This is the mail archive of the binutils@sourceware.org mailing list for the binutils project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

Re: [PATCH 1/2] Add port for Phoenix-RTOS in common configure files.


I've just applied both patches as you mentioned above. config.sub is
already applied in GNU config repo, so it can be synced in newlib.

2016-05-09 21:34 GMT+02:00 Jeff Johnston <jjohnstn@redhat.com>:
> Ok, done.  Newlib bits checked in.  You will have to post changes for top-level configure.ac (instead of configure
> directly) and config.sub to the appropriate mailing lists.
>
> -- Jeff J.
>
> ----- Original Message -----
>> Hi Jeff,
>>
>> Actually noone ever thought about it on our side. If this won't break
>> building without specifiing any version (until we decide how will it
>> work for us and how to manage it) then I'm ok with it.
>> Thank you for your big help.
>>
>> Regards,
>> Jakub
>>
>> 2016-05-09 20:20 GMT+02:00 Jeff Johnston <jjohnstn@redhat.com>:
>> > Hi Jakub,
>> >
>> > One minor comment.  I think you might want to follow rtems and cygwin and
>> > use * after phoenix everywhere to allow you to add a version specifier like
>> > rtems does.
>> >
>> > (e.g. configure --target=sparc-rtems4.8)
>> >
>> > If you are ok with that, I'll just add it to configure.host for you and
>> > check the
>> > changes in.
>> >
>> > -- Jeff J.
>> >
>> > ----- Original Message -----
>> >> I don't get it why was the attachement stripped from previous mail.
>> >> Here is link to FTP with this patch:
>> >>
>> >> http://files.phoesys.com/newlib/0001-Add-port-for-Phoenix-RTOS-in-common-configure-files.patch
>> >>
>> >> Thanks,
>> >> Jakub
>> >>
>> >> 2016-05-09 10:46 GMT+02:00 Jakub Sejdak <jakub.sejdak@phoesys.com>:
>> >> > Hi Jeff,
>> >> >
>> >> > It seems, that git-send-email replaced tabs with spaces in mail body
>> >> > and that caused errors, because after regeneration there was no other
>> >> > changes.
>> >> > I attached patch once again (created from fresh newlib, just in case)
>> >> > and added notification to proper mailing lists.
>> >> >
>> >> > Thanks,
>> >> > Jakub
>> >> >
>> >> > 2016-05-06 23:25 GMT+02:00 Jeff Johnston <jjohnstn@redhat.com>:
>> >> >> Jakub,
>> >> >>
>> >> >> Please read the top-level MAINTAINERS file for files that need to
>> >> >> be submitted to other mailing lists.  For example, configure,
>> >> >> config.sub,
>> >> >> configure.ac
>> >> >>
>> >> >> Please also update your current newlib and generate a patch that
>> >> >> you can attach (I get all kinds of rejections trying to copy the
>> >> >> data out of the mail).  I have already committed your 2nd patch
>> >> >> which applied fine.
>> >> >>
>> >> >> Thanks,
>> >> >>
>> >> >> -- Jeff J.
>> >> >>
>> >> >> ----- Original Message -----
>> >> >>> From: Kuba Sejdak <jakub.sejdak@phoesys.com>
>> >> >>>
>> >> >>> ---
>> >> >>>  COPYING.NEWLIB               | 26 ++++++++++++++++++++++++++
>> >> >>>  config.sub                   |  3 +++
>> >> >>>  configure                    |  6 ++++++
>> >> >>>  newlib/configure.host        | 10 ++++++++++
>> >> >>>  newlib/libc/sys/configure    |  3 +++
>> >> >>>  newlib/libc/sys/configure.in |  1 +
>> >> >>>  6 files changed, 49 insertions(+)
>> >> >>>
>> >> >>> diff --git a/COPYING.NEWLIB b/COPYING.NEWLIB
>> >> >>> index 24e7c73..e7e1f8a 100644
>> >> >>> --- a/COPYING.NEWLIB
>> >> >>> +++ b/COPYING.NEWLIB
>> >> >>> @@ -1023,3 +1023,29 @@ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
>> >> >>> NEGLIGENCE OR OTHERWISE)
>> >> >>>  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
>> >> >>>  OF
>> >> >>>  THE
>> >> >>>  POSSIBILITY OF SUCH DAMAGE.
>> >> >>>
>> >> >>> +(45) Phoenix Systems - Phoenix-RTOS targets
>> >> >>> +
>> >> >>> +Copyright (c) 2016 Phoenix Systems
>> >> >>> +All rights reserved.
>> >> >>> +
>> >> >>> +Redistribution and use in source and binary forms, with or without
>> >> >>> +modification, are permitted provided that the following conditions
>> >> >>> +are met:
>> >> >>> +1. Redistributions of source code must retain the above copyright
>> >> >>> +   notice, this list of conditions and the following disclaimer.
>> >> >>> +2. Redistributions in binary form must reproduce the above copyright
>> >> >>> +   notice, this list of conditions and the following disclaimer in
>> >> >>> the
>> >> >>> +   documentation and/or other materials provided with the
>> >> >>> distribution.
>> >> >>> +
>> >> >>> +THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS''
>> >> >>> AND
>> >> >>> +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
>> >> >>> +IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
>> >> >>> PURPOSE
>> >> >>> +ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE
>> >> >>> LIABLE
>> >> >>> +FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
>> >> >>> CONSEQUENTIAL
>> >> >>> +DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
>> >> >>> GOODS
>> >> >>> +OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
>> >> >>> +HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
>> >> >>> STRICT
>> >> >>> +LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY
>> >> >>> WAY
>> >> >>> +OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
>> >> >>> OF
>> >> >>> +SUCH DAMAGE.
>> >> >>> +
>> >> >>> diff --git a/config.sub b/config.sub
>> >> >>> index da6d1b6..f7adbde 100755
>> >> >>> --- a/config.sub
>> >> >>> +++ b/config.sub
>> >> >>> @@ -1531,6 +1531,9 @@ case $os in
>> >> >>>               ;;
>> >> >>>       -nacl*)
>> >> >>>               ;;
>> >> >>> +     -phoenix)
>> >> >>> +             os=-phoenix
>> >> >>> +             ;;
>> >> >>>       -none)
>> >> >>>               ;;
>> >> >>>       *)
>> >> >>> diff --git a/configure b/configure
>> >> >>> index 35f231e..90e3e68 100755
>> >> >>> --- a/configure
>> >> >>> +++ b/configure
>> >> >>> @@ -3673,6 +3673,9 @@ case "${target}" in
>> >> >>>    *-*-netware*)
>> >> >>>      noconfigdirs="$noconfigdirs target-newlib target-libgloss"
>> >> >>>      ;;
>> >> >>> +  *-*-phoenix)
>> >> >>> +    noconfigdirs="$noconfigdirs target-libgloss"
>> >> >>> +    ;;
>> >> >>>    *-*-tpf*)
>> >> >>>      noconfigdirs="$noconfigdirs target-newlib target-libgloss"
>> >> >>>      ;;
>> >> >>> @@ -3764,6 +3767,9 @@ case "${target}" in
>> >> >>>    arm-*-pe*)
>> >> >>>      noconfigdirs="$noconfigdirs target-libgloss"
>> >> >>>      ;;
>> >> >>> +  arm-*-phoenix*)
>> >> >>> +    noconfigdirs="$noconfigdirs target-libgloss"
>> >> >>> +    ;;
>> >> >>>    arm-*-riscix*)
>> >> >>>      noconfigdirs="$noconfigdirs ld target-libgloss"
>> >> >>>      ;;
>> >> >>> diff --git a/newlib/configure.host b/newlib/configure.host
>> >> >>> index bb163ec..9bc40de 100644
>> >> >>> --- a/newlib/configure.host
>> >> >>> +++ b/newlib/configure.host
>> >> >>> @@ -385,6 +385,11 @@ case "${host}" in
>> >> >>>       signal_dir=
>> >> >>>       sys_dir=netware
>> >> >>>       ;;
>> >> >>> +  *-*-phoenix)
>> >> >>> +     sys_dir=phoenix
>> >> >>> +     posix_dir=posix
>> >> >>> +     unix_dir=unix
>> >> >>> +     ;;
>> >> >>>    *-*-rtems*)                        # generic RTEMS support
>> >> >>>       sys_dir=rtems
>> >> >>>       posix_dir=posix
>> >> >>> @@ -578,6 +583,11 @@ case "${host}" in
>> >> >>>       newlib_cflags="${newlib_cflags} -DHAVE_OPENDIR -DHAVE_RENAME
>> >> >>>       -DSIGNAL_PROVIDED -D_COMPILING_NEWLIB -DHAVE_BLKSIZE
>> >> >>>       -DHAVE_FCNTL
>> >> >>>       -DMALLOC_PROVIDED"
>> >> >>>       syscall_dir=syscalls
>> >> >>>       ;;
>> >> >>> +  *-*-phoenix)
>> >> >>> +     newlib_cflags="${newlib_cflags} -DMISSING_SYSCALL_NAMES
>> >> >>> -D_COMPILING_NEWLIB
>> >> >>> -DHAVE_BLKSIZE -DHAVE_NANOSLEEP"
>> >> >>> +     default_newlib_io_long_long="yes"
>> >> >>> +     syscall_dir=
>> >> >>> +     ;;
>> >> >>>  # RTEMS supplies its own versions of some routines:
>> >> >>>  #       malloc()            (reentrant version)
>> >> >>>  #       exit()              RTEMS has a "global" reent to flush
>> >> >>> diff --git a/newlib/libc/sys/configure b/newlib/libc/sys/configure
>> >> >>> index d64b0dd..55c6e13 100755
>> >> >>> --- a/newlib/libc/sys/configure
>> >> >>> +++ b/newlib/libc/sys/configure
>> >> >>> @@ -797,6 +797,7 @@ m88kbug
>> >> >>>  mmixware
>> >> >>>  netware
>> >> >>>  or1k
>> >> >>> +phoenix
>> >> >>>  rdos
>> >> >>>  rtems
>> >> >>>  sh
>> >> >>> @@ -11828,6 +11829,8 @@ subdirs="$subdirs a29khif"
>> >> >>>   ;;
>> >> >>>       or1k) subdirs="$subdirs or1k"
>> >> >>>   ;;
>> >> >>> +     phoenix) subdirs="$subdirs phoenix"
>> >> >>> + ;;
>> >> >>>       rdos) subdirs="$subdirs rdos"
>> >> >>>   ;;
>> >> >>>       rtems) subdirs="$subdirs rtems"
>> >> >>> diff --git a/newlib/libc/sys/configure.in
>> >> >>> b/newlib/libc/sys/configure.in
>> >> >>> index b50a6d3..bc6cb88 100644
>> >> >>> --- a/newlib/libc/sys/configure.in
>> >> >>> +++ b/newlib/libc/sys/configure.in
>> >> >>> @@ -34,6 +34,7 @@ if test -n "${sys_dir}"; then
>> >> >>>       mmixware) AC_CONFIG_SUBDIRS(mmixware) ;;
>> >> >>>       netware) AC_CONFIG_SUBDIRS(netware) ;;
>> >> >>>       or1k) AC_CONFIG_SUBDIRS(or1k) ;;
>> >> >>> +     phoenix) AC_CONFIG_SUBDIRS(phoenix) ;;
>> >> >>>       rdos) AC_CONFIG_SUBDIRS(rdos) ;;
>> >> >>>       rtems) AC_CONFIG_SUBDIRS(rtems) ;;
>> >> >>>       sh) AC_CONFIG_SUBDIRS(sh) ;;
>> >> >>> --
>> >> >>> 2.7.4
>> >> >>>
>> >> >>>
>> >>
>>


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]