This is the mail archive of the binutils@sourceware.org mailing list for the binutils project.
| Index Nav: | [Date Index] [Subject Index] [Author Index] [Thread Index] | |
|---|---|---|
| Message Nav: | [Date Prev] [Date Next] | [Thread Prev] [Thread Next] |
| Other format: | [Raw text] | |
There's been a long-standing inconsistency about whether error messages
start with upper or lower case. tc-mips.c mostly seemed to prefer upper
case, so that's what I tended to use (and lately have been asking other
people to use). But there are some exceptions, and files in the
top-level gas/ directory almost always start with lower case instead.
Starting with lower case is also what the GNU standard prefers:
The string /message/ should not begin with a capital letter when it
follows a program name and/or file name, because that isnât the
beginning of a sentence. (The sentence conceptually starts at the
beginning of the line.) Also, it should not end with a period.
so this patch converts tc-mips.c to that form. Hope I didn't miss any...
I also took the chance to replace "illegal" with "invalid".
Tested on mips64-linux-gnu and applied.
Richard
gas/
* config/tc-mips.c (mips_check_isa_supports_ase, reg_lookup)
(mips_parse_argument_token, validate_micromips_insn, md_begin)
(check_regno, match_float_constant, check_completed_insn, append_insn)
(match_insn, match_mips16_insn, match_insns, macro_start)
(macro_build_ldst_constoffset, load_register, macro, mips_ip)
(mips16_ip, mips_set_option_string, md_parse_option)
(mips_after_parse_args, mips_after_parse_args, md_pcrel_from)
(md_apply_fix, s_align, s_option, s_mipsset, s_tls_rel_directive)
(s_gpword, s_gpdword, s_ehword, s_nan, tc_gen_reloc, md_convert_frag)
(s_mips_end, s_mips_ent, s_mips_frame, s_mips_mask, mips_parse_cpu):
Start error messages with a lower-case letter. Do not end error
messages with a period. Wrap long messages to 80 character-lines.
Use "cannot" instead of "can't" and "can not".
gas/testsuite/
* gas/mips/ase-errors-1.l, gas/mips/ase-errors-2.l,
gas/mips/ase-errors-3.l, gas/mips/ase-errors-4.l, gas/mips/at-2.l,
gas/mips/baddata1.l, gas/mips/elf-rel30.l, gas/mips/illegal.l,
gas/mips/jalr.l, gas/mips/ldstla-32-1.l, gas/mips/ldstla-32-mips3-1.l,
gas/mips/lui-1.l, gas/mips/macro-warn-1.l, gas/mips/macro-warn-1-n32.l,
gas/mips/macro-warn-2.l, gas/mips/macro-warn-3.l,
gas/mips/macro-warn-4.l, gas/mips/micromips-branch-delay.l,
gas/mips/micromips-branch-relax.l,
gas/mips/micromips-branch-relax-pic.l, gas/mips/micromips-ill.l,
gas/mips/micromips.l, gas/mips/micromips-size-0.l,
gas/mips/micromips-size-1.l, gas/mips/micromips-warn-branch-delay.l,
gas/mips/micromips-warn.l, gas/mips/mips16e-64.l,
gas/mips/mips16e-save-err.l, gas/mips/mips1-fp.l,
gas/mips/mips32r2-fp32.l, gas/mips/mips32r2-ill.l,
gas/mips/mips32-sf32.l, gas/mips/mips4-branch-likely.l,
gas/mips/mips4-fp.l, gas/mips/mips5-fp.l, gas/mips/mips64-mips3d.l,
gas/mips/mips-double-float-flag.l, gas/mips/mips-gp64-fp32.l,
gas/mips/mips-gp64-fp64.l, gas/mips/mips-hard-float-flag.l,
gas/mips/mips-macro-ill-nofp.l, gas/mips/mips-macro-ill-sfp.l,
gas/mips/nan-error-1.l, gas/mips/nan-error-2.l, gas/mips/noat-2.l,
gas/mips/noat-3.l, gas/mips/noat-4.l, gas/mips/noat-5.l,
gas/mips/noat-6.l, gas/mips/noat-7.l, gas/mips/octeon-ill.l,
gas/mips/r5900-error-vu0.l, gas/mips/r5900-nollsc.l,
gas/mips/relax-bc1any.l, gas/mips/relax-bposge.l, gas/mips/relax.l,
gas/mips/relax-swap1.l, gas/mips/relax-swap2.l, gas/mips/set-arch.l,
gas/mips/tls-ill.l, gas/mips/vr5400-ill.l: Adjust expected output.
Index: gas/config/tc-mips.c
===================================================================
--- gas/config/tc-mips.c 2013-08-19 19:13:49.984509525 +0100
+++ gas/config/tc-mips.c 2013-08-19 19:13:53.184537892 +0100
@@ -1885,10 +1885,10 @@ mips_check_isa_supports_ase (const struc
base = mips_opts.micromips ? "microMIPS" : "MIPS";
size = ISA_HAS_64BIT_REGS (mips_opts.isa) ? 64 : 32;
if (min_rev < 0)
- as_warn (_("The %d-bit %s architecture does not support the"
+ as_warn (_("the %d-bit %s architecture does not support the"
" `%s' extension"), size, base, ase->name);
else
- as_warn (_("The `%s' extension requires %s%d revision %d or greater"),
+ as_warn (_("the `%s' extension requires %s%d revision %d or greater"),
ase->name, base, size, min_rev);
}
if ((ase->flags & FP64_ASES)
@@ -1896,7 +1896,7 @@ mips_check_isa_supports_ase (const struc
&& (warned_fp32 & ase->flags) != ase->flags)
{
warned_fp32 |= ase->flags;
- as_warn (_("The `%s' extension requires 64-bit FPRs"), ase->name);
+ as_warn (_("the `%s' extension requires 64-bit FPRs"), ase->name);
}
}
@@ -2713,7 +2713,7 @@ reg_lookup (char **s, unsigned int types
else
{
if (types & RWARN)
- as_warn (_("Unrecognized register name `%s'"), *s);
+ as_warn (_("unrecognized register name `%s'"), *s);
regno = ~0;
}
if (regnop)
@@ -2939,7 +2939,7 @@ mips_parse_argument_token (char *s, char
SKIP_SPACE_TABS (s);
if (!mips_parse_register (&s, ®no2, NULL))
{
- set_insn_error (0, _("Invalid register range"));
+ set_insn_error (0, _("invalid register range"));
return 0;
}
@@ -2958,14 +2958,14 @@ mips_parse_argument_token (char *s, char
my_getExpression (&element, s);
if (element.X_op != O_constant)
{
- set_insn_error (0, _("Vector element must be constant"));
+ set_insn_error (0, _("vector element must be constant"));
return 0;
}
s = expr_end;
SKIP_SPACE_TABS (s);
if (*s != ']')
{
- set_insn_error (0, _("Missing `]'"));
+ set_insn_error (0, _("missing `]'"));
return 0;
}
++s;
@@ -3281,7 +3281,7 @@ validate_micromips_insn (const struct mi
length = micromips_insn_length (opc);
if (length != 2 && length != 4)
{
- as_bad (_("Internal error: bad microMIPS opcode (incorrect length: %u): "
+ as_bad (_("internal error: bad microMIPS opcode (incorrect length: %u): "
"%s %s"), length, opc->name, opc->args);
return 0;
}
@@ -3289,7 +3289,7 @@ validate_micromips_insn (const struct mi
if ((length == 2 && (major & 7) != 1 && (major & 6) != 2)
|| (length == 4 && (major & 7) != 0 && (major & 4) != 4))
{
- as_bad (_("Internal error: bad microMIPS opcode "
+ as_bad (_("internal error: bad microMIPS opcode "
"(opcode/length mismatch): %s %s"), opc->name, opc->args);
return 0;
}
@@ -3320,7 +3320,7 @@ md_begin (void)
}
if (! bfd_set_arch_mach (stdoutput, bfd_arch_mips, file_mips_arch))
- as_warn (_("Could not set architecture and machine"));
+ as_warn (_("could not set architecture and machine"));
op_hash = hash_new ();
@@ -3335,7 +3335,7 @@ md_begin (void)
fprintf (stderr, _("internal error: can't hash `%s': %s\n"),
mips_opcodes[i].name, retval);
/* Probably a memory allocation problem? Give up now. */
- as_fatal (_("Broken assembler. No assembly attempted."));
+ as_fatal (_("broken assembler, no assembly attempted"));
}
do
{
@@ -3426,7 +3426,7 @@ md_begin (void)
}
if (broken)
- as_fatal (_("Broken assembler. No assembly attempted."));
+ as_fatal (_("broken assembler, no assembly attempted"));
/* We add all the general register names to the symbol table. This
helps us detect invalid uses of them. */
@@ -4425,7 +4425,7 @@ check_regno (struct mips_arg_info *arg,
&& (regno & 1) != 0
&& HAVE_32BIT_FPRS
&& !mips_oddfpreg_ok (arg->insn->insn_mo, arg->opnum))
- as_warn (_("Float register should be even, was %d"), regno);
+ as_warn (_("float register should be even, was %d"), regno);
if (type == OP_REG_CCC)
{
@@ -4437,12 +4437,12 @@ check_regno (struct mips_arg_info *arg,
if ((regno & 1) != 0
&& ((length >= 3 && strcmp (name + length - 3, ".ps") == 0)
|| (length >= 5 && strncmp (name + length - 5, "any2", 4) == 0)))
- as_warn (_("Condition code register should be even for %s, was %d"),
+ as_warn (_("condition code register should be even for %s, was %d"),
name, regno);
if ((regno & 3) != 0
&& (length >= 5 && strncmp (name + length - 5, "any4", 4) == 0))
- as_warn (_("Condition code register should be 0 or 4 for %s, was %d"),
+ as_warn (_("condition code register should be 0 or 4 for %s, was %d"),
name, regno);
}
}
@@ -5310,7 +5310,7 @@ match_float_constant (struct mips_arg_in
else
record_alignment (new_seg, length == 4 ? 2 : 3);
if (seg == now_seg)
- as_bad (_("Can't use floating point insn in this section"));
+ as_bad (_("cannot use `%s' in this section"), arg->insn->insn_mo->name);
/* Set the argument to the current address in the section. */
imm->X_op = O_absent;
@@ -5439,9 +5439,9 @@ check_completed_insn (struct mips_arg_in
if (arg->seen_at)
{
if (AT == ATREG)
- as_warn (_("Used $at without \".set noat\""));
+ as_warn (_("used $at without \".set noat\""));
else
- as_warn (_("Used $%u with \".set at=$%u\""), AT, AT);
+ as_warn (_("used $%u with \".set at=$%u\""), AT, AT);
}
}
@@ -6406,7 +6406,7 @@ append_insn (struct mips_cl_insn *ip, ex
&& micromips_insn_length (ip->insn_mo) != 2)
|| ((prev_pinfo2 & INSN2_BRANCH_DELAY_32BIT) != 0
&& micromips_insn_length (ip->insn_mo) != 4)))
- as_warn (_("Wrong size instruction in a %u-bit branch delay slot"),
+ as_warn (_("wrong size instruction in a %u-bit branch delay slot"),
(prev_pinfo2 & INSN2_BRANCH_DELAY_16BIT) != 0 ? 16 : 32);
if (address_expr == NULL)
@@ -7086,10 +7086,10 @@ match_insn (struct mips_cl_insn *insn, c
{
if (arg.opnum == 2)
set_insn_error
- (0, _("Source and destination must be different"));
+ (0, _("source and destination must be different"));
else if (arg.last_regno == 31)
set_insn_error
- (0, _("A destination register must be supplied"));
+ (0, _("a destination register must be supplied"));
}
check_completed_insn (&arg);
return TRUE;
@@ -7420,7 +7420,7 @@ match_mips16_insn (struct mips_cl_insn *
match_invalid_for_isa (void)
{
set_insn_error_ss
- (0, _("Opcode not supported on this processor: %s (%s)"),
+ (0, _("opcode not supported on this processor: %s (%s)"),
mips_cpu_info_from_arch (mips_opts.arch)->name,
mips_cpu_info_from_isa (mips_opts.isa)->name);
}
@@ -7499,10 +7499,10 @@ match_insns (struct mips_cl_insn *insn,
if (!seen_valid_for_size)
{
if (mips_opts.insn32)
- set_insn_error (0, _("Opcode not supported in the `insn32' mode"));
+ set_insn_error (0, _("opcode not supported in the `insn32' mode"));
else
set_insn_error_i
- (0, _("Unrecognized %d-bit version of microMIPS opcode"),
+ (0, _("unrecognized %d-bit version of microMIPS opcode"),
8 * forced_insn_length);
return TRUE;
}
@@ -7586,16 +7586,16 @@ macro_start (void)
macro_warning (relax_substateT subtype)
{
if (subtype & RELAX_DELAY_SLOT)
- return _("Macro instruction expanded into multiple instructions"
+ return _("macro instruction expanded into multiple instructions"
" in a branch delay slot");
else if (subtype & RELAX_NOMACRO)
- return _("Macro instruction expanded into multiple instructions");
+ return _("macro instruction expanded into multiple instructions");
else if (subtype & (RELAX_DELAY_SLOT_SIZE_FIRST
| RELAX_DELAY_SLOT_SIZE_SECOND))
return ((subtype & RELAX_DELAY_SLOT_16BIT)
- ? _("Macro instruction expanded into a wrong size instruction"
+ ? _("macro instruction expanded into a wrong size instruction"
" in a 16-bit branch delay slot")
- : _("Macro instruction expanded into a wrong size instruction"
+ : _("macro instruction expanded into a wrong size instruction"
" in a 32-bit branch delay slot"));
else
return 0;
@@ -8056,7 +8056,7 @@ macro_build_ldst_constoffset (expression
macro_build (ep, op, "t,o(b)", treg, BFD_RELOC_LO16, AT);
if (!mips_opts.at)
- as_bad (_("Macro used $at after \".set noat\""));
+ as_bad (_("macro used $at after \".set noat\""));
}
}
@@ -8204,7 +8204,7 @@ load_register (int reg, expressionS *ep,
char value[32];
sprintf_vma (value, ep->X_add_number);
- as_bad (_("Number (0x%s) larger than 32 bits"), value);
+ as_bad (_("number (0x%s) larger than 32 bits"), value);
macro_build (ep, "addiu", "t,r,j", reg, 0, BFD_RELOC_LO16);
return;
}
@@ -8224,7 +8224,7 @@ load_register (int reg, expressionS *ep,
if (ep->X_add_number == 3)
generic_bignum[3] = 0;
else if (ep->X_add_number > 4)
- as_bad (_("Number larger than 64 bits"));
+ as_bad (_("number larger than 64 bits"));
lo32.X_op = O_constant;
lo32.X_add_number = generic_bignum[0] + (generic_bignum[1] << 16);
hi32.X_op = O_constant;
@@ -8640,7 +8640,7 @@ load_address (int reg, expressionS *ep,
abort ();
if (!mips_opts.at && *used_at == 1)
- as_bad (_("Macro used $at after \".set noat\""));
+ as_bad (_("macro used $at after \".set noat\""));
}
/* Move the contents of register SOURCE into register DEST. */
@@ -9251,7 +9251,7 @@ macro (struct mips_cl_insn *ip, char *st
{
do_true:
/* result is always true */
- as_warn (_("Branch %s is always true"), ip->insn_mo->name);
+ as_warn (_("branch %s is always true"), ip->insn_mo->name);
macro_build (&offset_expr, "b", "p");
break;
}
@@ -9467,7 +9467,7 @@ macro (struct mips_cl_insn *ip, char *st
do_div3:
if (op[2] == 0)
{
- as_warn (_("Divide by zero."));
+ as_warn (_("divide by zero"));
if (mips_trap)
macro_build (NULL, "teq", TRAP_FMT, ZERO, ZERO, 7);
else
@@ -9577,7 +9577,7 @@ macro (struct mips_cl_insn *ip, char *st
do_divi:
if (imm_expr.X_add_number == 0)
{
- as_warn (_("Divide by zero."));
+ as_warn (_("divide by zero"));
if (mips_trap)
macro_build (NULL, "teq", TRAP_FMT, ZERO, ZERO, 7);
else
@@ -9688,7 +9688,7 @@ macro (struct mips_cl_insn *ip, char *st
if (offset_expr.X_op != O_symbol
&& offset_expr.X_op != O_constant)
{
- as_bad (_("Expression too complex"));
+ as_bad (_("expression too complex"));
offset_expr.X_op = O_constant;
}
@@ -9776,7 +9776,7 @@ macro (struct mips_cl_insn *ip, char *st
relax_switch ();
}
if (!IS_SEXT_32BIT_NUM (offset_expr.X_add_number))
- as_bad (_("Offset too large"));
+ as_bad (_("offset too large"));
macro_build_lui (&offset_expr, tempreg);
macro_build (&offset_expr, ADDRESS_ADDI_INSN, "t,r,j",
tempreg, tempreg, BFD_RELOC_LO16);
@@ -10298,7 +10298,7 @@ macro (struct mips_cl_insn *ip, char *st
gas_assert (mips_opts.micromips);
if (mips_opts.insn32)
{
- as_bad (_("Opcode not supported in the `insn32' mode `%s'"), str);
+ as_bad (_("opcode not supported in the `insn32' mode `%s'"), str);
break;
}
jals = 1;
@@ -10342,18 +10342,18 @@ macro (struct mips_cl_insn *ip, char *st
if (mips_pic == SVR4_PIC && !HAVE_NEWABI)
{
if (mips_cprestore_offset < 0)
- as_warn (_("No .cprestore pseudo-op used in PIC code"));
+ as_warn (_("no .cprestore pseudo-op used in PIC code"));
else
{
if (!mips_frame_reg_valid)
{
- as_warn (_("No .frame pseudo-op used in PIC code"));
+ as_warn (_("no .frame pseudo-op used in PIC code"));
/* Quiet this warning. */
mips_frame_reg_valid = 1;
}
if (!mips_cprestore_valid)
{
- as_warn (_("No .cprestore pseudo-op used in PIC code"));
+ as_warn (_("no .cprestore pseudo-op used in PIC code"));
/* Quiet this warning. */
mips_cprestore_valid = 1;
}
@@ -10374,7 +10374,7 @@ macro (struct mips_cl_insn *ip, char *st
gas_assert (mips_opts.micromips);
if (mips_opts.insn32)
{
- as_bad (_("Opcode not supported in the `insn32' mode `%s'"), str);
+ as_bad (_("opcode not supported in the `insn32' mode `%s'"), str);
break;
}
jals = 1;
@@ -10486,18 +10486,18 @@ macro (struct mips_cl_insn *ip, char *st
macro_build_jalr (&offset_expr, mips_cprestore_offset >= 0);
if (mips_cprestore_offset < 0)
- as_warn (_("No .cprestore pseudo-op used in PIC code"));
+ as_warn (_("no .cprestore pseudo-op used in PIC code"));
else
{
if (!mips_frame_reg_valid)
{
- as_warn (_("No .frame pseudo-op used in PIC code"));
+ as_warn (_("no .frame pseudo-op used in PIC code"));
/* Quiet this warning. */
mips_frame_reg_valid = 1;
}
if (!mips_cprestore_valid)
{
- as_warn (_("No .cprestore pseudo-op used in PIC code"));
+ as_warn (_("no .cprestore pseudo-op used in PIC code"));
/* Quiet this warning. */
mips_cprestore_valid = 1;
}
@@ -10512,7 +10512,7 @@ macro (struct mips_cl_insn *ip, char *st
}
}
else if (mips_pic == VXWORKS_PIC)
- as_bad (_("Non-PIC jump used in PIC library"));
+ as_bad (_("non-PIC jump used in PIC library"));
else
abort ();
@@ -10920,7 +10920,7 @@ macro (struct mips_cl_insn *ip, char *st
if (offset_expr.X_op != O_constant
&& offset_expr.X_op != O_symbol)
{
- as_bad (_("Expression too complex"));
+ as_bad (_("expression too complex"));
offset_expr.X_op = O_constant;
}
@@ -10930,7 +10930,7 @@ macro (struct mips_cl_insn *ip, char *st
char value [32];
sprintf_vma (value, offset_expr.X_add_number);
- as_bad (_("Number (0x%s) larger than 32 bits"), value);
+ as_bad (_("number (0x%s) larger than 32 bits"), value);
}
/* A constant expression in PIC code can be handled just as it
@@ -11575,7 +11575,7 @@ macro (struct mips_cl_insn *ip, char *st
if (offset_expr.X_op != O_symbol
&& offset_expr.X_op != O_constant)
{
- as_bad (_("Expression too complex"));
+ as_bad (_("expression too complex"));
offset_expr.X_op = O_constant;
}
@@ -11585,7 +11585,7 @@ macro (struct mips_cl_insn *ip, char *st
char value [32];
sprintf_vma (value, offset_expr.X_add_number);
- as_bad (_("Number (0x%s) larger than 32 bits"), value);
+ as_bad (_("number (0x%s) larger than 32 bits"), value);
}
if (mips_pic == NO_PIC || offset_expr.X_op == O_constant)
@@ -12139,7 +12139,7 @@ macro (struct mips_cl_insn *ip, char *st
}
if (op[1] == 0)
{
- as_warn (_("Instruction %s: result is always false"),
+ as_warn (_("instruction %s: result is always false"),
ip->insn_mo->name);
move_register (op[0], 0);
break;
@@ -12292,7 +12292,7 @@ macro (struct mips_cl_insn *ip, char *st
}
if (op[1] == 0)
{
- as_warn (_("Instruction %s: result is always true"),
+ as_warn (_("instruction %s: result is always true"),
ip->insn_mo->name);
macro_build (&expr1, HAVE_32BIT_GPRS ? "addiu" : "daddiu", "t,r,j",
op[0], 0, BFD_RELOC_LO16);
@@ -12577,11 +12577,11 @@ macro (struct mips_cl_insn *ip, char *st
default:
/* FIXME: Check if this is one of the itbl macros, since they
are added dynamically. */
- as_bad (_("Macro %s not implemented yet"), ip->insn_mo->name);
+ as_bad (_("macro %s not implemented yet"), ip->insn_mo->name);
break;
}
if (!mips_opts.at && used_at)
- as_bad (_("Macro used $at after \".set noat\""));
+ as_bad (_("macro used $at after \".set noat\""));
}
/* Implement macros in mips16 mode. */
@@ -12918,7 +12918,7 @@ mips_ip (char *str, struct mips_cl_insn
first = mips_lookup_insn (hash, str, end, &opcode_extra);
if (first == NULL)
{
- set_insn_error (0, _("Unrecognized opcode"));
+ set_insn_error (0, _("unrecognized opcode"));
return;
}
@@ -12934,7 +12934,7 @@ mips_ip (char *str, struct mips_cl_insn
if (!match_insns (insn, first, past, tokens, opcode_extra, FALSE)
&& !match_insns (insn, first, past, tokens, opcode_extra, TRUE))
- set_insn_error (0, _("Illegal operands"));
+ set_insn_error (0, _("invalid operands"));
obstack_free (&mips_operand_tokens, tokens);
}
@@ -12980,7 +12980,7 @@ mips16_ip (char *str, struct mips_cl_ins
}
/* Fall through. */
default:
- set_insn_error (0, _("Unrecognized opcode"));
+ set_insn_error (0, _("unrecognized opcode"));
return;
}
@@ -12993,7 +12993,7 @@ mips16_ip (char *str, struct mips_cl_ins
if (!first)
{
- set_insn_error (0, _("Unrecognized opcode"));
+ set_insn_error (0, _("unrecognized opcode"));
return;
}
@@ -13002,7 +13002,7 @@ mips16_ip (char *str, struct mips_cl_ins
return;
if (!match_mips16_insns (insn, first, tokens))
- set_insn_error (0, _("Illegal operands"));
+ set_insn_error (0, _("invalid operands"));
obstack_free (&mips_operand_tokens, tokens);
}
@@ -13329,7 +13329,7 @@ static int support_64bit_objects(void)
mips_set_option_string (const char **string_ptr, const char *new_value)
{
if (*string_ptr != 0 && strcasecmp (*string_ptr, new_value) != 0)
- as_warn (_("A different %s was already specified, is now %s"),
+ as_warn (_("a different %s was already specified, is now %s"),
string_ptr == &mips_arch_string ? "-march" : "-mtune",
new_value);
@@ -13622,7 +13622,7 @@ md_parse_option (int c, char *arg)
case OPTION_64:
mips_abi = N64_ABI;
if (!support_64bit_objects())
- as_fatal (_("No compiled in support for 64 bit object file format"));
+ as_fatal (_("no compiled in support for 64 bit object file format"));
break;
case OPTION_GP32:
@@ -13668,7 +13668,7 @@ md_parse_option (int c, char *arg)
{
mips_abi = N64_ABI;
if (! support_64bit_objects())
- as_fatal (_("No compiled in support for 64 bit object file "
+ as_fatal (_("no compiled in support for 64 bit object file "
"format"));
}
else if (strcmp (arg, "eabi") == 0)
@@ -13715,7 +13715,7 @@ md_parse_option (int c, char *arg)
mips_flag_nan2008 = FALSE;
else
{
- as_fatal (_("Invalid NaN setting -mnan=%s"), arg);
+ as_fatal (_("invalid NaN setting -mnan=%s"), arg);
return 0;
}
break;
@@ -13764,7 +13764,7 @@ mips_after_parse_args (void)
if (strncmp (TARGET_OS, "pe", 2) == 0)
{
if (g_switch_seen && g_switch_value != 0)
- as_bad (_("-G not supported in this configuration."));
+ as_bad (_("-G not supported in this configuration"));
g_switch_value = 0;
}
@@ -13790,7 +13790,8 @@ mips_after_parse_args (void)
There's no harm in specifying both as long as the ISA levels
are the same. */
if (file_mips_isa != arch_info->isa)
- as_bad (_("-%s conflicts with the other architecture options, which imply -%s"),
+ as_bad (_("-%s conflicts with the other architecture options,"
+ " which imply -%s"),
mips_cpu_info_from_isa (file_mips_isa)->name,
mips_cpu_info_from_isa (arch_info->isa)->name);
}
@@ -13951,7 +13952,8 @@ md_pcrel_from (fixS *fixP)
/* We have no relocation type for PC relative MIPS16 instructions. */
if (fixP->fx_addsy && S_GET_SEGMENT (fixP->fx_addsy) != now_seg)
as_bad_where (fixP->fx_file, fixP->fx_line,
- _("PC relative MIPS16 instruction references a different section"));
+ _("PC relative MIPS16 instruction references"
+ " a different section"));
return addr;
}
}
@@ -14292,7 +14294,7 @@ md_apply_fix (fixS *fixP, valueT *valP,
}
else
as_bad_where (fixP->fx_file, fixP->fx_line,
- _("Unsupported constant in relocation"));
+ _("unsupported constant in relocation"));
}
break;
@@ -14331,7 +14333,7 @@ md_apply_fix (fixS *fixP, valueT *valP,
case BFD_RELOC_16_PCREL_S2:
if ((*valP & 0x3) != 0)
as_bad_where (fixP->fx_file, fixP->fx_line,
- _("Branch to misaligned address (%lx)"), (long) *valP);
+ _("branch to misaligned address (%lx)"), (long) *valP);
/* We need to save the bits in the instruction since fixup_segment()
might be deleting the relocation entry (i.e., a branch within
@@ -14375,7 +14377,7 @@ md_apply_fix (fixS *fixP, valueT *valP,
and there's nothing we can do to fix this instruction
without turning it into a longer sequence. */
as_bad_where (fixP->fx_file, fixP->fx_line,
- _("Branch out of range"));
+ _("branch out of range"));
}
break;
@@ -14473,10 +14475,10 @@ s_align (int x ATTRIBUTE_UNUSED)
temp = get_absolute_expression ();
if (temp > max_alignment)
- as_bad (_("Alignment too large: %d. assumed."), temp = max_alignment);
+ as_bad (_("alignment too large, %d assumed"), temp = max_alignment);
else if (temp < 0)
{
- as_warn (_("Alignment negative: 0 assumed."));
+ as_warn (_("alignment negative, 0 assumed"));
temp = 0;
}
if (*input_line_pointer == ',')
@@ -14772,7 +14774,7 @@ s_option (int x ATTRIBUTE_UNUSED)
}
}
else
- as_warn (_("Unrecognized option \"%s\""), opt);
+ as_warn (_("unrecognized option \"%s\""), opt);
*input_line_pointer = c;
demand_empty_rest_of_line ();
@@ -14816,7 +14818,7 @@ s_mipsset (int x ATTRIBUTE_UNUSED)
char *s = name + 3;
if (!reg_lookup (&s, RTYPE_NUM | RTYPE_GP, &mips_opts.at))
- as_bad (_("Unrecognized register name `%s'"), s);
+ as_bad (_("unrecognized register name `%s'"), s);
}
else if (strcmp (name, "at") == 0)
{
@@ -15035,7 +15037,7 @@ s_mipsset (int x ATTRIBUTE_UNUSED)
}
else
{
- as_warn (_("Tried to set unrecognized symbol: %s\n"), name);
+ as_warn (_("tried to set unrecognized symbol: %s\n"), name);
}
mips_check_isa_supports_ases ();
*input_line_pointer = ch;
@@ -15392,7 +15394,7 @@ s_tls_rel_directive (const size_t bytes,
if (ex.X_op != O_symbol)
{
- as_bad (_("Unsupported use of %s"), dirstr);
+ as_bad (_("unsupported use of %s"), dirstr);
ignore_rest_of_line ();
}
@@ -15483,7 +15485,7 @@ s_gpword (int ignore ATTRIBUTE_UNUSED)
if (ex.X_op != O_symbol || ex.X_add_number != 0)
{
- as_bad (_("Unsupported use of .gpword"));
+ as_bad (_("unsupported use of .gpword"));
ignore_rest_of_line ();
}
@@ -15521,7 +15523,7 @@ s_gpdword (int ignore ATTRIBUTE_UNUSED)
if (ex.X_op != O_symbol || ex.X_add_number != 0)
{
- as_bad (_("Unsupported use of .gpdword"));
+ as_bad (_("unsupported use of .gpdword"));
ignore_rest_of_line ();
}
@@ -15553,7 +15555,7 @@ s_ehword (int ignore ATTRIBUTE_UNUSED)
if (ex.X_op != O_symbol || ex.X_add_number != 0)
{
- as_bad (_("Unsupported use of .ehword"));
+ as_bad (_("unsupported use of .ehword"));
ignore_rest_of_line ();
}
@@ -15628,7 +15630,7 @@ s_nan (int ignore ATTRIBUTE_UNUSED)
&& memcmp (input_line_pointer, str_legacy, i) == 0)
mips_flag_nan2008 = FALSE;
else
- as_bad (_("Bad .nan directive"));
+ as_bad (_("bad .nan directive"));
input_line_pointer += i;
demand_empty_rest_of_line ();
@@ -16427,7 +16429,8 @@ tc_gen_reloc (asection *section ATTRIBUT
if (reloc->howto == NULL)
{
as_bad_where (fixp->fx_file, fixp->fx_line,
- _("Can not represent %s relocation in this object file format"),
+ _("cannot represent %s relocation in this object file"
+ " format"),
bfd_get_reloc_code_name (code));
retval[0] = NULL;
}
@@ -16521,7 +16524,7 @@ md_convert_frag (bfd *abfd ATTRIBUTE_UNU
int i;
as_warn_where (fragp->fr_file, fragp->fr_line,
- _("Relaxed out-of-range branch into a jump"));
+ _("relaxed out-of-range branch into a jump"));
if (RELAX_BRANCH_UNCOND (fragp->fr_subtype))
goto uncond;
@@ -16774,7 +16777,7 @@ md_convert_frag (bfd *abfd ATTRIBUTE_UNU
/* Relax 32-bit branches to a sequence of instructions. */
as_warn_where (fragp->fr_file, fragp->fr_line,
- _("Relaxed out-of-range branch into a jump"));
+ _("relaxed out-of-range branch into a jump"));
/* Set the short-delay-slot bit. */
short_ds = al && (insn & 0x02000000) != 0;
@@ -17441,7 +17444,7 @@ s_mips_end (int x ATTRIBUTE_UNUSED)
if (!cur_proc_ptr)
{
- as_warn (_(".end directive without a preceding .ent directive."));
+ as_warn (_(".end directive without a preceding .ent directive"));
demand_empty_rest_of_line ();
return;
}
@@ -17450,7 +17453,7 @@ s_mips_end (int x ATTRIBUTE_UNUSED)
{
gas_assert (S_GET_NAME (p));
if (strcmp (S_GET_NAME (p), S_GET_NAME (cur_proc_ptr->func_sym)))
- as_warn (_(".end symbol does not match .ent symbol."));
+ as_warn (_(".end symbol does not match .ent symbol"));
if (debug_type == DEBUG_STABS)
stabs_generate_asm_endfunc (S_GET_NAME (p),
@@ -17527,7 +17530,7 @@ s_mips_ent (int aent)
get_number ();
if ((bfd_get_section_flags (stdoutput, now_seg) & SEC_CODE) == 0)
- as_warn (_(".ent or .aent not in text section."));
+ as_warn (_(".ent or .aent not in text section"));
if (!aent && cur_proc_ptr)
as_warn (_("missing .end"));
@@ -17583,7 +17586,7 @@ s_mips_frame (int ignore ATTRIBUTE_UNUSE
if (*input_line_pointer++ != ','
|| get_absolute_expression_and_terminator (&val) != ',')
{
- as_warn (_("Bad .frame directive"));
+ as_warn (_("bad .frame directive"));
--input_line_pointer;
demand_empty_rest_of_line ();
return;
@@ -17620,7 +17623,7 @@ s_mips_mask (int reg_type)
if (get_absolute_expression_and_terminator (&mask) != ',')
{
- as_warn (_("Bad .mask/.fmask directive"));
+ as_warn (_("bad .mask/.fmask directive"));
--input_line_pointer;
demand_empty_rest_of_line ();
return;
@@ -17891,7 +17894,7 @@ mips_parse_cpu (const char *option, cons
if (mips_matching_cpu_name_p (p->name, cpu_string))
return p;
- as_bad (_("Bad value (%s) for %s"), cpu_string, option);
+ as_bad (_("bad value (%s) for %s"), cpu_string, option);
return 0;
}
Attachment:
lower-case-testsuite.diff.bz2
Description: BZip2 compressed data
| Index Nav: | [Date Index] [Subject Index] [Author Index] [Thread Index] | |
|---|---|---|
| Message Nav: | [Date Prev] [Date Next] | [Thread Prev] [Thread Next] |