WARN_FLAG" >&5
+$as_echo "$ax_cv_PTHREAD_CLANG_NO_WARN_FLAG" >&6; }
+
+ case "$ax_cv_PTHREAD_CLANG_NO_WARN_FLAG" in
+ no | unknown) ;;
+ *) PTHREAD_CFLAGS="$ax_cv_PTHREAD_CLANG_NO_WARN_FLAG $PTHREAD_CFLAGS" ;;
+ esac
+
+fi # $ax_pthread_clang = yes
+
+if test "x$ax_pthread_ok" = "xno"; then
+for ax_pthread_try_flag in $ax_pthread_flags; do
+
+ case $ax_pthread_try_flag in
+ none)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether pthreads work without any flags" >&5
+$as_echo_n "checking whether pthreads work without any flags... " >&6; }
+ ;;
+
+ -mt,pthread)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether pthreads work with -mt -lpthread" >&5
+$as_echo_n "checking whether pthreads work with -mt -lpthread... " >&6; }
+ PTHREAD_CFLAGS="-mt"
+ PTHREAD_LIBS="-lpthread"
+ ;;
+
+ -*)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether pthreads work with $ax_pthread_try_flag" >&5
+$as_echo_n "checking whether pthreads work with $ax_pthread_try_flag... " >&6; }
+ PTHREAD_CFLAGS="$ax_pthread_try_flag"
+ ;;
+
+ pthread-config)
+ # Extract the first word of "pthread-config", so it can be a program name with args.
+set dummy pthread-config; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ax_pthread_config+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ax_pthread_config"; then
+ ac_cv_prog_ax_pthread_config="$ax_pthread_config" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ax_pthread_config="yes"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+ test -z "$ac_cv_prog_ax_pthread_config" && ac_cv_prog_ax_pthread_config="no"
+fi
+fi
+ax_pthread_config=$ac_cv_prog_ax_pthread_config
+if test -n "$ax_pthread_config"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ax_pthread_config" >&5
+$as_echo "$ax_pthread_config" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ if test "x$ax_pthread_config" = "xno"; then :
+ continue
+fi
+ PTHREAD_CFLAGS="`pthread-config --cflags`"
+ PTHREAD_LIBS="`pthread-config --ldflags` `pthread-config --libs`"
+ ;;
+
+ *)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for the pthreads library -l$ax_pthread_try_flag" >&5
+$as_echo_n "checking for the pthreads library -l$ax_pthread_try_flag... " >&6; }
+ PTHREAD_LIBS="-l$ax_pthread_try_flag"
+ ;;
+ esac
+
+ ax_pthread_save_CFLAGS="$CFLAGS"
+ ax_pthread_save_LIBS="$LIBS"
+ CFLAGS="$CFLAGS $PTHREAD_CFLAGS"
+ LIBS="$PTHREAD_LIBS $LIBS"
+
+ # Check for various functions. We must include pthread.h,
+ # since some functions may be macros. (On the Sequent, we
+ # need a special flag -Kthread to make this header compile.)
+ # We check for pthread_join because it is in -lpthread on IRIX
+ # while pthread_create is in libc. We check for pthread_attr_init
+ # due to DEC craziness with -lpthreads. We check for
+ # pthread_cleanup_push because it is one of the few pthread
+ # functions on Solaris that doesn't have a non-functional libc stub.
+ # We try pthread_create on general principles.
+
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <pthread.h>
+# if $ax_pthread_check_cond
+# error "$ax_pthread_check_macro must be defined"
+# endif
+ static void routine(void *a) { a = 0; }
+ static void *start_routine(void *a) { return a; }
+int
+main ()
+{
+pthread_t th; pthread_attr_t attr;
+ pthread_create(&th, 0, start_routine, 0);
+ pthread_join(th, 0);
+ pthread_attr_init(&attr);
+ pthread_cleanup_push(routine, 0);
+ pthread_cleanup_pop(0) /* ; */
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ ax_pthread_ok=yes
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+
+ CFLAGS="$ax_pthread_save_CFLAGS"
+ LIBS="$ax_pthread_save_LIBS"
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ax_pthread_ok" >&5
+$as_echo "$ax_pthread_ok" >&6; }
+ if test "x$ax_pthread_ok" = "xyes"; then :
+ break
+fi
+
+ PTHREAD_LIBS=""
+ PTHREAD_CFLAGS=""
+done
+fi
+
+# Various other checks:
+if test "x$ax_pthread_ok" = "xyes"; then
+ ax_pthread_save_CFLAGS="$CFLAGS"
+ ax_pthread_save_LIBS="$LIBS"
+ CFLAGS="$CFLAGS $PTHREAD_CFLAGS"
+ LIBS="$PTHREAD_LIBS $LIBS"
+
+ # Detect AIX lossage: JOINABLE attribute is called UNDETACHED.
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for joinable pthread attribute" >&5
+$as_echo_n "checking for joinable pthread attribute... " >&6; }
+if test "${ax_cv_PTHREAD_JOINABLE_ATTR+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ ax_cv_PTHREAD_JOINABLE_ATTR=unknown
+ for ax_pthread_attr in PTHREAD_CREATE_JOINABLE PTHREAD_CREATE_UNDETACHED; do
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <pthread.h>
+int
+main ()
+{
+int attr = $ax_pthread_attr; return attr /* ; */
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ ax_cv_PTHREAD_JOINABLE_ATTR=$ax_pthread_attr; break
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ done
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ax_cv_PTHREAD_JOINABLE_ATTR" >&5
+$as_echo "$ax_cv_PTHREAD_JOINABLE_ATTR" >&6; }
+ if test "x$ax_cv_PTHREAD_JOINABLE_ATTR" != "xunknown" && \
+ test "x$ax_cv_PTHREAD_JOINABLE_ATTR" != "xPTHREAD_CREATE_JOINABLE" && \
+ test "x$ax_pthread_joinable_attr_defined" != "xyes"; then :
+
+cat >>confdefs.h <<_ACEOF
+#define PTHREAD_CREATE_JOINABLE $ax_cv_PTHREAD_JOINABLE_ATTR
+_ACEOF
+
+ ax_pthread_joinable_attr_defined=yes
+
+fi
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether more special flags are required for pthreads" >&5
+$as_echo_n "checking whether more special flags are required for pthreads... " >&6; }
+if test "${ax_cv_PTHREAD_SPECIAL_FLAGS+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ ax_cv_PTHREAD_SPECIAL_FLAGS=no
+ case $host_os in
+ solaris*)
+ ax_cv_PTHREAD_SPECIAL_FLAGS="-D_POSIX_PTHREAD_SEMANTICS"
+ ;;
+ esac
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ax_cv_PTHREAD_SPECIAL_FLAGS" >&5
+$as_echo "$ax_cv_PTHREAD_SPECIAL_FLAGS" >&6; }
+ if test "x$ax_cv_PTHREAD_SPECIAL_FLAGS" != "xno" && \
+ test "x$ax_pthread_special_flags_added" != "xyes"; then :
+ PTHREAD_CFLAGS="$ax_cv_PTHREAD_SPECIAL_FLAGS $PTHREAD_CFLAGS"
+ ax_pthread_special_flags_added=yes
+fi
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for PTHREAD_PRIO_INHERIT" >&5
+$as_echo_n "checking for PTHREAD_PRIO_INHERIT... " >&6; }
+if test "${ax_cv_PTHREAD_PRIO_INHERIT+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <pthread.h>
+int
+main ()
+{
+int i = PTHREAD_PRIO_INHERIT;
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ ax_cv_PTHREAD_PRIO_INHERIT=yes
+else
+ ax_cv_PTHREAD_PRIO_INHERIT=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ax_cv_PTHREAD_PRIO_INHERIT" >&5
+$as_echo "$ax_cv_PTHREAD_PRIO_INHERIT" >&6; }
+ if test "x$ax_cv_PTHREAD_PRIO_INHERIT" = "xyes" && \
+ test "x$ax_pthread_prio_inherit_defined" != "xyes"; then :
+
+$as_echo "#define HAVE_PTHREAD_PRIO_INHERIT 1" >>confdefs.h
+
+ ax_pthread_prio_inherit_defined=yes
+
+fi
+
+ CFLAGS="$ax_pthread_save_CFLAGS"
+ LIBS="$ax_pthread_save_LIBS"
+
+ # More AIX lossage: compile with *_r variant
+ if test "x$GCC" != "xyes"; then
+ case $host_os in
+ aix*)
+ case "x/$CC" in #(
+ x*/c89|x*/c89_128|x*/c99|x*/c99_128|x*/cc|x*/cc128|x*/xlc|x*/xlc_v6|x*/xlc128|x*/xlc128_v6) :
+ #handle absolute path differently from PATH based program lookup
+ case "x$CC" in #(
+ x/*) :
+ if { test -f ${CC}_r && $as_test_x ${CC}_r; }; then :
+ PTHREAD_CC="${CC}_r"
+fi ;; #(
+ *) :
+ for ac_prog in ${CC}_r
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_PTHREAD_CC+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$PTHREAD_CC"; then
+ ac_cv_prog_PTHREAD_CC="$PTHREAD_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_PTHREAD_CC="$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+PTHREAD_CC=$ac_cv_prog_PTHREAD_CC
+if test -n "$PTHREAD_CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $PTHREAD_CC" >&5
+$as_echo "$PTHREAD_CC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$PTHREAD_CC" && break
+done
+test -n "$PTHREAD_CC" || PTHREAD_CC="$CC"
+ ;;
+esac ;; #(
+ *) :
+ ;;
+esac
+ ;;
+ esac
+ fi
+fi
+
+test -n "$PTHREAD_CC" || PTHREAD_CC="$CC"
+
+
+
+
+
+# Finally, execute ACTION-IF-FOUND/ACTION-IF-NOT-FOUND:
+if test "x$ax_pthread_ok" = "xyes"; then
+ threads=yes
+ :
+else
+ ax_pthread_ok=no
+ threads=no
+fi
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+if test "$threads" = "yes"; then
+
+$as_echo "#define ENABLE_THREADS 1" >>confdefs.h
+
+fi
+ if test "$threads" = "yes"; then
+ THREADS_TRUE=
+ THREADS_FALSE='#'
+else
+ THREADS_TRUE='#'
+ THREADS_FALSE=
+fi
+
+
ac_fn_c_check_decl "$LINENO" "basename" "ac_cv_have_decl_basename" "$ac_includes_default"
if test "x$ac_cv_have_decl_basename" = x""yes; then :
ac_have_decl=1
@@ -7878,10 +8579,6 @@ else
am__EXEEXT_FALSE=
fi
-if test -z "${THREADS_TRUE}" && test -z "${THREADS_FALSE}"; then
- as_fn_error "conditional \"THREADS\" was never defined.
-Usually this means the macro was only invoked conditionally." "$LINENO" 5
-fi
if test -z "${PLUGINS_TRUE}" && test -z "${PLUGINS_FALSE}"; then
as_fn_error "conditional \"PLUGINS\" was never defined.
Usually this means the macro was only invoked conditionally." "$LINENO" 5
@@ -7995,6 +8692,10 @@ if test -z "${IFUNC_STATIC_TRUE}" && test -z "${IFUNC_STATIC_FALSE}"; then
as_fn_error "conditional \"IFUNC_STATIC\" was never defined.
Usually this means the macro was only invoked conditionally." "$LINENO" 5
fi
+if test -z "${THREADS_TRUE}" && test -z "${THREADS_FALSE}"; then
+ as_fn_error "conditional \"THREADS\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
if test -z "${HAVE_PUBNAMES_TRUE}" && test -z "${HAVE_PUBNAMES_FALSE}"; then
as_fn_error "conditional \"HAVE_PUBNAMES\" was never defined.
Usually this means the macro was only invoked conditionally." "$LINENO" 5
diff --git a/gold/configure.ac b/gold/configure.ac
index 5ba43f2f95..c46b455fda 100644
--- a/gold/configure.ac
+++ b/gold/configure.ac
@@ -85,21 +85,6 @@ AC_ARG_ENABLE(gold,
AC_SUBST(install_as_default)
AC_SUBST(installed_linker)
-dnl For now threads are a configure time option.
-AC_ARG_ENABLE([threads],
-[ --enable-threads multi-threaded linking],
-[case "${enableval}" in
- yes | "") threads=yes ;;
- no) threads=no ;;
- *) threads=yes ;;
- esac],
-[threads=no])
-if test "$threads" = "yes"; then
- AC_DEFINE(ENABLE_THREADS, 1,
- [Define to do multi-threaded linking])
-fi
-AM_CONDITIONAL(THREADS, test "$threads" = "yes")
-
AC_ARG_ENABLE([plugins],
[ --enable-plugins linker plugins],
[case "${enableval}" in
@@ -570,6 +555,14 @@ fi
# Link in zlib if we can. This allows us to write compressed sections.
AM_ZLIB
+# Check for pthreads. If available, enable multi-threaded linking
+AX_PTHREAD([threads=yes], [threads=no])
+if test "$threads" = "yes"; then
+ AC_DEFINE(ENABLE_THREADS, 1,
+ [Define to do multi-threaded linking])
+fi
+AM_CONDITIONAL(THREADS, test "$threads" = "yes")
+
dnl We have to check these in C, not C++, because autoconf generates
dnl tests which have no type information, and current glibc provides
dnl multiple declarations of functions like basename when compiling
diff --git a/gold/testsuite/Makefile.in b/gold/testsuite/Makefile.in
index bbf8dc146b..96f3a08b9f 100644
--- a/gold/testsuite/Makefile.in
+++ b/gold/testsuite/Makefile.in
@@ -1054,7 +1054,8 @@ check_PROGRAMS = $(am__EXEEXT_1) $(am__EXEEXT_2) $(am__EXEEXT_3) \
subdir = testsuite
DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/../config/depstand.m4 \
+am__aclocal_m4_deps = $(top_srcdir)/../config/ax_pthread.m4 \
+ $(top_srcdir)/../config/depstand.m4 \
$(top_srcdir)/../config/gettext-sister.m4 \
$(top_srcdir)/../config/lcmessage.m4 \
$(top_srcdir)/../config/lead-dot.m4 \
@@ -2711,8 +2712,12 @@ PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
POSUB = @POSUB@
+PTHREAD_CC = @PTHREAD_CC@
+PTHREAD_CFLAGS = @PTHREAD_CFLAGS@
+PTHREAD_LIBS = @PTHREAD_LIBS@
RANDOM_SEED_CFLAGS = @RANDOM_SEED_CFLAGS@
RANLIB = @RANLIB@
+SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
STRIP = @STRIP@
@@ -2737,6 +2742,7 @@ am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
+ax_pthread_config = @ax_pthread_config@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
--
2.14.3