This is the mail archive of the
binutils@sources.redhat.com
mailing list for the binutils project.
Re: [PATCH] *New* target configuration -- tic4x (TYPO)
- From: "Svein E. Seldal" <Svein dot Seldal at solidas dot com>
- Cc: binutils <binutils at sources dot redhat dot com>
- Date: Tue, 13 Aug 2002 21:03:08 +0200
- Subject: Re: [PATCH] *New* target configuration -- tic4x (TYPO)
- References: <3D595350.2050907@solidas.com>
OOps. A typo in the patch. Delete the previous and use this one...
> 2002-08-13 Svein E. Seldal <Svein.Seldal@solidas.com>
>
> * config.sub: Added tic4x (and c4x) target
> * configure.in: Added tic4x (and c4x) target
> * configure: Regenerate.
>
> bfd/
> 2002-08-13 Svein E. Seldal <Svein.Seldal@solidas.com>
>
> * Makefile.am: Added support for tic4x target
> * Makefile.in: Regenerate.
> * config.bfd: Add support for tic4x-*-*coff* and c4x-*-*coff*.
> * configure.in: Add support for tic4x.
> * configure: Regenerate.
>
> gas/
> 2002-08-13 Svein E. Seldal <Svein.Seldal@solidas.com>
>
> * configure.in: Added support for tic4x-*-* and c4x-*-*
> * configure: Regenerated.
>
> ld/
> 2002-08-13 Svein E. Seldal <Svein.Seldal@solidas.com>
>
> * Makefile.am: Added support for tic4x-*-*.
> * configure.tgt: Added support for tic4x-*-*.
> * Makefile.in: Regenerate.
>
> opcodes/
> 2002-08-13 Svein E. Seldal <Svein.Seldal@solidas.com>
>
> * Makefile.am: Added support for tic4x-*-*
> * configure.in: Added support for tic4x-*-*
? Patch
? SES_BFDfiles.txt
? SES_log.txt
? patches
Index: ChangeLog
===================================================================
RCS file: /cvs/src/src/ChangeLog,v
retrieving revision 1.247
diff -c -3 -p -r1.247 ChangeLog
*** ChangeLog 6 Aug 2002 09:18:28 -0000 1.247
--- ChangeLog 13 Aug 2002 18:50:12 -0000
***************
*** 1,3 ****
--- 1,9 ----
+ 2002-08-13 Svein E. Seldal <Svein.Seldal@solidas.com>
+
+ * config.sub: Added tic4x (and c4x) target
+ * configure.in: Added tic4x (and c4x) target
+ * configure: Regenerate.
+
2002-08-06 Federico G. Schwindt <fgsch@olimpo.com.br>
* configure.in (hppa*-*-openbsd*): Treat like hppa*-*-*elf*.
Index: config.sub
===================================================================
RCS file: /cvs/src/src/config.sub,v
retrieving revision 1.36
diff -c -3 -p -r1.36 config.sub
*** config.sub 17 Jul 2002 00:17:14 -0000 1.36
--- config.sub 13 Aug 2002 18:50:12 -0000
***************
*** 3,9 ****
# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
# 2000, 2001, 2002 Free Software Foundation, Inc.
! timestamp='2002-07-03'
# This file is (in principle) common to ALL GNU software.
# The presence of a machine in this file suggests that SOME GNU software
--- 3,9 ----
# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
# 2000, 2001, 2002 Free Software Foundation, Inc.
! timestamp='2002-08-13'
# This file is (in principle) common to ALL GNU software.
# The presence of a machine in this file suggests that SOME GNU software
*************** case $basic_machine in
*** 229,235 ****
| alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \
| alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \
| arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr \
! | c4x | clipper \
| d10v | d30v | dlx | dsp16xx \
| fr30 | frv \
| h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
--- 229,235 ----
| alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \
| alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \
| arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr \
! | clipper \
| d10v | d30v | dlx | dsp16xx \
| fr30 | frv \
| h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
*************** case $basic_machine in
*** 292,298 ****
| arm-* | armbe-* | armle-* | armeb-* | armv*-* \
| avr-* \
| bs2000-* \
! | c[123]* | c30-* | [cjt]90-* | c54x-* \
| clipper-* | cydra-* \
| d10v-* | d30v-* | dlx-* \
| elxsi-* \
--- 292,298 ----
| arm-* | armbe-* | armle-* | armeb-* | armv*-* \
| avr-* \
| bs2000-* \
! | c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* \
| clipper-* | cydra-* \
| d10v-* | d30v-* | dlx-* \
| elxsi-* \
*************** case $basic_machine in
*** 325,331 ****
| shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \
| sparc-* | sparc64-* | sparc86x-* | sparclet-* | sparclite-* \
| sparcv9-* | sparcv9b-* | strongarm-* | sv1-* | sx?-* \
! | tahoe-* | thumb-* | tic30-* | tic54x-* | tic80-* | tron-* \
| v850-* | v850e-* | vax-* \
| we32k-* \
| x86-* | x86_64-* | xps100-* | xscale-* | xstormy16-* \
--- 325,331 ----
| shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \
| sparc-* | sparc64-* | sparc86x-* | sparclet-* | sparclite-* \
| sparcv9-* | sparcv9b-* | strongarm-* | sv1-* | sx?-* \
! | tahoe-* | thumb-* | tic30-* | tic4x-* | tic54x-* | tic80-* | tron-* \
| v850-* | v850e-* | vax-* \
| we32k-* \
| x86-* | x86_64-* | xps100-* | xscale-* | xstormy16-* \
*************** case $basic_machine in
*** 903,908 ****
--- 903,912 ----
basic_machine=t90-cray
os=-unicos
;;
+ tic4x | c4x)
+ basic_machine=tic4x-unknown
+ os=-coff
+ ;;
tic54x | c54x*)
basic_machine=tic54x-unknown
os=-coff
*************** case $basic_machine in
*** 1036,1045 ****
;;
pmac | pmac-mpw)
basic_machine=powerpc-apple
- ;;
- c4x*)
- basic_machine=c4x-none
- os=-coff
;;
*-unknown)
# Make sure to match an already-canonicalized machine name.
--- 1040,1045 ----
Index: configure
===================================================================
RCS file: /cvs/src/src/configure,v
retrieving revision 1.17
diff -c -3 -p -r1.17 configure
*** configure 31 May 2002 20:09:45 -0000 1.17
--- configure 13 Aug 2002 18:50:12 -0000
***************
*** 1,1612 ****
- #!/bin/sh
-
- ### WARNING: this file contains embedded tabs. Do not run untabify on this file.
-
- # Configuration script
- # Copyright (C) 1988, 90, 91, 92, 93, 94, 95, 96, 97, 98, 1999, 2000, 2001,
- # 2002 Free Software Foundation, Inc.
-
- # This program is free software; you can redistribute it and/or modify
- # it under the terms of the GNU General Public License as published by
- # the Free Software Foundation; either version 2 of the License, or
- # (at your option) any later version.
- #
- # This program is distributed in the hope that it will be useful,
- # but WITHOUT ANY WARRANTY; without even the implied warranty of
- # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- # GNU General Public License for more details.
- #
- # You should have received a copy of the GNU General Public License
- # along with this program; if not, write to the Free Software
- # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-
- # This file was originally written by K. Richard Pixley.
-
- #
- # Shell script to create proper links to machine-dependent files in
- # preparation for compilation.
- #
- # If configure succeeds, it leaves its status in config.status.
- # If configure fails after disturbing the status quo,
- # config.status is removed.
- #
-
- export PATH || (echo "OOPS, this isn't sh. Desperation time. I will feed myself to sh."; sh $0 $argv; kill $$)
-
- remove=rm
- hard_link=ln
- symbolic_link='ln -s'
-
- #for Test
- #remove="echo rm"
- #hard_link="echo ln"
- #symbolic_link="echo ln -s"
-
- # clear some things potentially inherited from environment.
-
- Makefile=Makefile
- Makefile_in=Makefile.in
- arguments=
- build_alias=
- cache_file=config.cache
- cache_file_option=
- configdirs=
- extraconfigdirs=
- diroptions=
- enable_threads=no
- enable_shared=no
- enable_libstdcxx_v3=yes
- exec_prefix=
- exec_prefixoption=
- fatal=
- floating_point=default
- gas=default
- gcc_version=
- gcc_version_trigger=
- host_alias=NOHOST
- host_makefile_frag=
- moveifchange=
- norecursion=
- other_options=
- package_makefile_frag=
- package_makefile_rules_frag=
- prefix=/usr/local
- progname=
- program_prefix=
- program_prefixoption=
- program_suffix=
- program_suffixoption=
- program_transform_name=
- program_transform_nameoption=
- redirect=
- removing=
- site=
- site_makefile_frag=
- site_option=
- srcdir=
- srctrigger=
- subdirs=
- target_alias=NOTARGET
- target_makefile_frag=
- undefs=NOUNDEFS
- version="$Revision: 1.17 $"
- x11=default
- bindir='${exec_prefix}/bin'
- sbindir='${exec_prefix}/sbin'
- libexecdir='${exec_prefix}/libexec'
- datadir='${prefix}/share'
- sysconfdir='${prefix}/etc'
- sharedstatedir='${prefix}/com'
- localstatedir='${prefix}/var'
- libdir='${exec_prefix}/lib'
- includedir='${prefix}/include'
- oldincludedir='/usr/include'
- infodir='${prefix}/info'
- mandir='${prefix}/man'
-
- ### we might need to use some other shell than /bin/sh for running subshells
-
- ### If we are on Windows, search for the shell. This will permit people
- ### to not have /bin/sh, but to be able to see /SOME/PATH/sh configure
- ### without also having to set CONFIG_SHELL. This code will work when
- ### using bash, which sets OSTYPE.
- case "${OSTYPE}" in
- *win32*)
- if [ x${CONFIG_SHELL} = x ]; then
- if [ ! -f /bin/sh ]; then
- if [ x${SHELL} != x ] && [ -f ${SHELL} ]; then
- CONFIG_SHELL=${SHELL}
- export CONFIG_SHELL
- else
- for prog in sh sh.exe bash bash.exe; do
- IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:"
- for dir in $PATH; do
- test -z "$dir" && dir=.
- if test -f $dir/$prog; then
- CONFIG_SHELL=$dir/$prog
- export CONFIG_SHELL
- break
- fi
- done
- IFS="$save_ifs"
- test -n "${CONFIG_SHELL}" && break
- done
- fi
- fi
- fi
- ;;
- esac
-
- config_shell=${CONFIG_SHELL-/bin/sh}
-
- NO_EDIT="This file was generated automatically by configure. Do not edit."
-
- ## this is a little touchy and won't always work, but...
- ##
- ## if the argv[0] starts with a slash then it is an absolute name that can (and
- ## must) be used as is.
- ##
- ## otherwise, if argv[0] has no slash in it, we can assume that it is on the
- ## path. Since PATH might include "." we also add `pwd` to the end of PATH.
- ##
-
- progname=$0
- # if PWD already has a value, it is probably wrong.
- if [ -n "$PWD" ]; then PWD=`${PWDCMD-pwd}`; fi
-
- case "${progname}" in
- /* | [A-Za-z]:[\\/]* ) ;;
- */*) ;;
- *)
- PATH=$PATH:${PWD=`${PWDCMD-pwd}`} ; export PATH
- ;;
- esac
-
- # Export original configure arguments for use by sub-configures.
- TOPLEVEL_CONFIGURE_ARGUMENTS="$progname $@"
- export TOPLEVEL_CONFIGURE_ARGUMENTS
-
- # Loop over all args
-
- while :
- do
-
- # Break out if there are no more args
- case $# in
- 0)
- break
- ;;
- esac
-
- # Get the first arg, and shuffle
- option=$1
- shift
-
- # Make all options have two hyphens
- orig_option=$option # Save original for error messages
- case $option in
- --*) ;;
- -*) option=-$option ;;
- esac
-
- # Split out the argument for options that take them
- case $option in
- --*=*)
- optarg=`echo $option | sed -e 's/^[^=]*=//'`
- arguments="$arguments $option"
- ;;
- # These options have mandatory values. Since we didn't find an = sign,
- # the value must be in the next argument
- --bu* | --cache* | --ex* | --ho* | --pre* | --program-p* | --program-s* | --program-t* | --si* | --sr* | --ta* | --tm* | --x-* | --bi* | --sb* | --li* | --da* | --sy* | --sh* | --lo* | --in* | --ol* | --ma*)
- optarg=$1
- shift
- arguments="$arguments $option=$optarg"
- ;;
- --v)
- arguments="$arguments -v"
- ;;
- --*)
- arguments="$arguments $option"
- ;;
- esac
-
- # Now, process the options
- case $option in
-
- --bi*)
- bindir=$optarg
- diroptions="$diroptions --bindir=$optarg"
- ;;
- --build* | --bu*)
- case "$build_alias" in
- "") build_alias=$optarg ;;
- *) echo '***' Can only configure for one build machine at a time. 1>&2
- fatal=yes
- ;;
- esac
- ;;
- --cache*)
- cache_file=$optarg
- ;;
- --da*)
- datadir=$optarg
- diroptions="$diroptions --datadir=$optarg"
- ;;
- --disable-*)
- enableopt=`echo ${option} | sed 's:^--disable-:enable_:;s:-:_:g'`
- eval $enableopt=no
- disableoptions="$disableoptions $option"
- ;;
- --enable-*)
- case "$option" in
- *=*) ;;
- *) optarg=yes ;;
- esac
-
- enableopt=`echo ${option} | sed 's:^--::;s:=.*$::;s:-:_:g'`
- eval "$enableopt=\$optarg"
- enableoptions="$enableoptions '$option'"
- ;;
- --exec-prefix* | --ex*)
- exec_prefix=$optarg
- exec_prefixoption="--exec-prefix=$optarg"
- ;;
- --gas | --g*)
- gas=yes
- ;;
- --help | --he*)
- fatal=yes
- ;;
- --host* | --ho*)
- case $host_alias in
- NOHOST) host_alias=$optarg ;;
- *) echo '***' Can only configure for one host at a time. 1>&2
- fatal=yes
- ;;
- esac
- ;;
- --inc*)
- includedir=$optarg
- diroptions="$diroptions --includedir=$optarg"
- ;;
- --inf*)
- infodir=$optarg
- diroptions="$diroptions --infodir=$optarg"
- ;;
- --libd*)
- libdir=$optarg
- diroptions="$diroptions --libdir=$optarg"
- ;;
- --libe*)
- libexecdir=$optarg
- diroptions="$diroptions --libexecdir=$optarg"
- ;;
- --lo*)
- localstatedir=$optarg
- diroptions="$diroptions --localstatedir=$optarg"
- ;;
- --ma*)
- mandir=$optarg
- diroptions="$diroptions --mandir=$optarg"
- ;;
- --nfp | --nf*)
- floating_point=no
- floating_pointoption="--nfp"
- ;;
- --norecursion | --no*)
- norecursion=yes
- ;;
- --ol*)
- oldincludedir=$optarg
- diroptions="$diroptions --oldincludedir=$optarg"
- ;;
- --prefix* | --pre*)
- prefix=$optarg
- prefixoption="--prefix=$optarg"
- ;;
- --program-prefix* | --program-p*)
- program_prefix=$optarg
- program_prefixoption="--program-prefix=$optarg"
- ;;
- --program-suffix* | --program-s*)
- program_suffix=$optarg
- program_suffixoption="--program-suffix=$optarg"
- ;;
- --program-transform-name* | --program-t*)
- # Double any backslashes or dollar signs in the argument
- program_transform_name="${program_transform_name} -e `echo ${optarg} | sed -e 's/\\\\/\\\\\\\\/g' -e 's/\\\$/$$/g'`"
- program_transform_nameoption="${program_transform_nameoption} --program-transform-name='$optarg'"
- ;;
- --rm)
- removing=--rm
- ;;
- --sb*)
- sbindir=$optarg
- diroptions="$diroptions --sbindir=$optarg"
- ;;
- --sh*)
- sharedstatedir=$optarg
- diroptions="$diroptions --sharedstatedir=$optarg"
- ;;
- --silent | --sil* | --quiet | --q*)
- redirect=">/dev/null"
- verbose=--silent
- ;;
- --site* | --sit*)
- site=$optarg
- site_option="--site=$optarg"
- ;;
- --srcdir*/ | --sr*/)
- # Remove trailing slashes. Otherwise, when the file name gets
- # bolted into an object file as debug info, it has two slashes
- # in it. Ordinarily this is ok, but emacs takes double slash
- # to mean "forget the first part".
- srcdir=`echo $optarg | sed -e 's:/$::'`
- ;;
- --srcdir* | --sr*)
- srcdir=$optarg
- ;;
- --sy*)
- sysconfdir=$optarg
- diroptions="$diroptions --sysconfdir=$optarg"
- ;;
- --target* | --ta*)
- case $target_alias in
- NOTARGET) target_alias=$optarg ;;
- *) echo '***' Can only configure for one target at a time. 1>&2
- fatal=yes
- ;;
- esac
- ;;
- --tmpdir* | --tm*)
- TMPDIR=$optarg
- tmpdiroption="--tmpdir=$optarg"
- ;;
- --verbose | --v | --verb*)
- redirect=
- verbose=--verbose
- ;;
- --version | --V | --vers*)
- echo "This is Cygnus Configure version" `echo ${version} | sed 's/[ $:]//g'`
- exit 0
- ;;
- --with-*)
- case "$option" in
- *=*) ;;
- *) optarg=yes ;;
- esac
-
- withopt=`echo ${option} | sed 's:^--::;s:=.*$::;s:-:_:g'`
- eval $withopt="\$optarg"
- withoptions="$withoptions $option"
- ;;
- --without-*)
- withopt=`echo ${option} | sed 's:^--::;s:out::;s:-:_:g'`
- eval $withopt=no
- withoutoptions="$withoutoptions $option"
- ;;
- --x) with_x=yes
- withoptions="$withoptions --with-x"
- ;;
- --x-i* | --x-l*) other_options="$other_options $orig_option"
- ;;
- --*)
- echo "configure: Unrecognized option: \"$orig_option\"; use --help for usage." >&2
- exit 1
- ;;
- *)
- case $undefs in
- NOUNDEFS) undefs=$option ;;
- *) echo '***' Can only configure for one host and one target at a time. 1>&2
- fatal=yes
- ;;
- esac
- ;;
- esac
- done
-
- # process host and target
-
- # Do some error checking and defaulting for the host and target type.
- # The inputs are:
- # configure --host=HOST --target=TARGET UNDEFS
- #
- # The rules are:
- # 1. You aren't allowed to specify --host, --target, and undefs at the
- # same time.
- # 2. Host defaults to undefs.
- # 3. If undefs is not specified, then host defaults to the current host,
- # as determined by config.guess.
- # 4. Target defaults to undefs.
- # 5. If undefs is not specified, then target defaults to host.
-
- case "${fatal}" in
- "")
- # Make sure that host, target & undefs aren't all specified at the
- # same time.
- case $host_alias---$target_alias---$undefs in
- NOHOST---*---* | *---NOTARGET---* | *---*---NOUNDEFS)
- ;;
- *) echo '***' Can only configure for one host and one target at a time. 1>&2
- fatal=yes
- break 2
- ;;
- esac
-
- # Now, do defaulting for host.
- case $host_alias in
- NOHOST)
- case $undefs in
- NOUNDEFS)
- # Neither --host option nor undefs were present.
- # Call config.guess.
- guesssys=`echo ${progname} | sed 's/configure$/config.guess/'`
- if host_alias=`${config_shell} ${guesssys}`
- then
- # If the string we are going to use for
- # the target is a prefix of the string
- # we just guessed for the host, then
- # assume we are running native, and force
- # the same string for both target and host.
- case $target_alias in
- NOTARGET) ;;
- *)
- if expr $host_alias : $target_alias >/dev/null
- then
- host_alias=$target_alias
- fi
- ;;
- esac
- echo "Configuring for a ${host_alias} host."
- arguments="--host=$host_alias $arguments"
- else
- echo 'Config.guess failed to determine the host type. You need to specify one.' 1>&2
- fatal=yes
- fi
- ;;
- *)
- host_alias=$undefs
- arguments="--host=$host_alias $arguments"
- undefs=NOUNDEFS
- ;;
- esac
- esac
-
- # Do defaulting for target. If --target option isn't present, default
- # to undefs. If undefs isn't present, default to host.
- case $target_alias in
- NOTARGET)
- case $undefs in
- NOUNDEFS)
- target_alias=$host_alias
- ;;
- *)
- target_alias=$undefs
- arguments="--target=$target_alias $arguments"
- ;;
- esac
- esac
- ;;
- *) ;;
- esac
-
- if [ -n "${fatal}" -o "${host_alias}" = "help" ] ; then
- exec 1>&2
- echo Usage: configure [OPTIONS] [HOST]
- echo
- echo Options: [defaults in brackets]
- echo ' --prefix=MYDIR install into MYDIR [/usr/local]'
- echo ' --exec-prefix=MYDIR install host-dependent files into MYDIR [/usr/local]'
- echo ' --help print this message [normal config]'
- echo ' --build=BUILD configure for building on BUILD [BUILD=HOST]'
- echo ' --host=HOST configure for HOST [determined via config.guess]'
- echo ' --norecursion configure this directory only [recurse]'
- echo ' --program-prefix=FOO prepend FOO to installed program names [""]'
- echo ' --program-suffix=FOO append FOO to installed program names [""]'
- echo ' --program-transform-name=P transform installed names by sed pattern P [""]'
- echo ' --site=SITE configure with site-specific makefile for SITE'
- echo ' --srcdir=DIR find the sources in DIR [. or ..]'
- echo ' --target=TARGET configure for TARGET [TARGET=HOST]'
- echo ' --tmpdir=TMPDIR create temporary files in TMPDIR [/tmp]'
- echo ' --nfp configure for software floating point [hard float]'
- echo ' --with-FOO, --with-FOO=BAR package FOO is available (parameter BAR)'
- echo ' --without-FOO package FOO is NOT available'
- echo ' --enable-FOO, --enable-FOO=BAR include feature FOO (parameter BAR)'
- echo ' --disable-FOO do not include feature FOO'
- echo
- echo 'Where HOST and TARGET are something like "sparc-sunos", "mips-sgi-irix5", etc.'
- echo
- if [ -r config.status ] ; then
- cat config.status
- fi
-
- exit 1
- fi
-
- configsub=`echo ${progname} | sed 's/configure$/config.sub/'`
- moveifchange=`echo ${progname} | sed 's/configure$/move-if-change/'`
- ## the sed command below emulates the dirname command
- topsrcdir=`cd \`echo ${progname} | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'\`; ${PWDCMD-pwd}`
-
-
- # this is a hack. sun4 must always be a valid host alias or this will fail.
- if ${config_shell} ${configsub} sun4 >/dev/null 2>&1 ; then
- true
- else
- echo '***' cannot find config.sub. 1>&2
- exit 1
- fi
-
- touch config.junk
- if ${config_shell} ${moveifchange} config.junk config.trash ; then
- true
- else
- echo '***' cannot find move-if-change. 1>&2
- exit 1
- fi
- rm -f config.junk config.trash
-
- case "${srcdir}" in
- "")
- if [ -r configure.in ] ; then
- srcdir=.
- else
- if [ -r ${progname}.in ] ; then
- srcdir=`echo ${progname} | sed 's:/configure$::'`
- else
- echo '***' "Can't find configure.in. Try using --srcdir=some_dir" 1>&2
- exit 1
- fi
- fi
- ;;
- *)
- # Set srcdir to "." if that's what it is.
- # This is important for multilib support.
- if [ ! -d ${srcdir} ] ; then
- echo "Invalid source directory ${srcdir}" >&2
- exit 1
- fi
- pwd=`${PWDCMD-pwd}`
- srcpwd=`cd ${srcdir} ; ${PWDCMD-pwd}`
- if [ "${pwd}" = "${srcpwd}" ] ; then
- srcdir=.
- fi
- esac
-
- ### warn about some conflicting configurations.
-
- case "${srcdir}" in
- ".") ;;
- *)
- if [ -f ${srcdir}/config.status ] ; then
- echo '***' Cannot configure here in \"${PWD=`${PWDCMD-pwd}`}\" when \"${srcdir}\" is currently configured. 1>&2
- exit 1
- fi
- esac
-
- # default exec_prefix
- case "${exec_prefixoption}" in
- "") exec_prefix="\$(prefix)" ;;
- *) ;;
- esac
-
- # Define the trigger file to make sure configure will re-run whenever
- # the gcc version number changes.
- if [ "${with_gcc_version_trigger+set}" = set ]; then
- gcc_version_trigger="$with_gcc_version_trigger"
- gcc_version=`grep version_string ${with_gcc_version_trigger} | sed -e 's/.*\"\([^ \"]*\)[ \"].*/\1/'`
- else
- # If gcc's sources are available, define the trigger file.
- if [ -f ${topsrcdir}/gcc/version.c ] ; then
- gcc_version_trigger=${topsrcdir}/gcc/version.c
- gcc_version=`grep version_string ${gcc_version_trigger} | sed -e 's/.*\"\([^ \"]*\)[ \"].*/\1/'`
- case "$arguments" in
- *--with-gcc-version-trigger=$gcc_version_trigger* )
- ;;
- * )
- # Make sure configure.in knows about this.
- arguments="--with-gcc-version-trigger=$gcc_version_trigger $arguments"
- ;;
- esac
- withoptions="--with-gcc-version-trigger=$gcc_version_trigger $withoptions"
- fi
- fi
-
- ### break up ${srcdir}/configure.in.
- case "`grep '^# per\-host:' ${srcdir}/configure.in`" in
- "")
- echo '***' ${srcdir}/configure.in has no \"per-host:\" line. 1>&2
- # Check for a directory that's been converted to use autoconf since
- # it was last configured.
- if grep AC_OUTPUT ${srcdir}/configure.in >/dev/null ; then
- echo '***' Hmm, looks like this directory has been autoconfiscated. 1>&2
- if [ -r ${srcdir}/configure ] ; then
- echo '***' Running the local configure script. 1>&2
- case "${cache_file}" in
- "") cache_file_option= ;;
- *) cache_file_option="--cache-file=${cache_file}" ;;
- esac
- srcdiroption="--srcdir=${srcdir}"
- case "${build_alias}" in
- "") buildopt= ;;
- *) buildopt="--build=${build_alias}" ;;
- esac
- eval exec ${config_shell} ${srcdir}/configure ${verbose} \
- ${buildopt} --host=${host_alias} --target=${target_alias} \
- ${prefixoption} ${tmpdiroption} ${exec_prefixoption} \
- ${srcdiroption} ${diroptions} \
- ${program_prefixoption} ${program_suffixoption} \
- ${program_transform_nameoption} ${site_option} \
- ${withoptions} ${withoutoptions} \
- ${enableoptions} ${disableoptions} ${floating_pointoption} \
- ${cache_file_option} ${removing} ${other_options} ${redirect}
- else
- echo '***' There is no configure script present though. 1>&2
- fi
- fi
- exit 1
- ;;
- *) ;;
- esac
-
- case "`grep '^# per\-target:' ${srcdir}/configure.in`" in
- "")
- echo '***' ${srcdir}/configure.in has no \"per-target:\" line. 1>&2
- exit 1
- ;;
- *) ;;
- esac
-
- case "${TMPDIR}" in
- "") TMPDIR=/tmp ; export TMPDIR ;;
- *) ;;
- esac
-
- # keep this filename short for &%*%$*# 14 char file names and 8+3 file names
- tmpdir=${TMPDIR}/cNf$$
- mkdir ${tmpdir} || exit 1
- tmpfile=${tmpdir}/cNf$$
- # Note that under many versions of sh a trap handler for 0 will *override* any
- # exit status you explicitly specify! At this point, the only non-error exit
- # is at the end of the script; these actions are duplicated there, minus
- # the "exit 1". Don't use "exit 0" anywhere after this without resetting the
- # trap handler, or you'll lose.
- trap "rm -rf Makefile.tem ${tmpdir}; exit 1" 0 1 2 15
-
- # split ${srcdir}/configure.in into common, per-host, per-target,
- # and post-target parts. Post-target is optional.
- sed -e '/^# per\-host:/,$d' ${srcdir}/configure.in > ${tmpfile}.com
- sed -e '1,/^# per\-host:/d' -e '/^# per\-target:/,$d' ${srcdir}/configure.in > ${tmpfile}.hst
- if grep '^# post-target:' ${srcdir}/configure.in >/dev/null ; then
- sed -e '1,/^# per\-target:/d' -e '/^# post\-target:/,$d' ${srcdir}/configure.in > ${tmpfile}.tgt
- sed -e '1,/^# post\-target:/d' ${srcdir}/configure.in > ${tmpfile}.pos
- else
- sed -e '1,/^# per\-target:/d' ${srcdir}/configure.in > ${tmpfile}.tgt
- echo >${tmpfile}.pos
- fi
-
- ### do common part of configure.in
-
- # If the language specific compiler does not exist, but the "gcc" directory does,
- # we will skip this directory; in this case the sub-directory's common part
- # of configure.in will create a small shell script "skip-this-dir" containing
- # commands to completely clean up any temporary or created files.
-
- . ${tmpfile}.com
-
- if test -f skip-this-dir; then
- # Perform the same cleanup as the trap handler, minus the "exit 1" of course,
- # and reset the trap handler.
- trap 0
- rm -rf Makefile* ${tmpdir}
- # Execute the final clean-up actions
- ${config_shell} skip-this-dir
- # and stop configuring this directory.
- exit 0
- fi
-
- # some sanity checks on configure.in
- case "${srctrigger}" in
- "")
- echo '***' srctrigger not set in ${PWD=`${PWDCMD-pwd}`}/configure.in. 1>&2
- exit 1
- ;;
- *) ;;
- esac
-
- case "${build_alias}" in
- "")
- if result=`${config_shell} ${configsub} ${host_alias}` ; then
- build_cpu=`echo $result | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
- build_vendor=`echo $result | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
- build_os=`echo $result | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
- build=${build_cpu}-${build_vendor}-${build_os}
- build_alias=${host_alias}
- fi
- ;;
- *)
- if result=`${config_shell} ${configsub} ${build_alias}` ; then
- buildopt="--build=${build_alias}"
- build_cpu=`echo $result | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
- build_vendor=`echo $result | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
- build_os=`echo $result | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
- build=${build_cpu}-${build_vendor}-${build_os}
- else
- echo "Unrecognized build system name ${build_alias}." 1>&2
- exit 1
- fi
- ;;
- esac
-
- if result=`${config_shell} ${configsub} ${host_alias}` ; then
- true
- else
- echo "Unrecognized host system name ${host_alias}." 1>&2
- exit 1
- fi
- host_cpu=`echo $result | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
- host_vendor=`echo $result | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
- host_os=`echo $result | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
- host=${host_cpu}-${host_vendor}-${host_os}
-
- . ${tmpfile}.hst
-
- if result=`${config_shell} ${configsub} ${target_alias}` ; then
- true
- else
- echo "Unrecognized target system name ${target_alias}." 1>&2
- exit 1
- fi
- target_cpu=`echo $result | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
- target_vendor=`echo $result | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
- target_os=`echo $result | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
- target=${target_cpu}-${target_vendor}-${target_os}
-
- . ${tmpfile}.tgt
-
- # Find the source files, if location was not specified.
- case "${srcdir}" in
- "")
- srcdirdefaulted=1
- srcdir=.
- if [ ! -r ${srctrigger} ] ; then
- srcdir=..
- fi
- ;;
- *) ;;
- esac
-
- if [ ! -r ${srcdir}/${srctrigger} ] ; then
- case "${srcdirdefaulted}" in
- "") echo '***' "${progname}: Can't find ${srcname} sources in ${PWD=`${PWDCMD-pwd}`}/${srcdir}" 1>&2 ;;
- *) echo '***' "${progname}: Can't find ${srcname} sources in ${PWD=`${PWDCMD-pwd}`}/. or ${PWD=`${PWDCMD-pwd}`}/.." 1>&2 ;;
- esac
-
- echo '***' \(At least ${srctrigger} is missing.\) 1>&2
- exit 1
- fi
-
- # Some systems (e.g., one of the i386-aix systems the gas testers are
- # using) don't handle "\$" correctly, so don't use it here.
- tooldir='$(exec_prefix)'/${target_alias}
-
- if [ "${host_alias}" != "${target_alias}" ] ; then
- if [ "${program_prefixoption}" = "" ] ; then
- if [ "${program_suffixoption}" = "" ] ; then
- if [ "${program_transform_nameoption}" = "" ] ; then
- program_prefix=${target_alias}- ;
- fi
- fi
- fi
- fi
-
- # Merge program_prefix and program_suffix onto program_transform_name.
- # (program_suffix used to use $, but it's hard to preserve $ through both
- # make and sh.)
- if [ "${program_suffix}" != "" ] ; then
- program_transform_name="-e s,\\\\(.*\\\\),\\\\1${program_suffix}, ${program_transform_name}"
- fi
-
- if [ "${program_prefix}" != "" ] ; then
- program_transform_name="-e s,^,${program_prefix}, ${program_transform_name}"
- fi
-
- # If CC and CXX are not set in the environment, and the Makefile
- # exists, try to extract them from it. This is to handle running
- # ./config.status by hand.
- if [ -z "${CC}" ] && [ -r Makefile ]; then
- sed -n -e ':loop
- /\\$/ N
- s/\\\n//g
- t loop
- /^CC[ ]*=/ s/CC[ ]*=[ ]*\(.*\)/\1/p' < Makefile > Makefile.cc
- CC=`tail -1 Makefile.cc`
- rm -f Makefile.cc
- fi
-
- if [ -z "${CFLAGS}" ] && [ -r Makefile ]; then
- sed -n -e ':loop
- /\\$/ N
- s/\\\n//g
- t loop
- /^CFLAGS[ ]*=/ s/CFLAGS[ ]*=[ ]*\(.*\)/\1/p' < Makefile > Makefile.cc
- CFLAGS=`tail -1 Makefile.cc`
- rm -f Makefile.cc
- fi
-
- if [ -z "${CXX}" ] && [ -r Makefile ]; then
- sed -n -e ':loop
- /\\$/ N
- s/\\\n//g
- t loop
- /^CXX[ ]*=/ s/CXX[ ]*=[ ]*\(.*\)/\1/p' < Makefile > Makefile.cc
- CXX=`tail -1 Makefile.cc`
- rm -f Makefile.cc
- fi
-
- if [ -z "${CXXFLAGS}" ] && [ -r Makefile ]; then
- sed -n -e ':loop
- /\\$/ N
- s/\\\n//g
- t loop
- /^CXXFLAGS[ ]*=/ s/CXXFLAGS[ ]*=[ ]*\(.*\)/\1/p' < Makefile > Makefile.cc
- CXXFLAGS=`tail -1 Makefile.cc`
- rm -f Makefile.cc
- fi
-
- # Generate a default definition for YACC. This is used if the makefile can't
- # locate bison or byacc in objdir.
-
- for prog in 'bison -y' byacc yacc
- do
- set dummy $prog; tmp=$2
- IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:"
- for dir in $PATH; do
- test -z "$dir" && dir=.
- if test -f $dir/$tmp; then
- DEFAULT_YACC="$prog"
- break
- fi
- done
- IFS="$save_ifs"
-
- test -n "$DEFAULT_YACC" && break
- done
-
- # Generate a default definition for M4. This is used if the makefile can't
- # locate m4 in objdir.
-
- for prog in gm4 gnum4 m4
- do
- set dummy $prog; tmp=$2
- IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:"
- for dir in $PATH; do
- test -z "$dir" && dir=.
- if test -f $dir/$tmp; then
- DEFAULT_M4="$prog"
- break
- fi
- done
- IFS="$save_ifs"
-
- test -n "$DEFAULT_M4" && break
- done
-
- # Generate a default definition for LEX. This is used if the makefile can't
- # locate flex in objdir.
-
- for prog in flex lex
- do
- set dummy $prog; tmp=$2
- IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:"
- for dir in $PATH; do
- test -z "$dir" && dir=.
- if test -f $dir/$tmp; then
- DEFAULT_LEX="$prog"
- break
- fi
- done
- IFS="$save_ifs"
-
- test -n "$DEFAULT_LEX" && break
- done
-
- if [ "${build}" != "${host}" ]; then
- # If we are doing a Canadian Cross, in which the host and build systems
- # are not the same, we set reasonable default values for the tools.
-
- tools="AR AR_FOR_TARGET AS AS_FOR_TARGET BISON CC_FOR_BUILD"
- tools="${tools} CC_FOR_TARGET CXX_FOR_TARGET GCJ_FOR_TARGET"
- tools="${tools} DLLTOOL DLLTOOL_FOR_TARGET GCC_FOR_TARGET BUILD_PREFIX"
- tools="${tools} BUILD_PREFIX_1 LD LD_FOR_TARGET LEX MAKEINFO NM"
- tools="${tools} NM_FOR_TARGET RANLIB RANLIB_FOR_TARGET"
- tools="${tools} WINDRES WINDRES_FOR_TARGET YACC"
- tools="${tools} OBJCOPY OBJDUMP"
-
- for var in ${tools}; do
- if eval [ -z \"\$${var}\" ] && [ -r Makefile ]; then
- sed -n -e ':loop
- /\\$/ N
- s/\\\n//g
- t loop
- /^'"${var}"'[ ]*=/ s/'"${var}"'[ ]*=[ ]*\(.*\)/\1/p' \
- < Makefile > Makefile.v
- t=`tail -1 Makefile.v`
- if [ -n "${t}" ]; then
- eval "${var}=\${t}"
- fi
- rm -f Makefile.v
- fi
- done
-
- AR=${AR-${host_alias}-ar}
- AR_FOR_TARGET=${AR_FOR_TARGET-${target_alias}-ar}
- AS=${AS-${host_alias}-as}
- AS_FOR_TARGET=${AS_FOR_TARGET-${target_alias}-as}
- BISON=${BISON-bison}
- CC=${CC-${host_alias}-gcc}
- CFLAGS=${CFLAGS-"-g -O2"}
- CXX=${CXX-${host_alias}-c++}
- CXXFLAGS=${CXXFLAGS-"-g -O2"}
- CC_FOR_BUILD=${CC_FOR_BUILD-gcc}
- CC_FOR_TARGET=${CC_FOR_TARGET-${target_alias}-gcc}
- CXX_FOR_TARGET=${CXX_FOR_TARGET-${target_alias}-c++}
- GCJ_FOR_TARGET=${GCJ_FOR_TARGET-${target_alias}-gcj}
- DLLTOOL=${DLLTOOL-${host_alias}-dlltool}
- DLLTOOL_FOR_TARGET=${DLLTOOL_FOR_TARGET-${target_alias}-dlltool}
- GCC_FOR_TARGET=${GCC_FOR_TARGET-${CC_FOR_TARGET-${target_alias}-gcc}}
- BUILD_PREFIX=${build_alias}-
- BUILD_PREFIX_1=${build_alias}-
- LD=${LD-${host_alias}-ld}
- LD_FOR_TARGET=${LD_FOR_TARGET-${target_alias}-ld}
- MAKEINFO=${MAKEINFO-makeinfo}
- NM=${NM-${host_alias}-nm}
- NM_FOR_TARGET=${NM_FOR_TARGET-${target_alias}-nm}
- RANLIB=${RANLIB-${host_alias}-ranlib}
- RANLIB_FOR_TARGET=${RANLIB_FOR_TARGET-${target_alias}-ranlib}
- WINDRES=${WINDRES-${host_alias}-windres}
- WINDRES_FOR_TARGET=${WINDRES_FOR_TARGET-${target_alias}-windres}
- OBJCOPY=${OBJCOPY-${host_alias}-objcopy}
- OBJDUMP=${OBJDUMP-${host_alias}-objdump}
-
- if [ -z "${YACC}" ]; then
- IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:"
- for dir in $PATH; do
- test -z "$dir" && dir=.
- if test -f $dir/bison; then
- YACC="bison -y"
- break
- fi
- if test -f $dir/byacc; then
- YACC=byacc
- break
- fi
- if test -f $dir/yacc; then
- YACC=yacc
- break
- fi
- done
- IFS="$save_ifs"
- if [ -z "${YACC}" ]; then
- YACC="bison -y"
- fi
- fi
-
- if [ -z "${LEX}" ]; then
- IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:"
- for dir in $PATH; do
- test -z "$dir" && dir=.
- if test -f $dir/flex; then
- LEX=flex
- break
- fi
- if test -f $dir/lex; then
- LEX=lex
- break
- fi
- done
- IFS="$save_ifs"
- LEX=${LEX-flex}
- fi
-
- # Export variables which autoconf might try to set.
- export AS
- export AR
- export CC_FOR_BUILD
- export DLLTOOL
- export LD
- export NM
- export RANLIB
- export WINDRES
- export OBJCOPY
- export OBJDUMP
- else
- # If CC is still not set, try to get gcc.
- if [ -z "${CC}" ]; then
- IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:"
- for dir in $PATH; do
- test -z "$dir" && dir=.
- if test -f $dir/gcc; then
- CC="gcc"
- echo 'void f(){}' > conftest.c
- if test -z "`${CC} -g -c conftest.c 2>&1`"; then
- CFLAGS=${CFLAGS-"-g -O2"}
- CXXFLAGS=${CXXFLAGS-"-g -O2"}
- else
- CFLAGS=${CFLAGS-"-O2"}
- CXXFLAGS=${CXXFLAGS-"-O2"}
- fi
- rm -f conftest*
- break
- fi
- done
- IFS="$save_ifs"
- CC=${CC-cc}
- else
- if test -z "${CFLAGS}"; then
- # Here CC is set but CFLAGS is not. Use a quick hack to use -O2 if CC
- # is set to a version of gcc.
- case "${CC}" in
- *gcc)
- echo 'void f(){}' > conftest.c
- if test -z "`${CC} -g -c conftest.c 2>&1`"; then
- CFLAGS=${CFLAGS-"-g -O2"}
- CXXFLAGS=${CXXFLAGS-"-g -O2"}
- else
- CFLAGS=${CFLAGS-"-O2"}
- CXXFLAGS=${CXXFLAGS-"-O2"}
- fi
- rm -f conftest*
- ;;
- esac
- fi
- fi
-
- CXX=${CXX-"c++"}
- CFLAGS=${CFLAGS-"-g"}
- CXXFLAGS=${CXXFLAGS-"-g -O2"}
- fi
-
- export CC
- export CXX
- export CFLAGS
- export CXXFLAGS
-
- all_build_modules=
- if test x"${build_alias}" != x"${host_alias}"
- then
- all_build_modules='$(ALL_BUILD_MODULES_LIST)'
- fi
-
- for subdir in . ${subdirs} ; do
-
- # ${subdir} is relative path from . to the directory we're currently
- # configuring.
- # ${invsubdir} is inverse of ${subdir), *with* trailing /, if needed.
- invsubdir=`echo ${subdir}/ | sed -e 's|\./||g' -e 's|[^/]*/|../|g'`
-
- ### figure out what to do with srcdir
- case "${srcdir}" in
- ".") # no -srcdir option. We're building in place.
- makesrcdir=. ;;
- /* | [A-Za-z]:[\\/]* ) # absolute path
- makesrcdir=`echo ${srcdir}/${subdir} | sed -e 's|/\.$||'`
- ;;
- *) # otherwise relative
- case "${subdir}" in
- .) makesrcdir=${srcdir} ;;
- *) makesrcdir=${invsubdir}${srcdir}/${subdir} ;;
- esac
- ;;
- esac
-
- if [ "${subdir}/" != "./" ] ; then
- Makefile=${subdir}/Makefile
- fi
-
- if [ ! -d ${subdir} ] ; then
- if mkdir ${subdir} ; then
- true
- else
- echo '***' "${progname}: could not make ${PWD=`${PWDCMD-pwd}`}/${subdir}" 1>&2
- exit 1
- fi
- fi
-
- case "${removing}" in
- "")
- case "${subdir}" in
- .) ;;
- *) eval echo Building in ${subdir} ${redirect} ;;
- esac
-
- # FIXME Should this be done recursively ??? (Useful for e.g. gdbtest)
- # Set up the list of links to be made.
- # ${links} is the list of link names, and ${files} is the list of names to link to.
-
- # Make the links.
- configlinks="${links}"
- if [ -r ${subdir}/config.status ] ; then
- mv -f ${subdir}/config.status ${subdir}/config.back
- fi
- while [ -n "${files}" ] ; do
- # set file to car of files, files to cdr of files
- set ${files}; file=$1; shift; files=$*
- set ${links}; link=$1; shift; links=$*
-
- if [ ! -r ${srcdir}/${file} ] ; then
- if [ ! -r ${file} ] ; then
-
- echo '***' "${progname}: cannot create a link \"${link}\"," 1>&2
- echo '***' "since the file \"${srcdir}/${file}\" does not exist." 1>&2
- exit 1
- else
- srcfile=${file}
- fi
- else
- srcfile=${srcdir}/${file}
- fi
-
- ${remove} -f ${link}
- # Make a symlink if possible, otherwise try a hard link
- if ${symbolic_link} ${srcfile} ${link} >/dev/null 2>&1 ; then
- true
- else
- # We need to re-remove the file because Lynx leaves a
- # very strange directory there when it fails an NFS symlink.
- ${remove} -r -f ${link}
- ${hard_link} ${srcfile} ${link}
- fi
- if [ ! -r ${link} ] ; then
- echo '***' "${progname}: unable to link \"${link}\" to \"${srcfile}\"." 1>&2
- exit 1
- fi
-
- echo "Linked \"${link}\" to \"${srcfile}\"."
- done
-
- # Create a .gdbinit file which runs the one in srcdir
- # and tells GDB to look there for source files.
-
- if [ -r ${srcdir}/${subdir}/.gdbinit ] ; then
- case ${srcdir} in
- .) ;;
- *) cat > ${subdir}/.gdbinit <<EOF
- # ${NO_EDIT}
- dir ${makesrcdir}
- dir .
- source ${makesrcdir}/.gdbinit
- EOF
- ;;
- esac
- fi
-
- # Install a makefile, and make it set VPATH
- # if necessary so that the sources are found.
- # Also change its value of srcdir.
- # NOTE: Makefile generation constitutes the majority of the time in configure. Hence, this section has
- # been somewhat optimized and is perhaps a bit twisty.
-
- # code is order so as to try to sed the smallest input files we know.
- # so do these separately because I don't trust the order of sed -e expressions.
-
- # the five makefile fragments MUST end up in the resulting Makefile in this order:
- # package macros, target, host, site, and package rules.
-
- if [ -f ${srcdir}/${subdir}/${Makefile_in} ] ; then
-
- # Conditionalize the makefile for this package from "Makefile.in" (or whatever it's called) into Makefile.tem.
- rm -f ${subdir}/${Makefile}.tem
- case "${package_makefile_rules_frag}" in
- "") cp ${srcdir}/${subdir}/${Makefile_in} ${subdir}/Makefile.tem ;;
- *)
- if [ ! -f ${package_makefile_rules_frag} ] ; then
- package_makefile_rules_frag=${srcdir}/${package_makefile_rules_frag}
- fi
- if [ -f ${package_makefile_rules_frag} ] ; then
- sed -e "/^####/ r ${package_makefile_rules_frag}" ${srcdir}/${subdir}/${Makefile_in} > ${Makefile}.tem
- else
- echo '***' Expected package makefile rules fragment \"${package_makefile_rules_frag}\" 1>&2
- echo '***' is missing in ${PWD=`${PWDCMD-pwd}`}. 1>&2
- cp ${srcdir}/${subdir}/${Makefile_in} ${subdir}/Makefile.tem
- fi
- esac
- # working copy now in ${Makefile}.tem
-
- # Conditionalize for this site.
- rm -f ${Makefile}
- case "${site}" in
- "") mv ${subdir}/Makefile.tem ${Makefile} ;;
- *)
- site_makefile_frag=${srcdir}/config/ms-${site}
-
- if [ -f ${site_makefile_frag} ] ; then
- sed -e "/^####/ r ${site_makefile_frag}" ${subdir}/Makefile.tem \
- > ${Makefile}
- else
- mv ${subdir}/Makefile.tem ${Makefile}
- site_makefile_frag=
- fi
- ;;
- esac
- # working copy now in ${Makefile}
-
- # Conditionalize the makefile for this host.
- rm -f ${subdir}/Makefile.tem
- case "${host_makefile_frag}" in
- "") mv ${Makefile} ${subdir}/Makefile.tem ;;
- *)
- if [ ! -f ${host_makefile_frag} ] ; then
- host_makefile_frag=${srcdir}/${host_makefile_frag}
- fi
- if [ -f ${host_makefile_frag} ] ; then
- sed -e "/^####/ r ${host_makefile_frag}" ${Makefile} > ${subdir}/Makefile.tem
- else
- echo '***' Expected host makefile fragment \"${host_makefile_frag}\" 1>&2
- echo '***' is missing in ${PWD=`${PWDCMD-pwd}`}. 1>&2
- mv ${Makefile} ${subdir}/Makefile.tem
- fi
- esac
- # working copy now in ${subdir)/Makefile.tem
-
- # Conditionalize the makefile for this target.
- rm -f ${Makefile}
- case "${target_makefile_frag}" in
- "") mv ${subdir}/Makefile.tem ${Makefile} ;;
- *)
- if [ ! -f ${target_makefile_frag} ] ; then
- target_makefile_frag=${srcdir}/${target_makefile_frag}
- fi
- if [ -f ${target_makefile_frag} ] ; then
- sed -e "/^####/ r ${target_makefile_frag}" ${subdir}/Makefile.tem > ${Makefile}
- else
- mv ${subdir}/Makefile.tem ${Makefile}
- target_makefile_frag=
- fi
- ;;
- esac
- # working copy now in ${Makefile}
-
- # Emit the default values of this package's macros.
- rm -f ${subdir}/Makefile.tem
- case "${package_makefile_frag}" in
- "") mv ${Makefile} ${subdir}/Makefile.tem ;;
- *)
- if [ ! -f ${package_makefile_frag} ] ; then
- package_makefile_frag=${srcdir}/${package_makefile_frag}
- fi
- if [ -f ${package_makefile_frag} ] ; then
- sed -e "/^####/ r ${package_makefile_frag}" ${Makefile} > ${subdir}/Makefile.tem
- else
- echo '***' Expected package makefile fragment \"${package_makefile_rules_frag}\" 1>&2
- echo '***' is missing in ${PWD=`${PWDCMD-pwd}`}. 1>&2
- mv ${Makefile} ${subdir}/Makefile.tem
- fi
- esac
- # real copy now in ${subdir}/Makefile.tem
-
- # prepend warning about editing, and a bunch of variables.
- rm -f ${Makefile}
- cat > ${Makefile} <<EOF
- # ${NO_EDIT}
- VPATH = ${makesrcdir}
- links = ${configlinks}
- host_alias = ${host_alias}
- host_cpu = ${host_cpu}
- host_vendor = ${host_vendor}
- host_os = ${host_os}
- host_canonical = ${host_cpu}-${host_vendor}-${host_os}
- target_alias = ${target_alias}
- target_cpu = ${target_cpu}
- target_vendor = ${target_vendor}
- target_os = ${target_os}
- target_canonical = ${target_cpu}-${target_vendor}-${target_os}
- EOF
- case "${build}" in
- "") ;;
- *) cat >> ${Makefile} << EOF
- build_alias = ${build_alias}
- build_cpu = ${build_cpu}
- build_vendor = ${build_vendor}
- build_os = ${build_os}
- build_canonical = ${build_cpu}-${build_vendor}-${build_os}
- EOF
- esac
-
- case "${package_makefile_frag}" in
- "") ;;
- /* | [A-Za-z]:[\\/]* ) echo package_makefile_frag = ${package_makefile_frag} >>${Makefile} ;;
- *) echo package_makefile_frag = ${invsubdir}${package_makefile_frag} >>${Makefile} ;;
- esac
-
- case "${target_makefile_frag}" in
- "") ;;
- /* | [A-Za-z]:[\\/]* ) echo target_makefile_frag = ${target_makefile_frag} >>${Makefile} ;;
- *) echo target_makefile_frag = ${invsubdir}${target_makefile_frag} >>${Makefile} ;;
- esac
-
- case "${host_makefile_frag}" in
- "") ;;
- /* | [A-Za-z]:[\\/]* ) echo host_makefile_frag = ${host_makefile_frag} >>${Makefile} ;;
- *) echo host_makefile_frag = ${invsubdir}${host_makefile_frag} >>${Makefile} ;;
- esac
-
- if [ "${site_makefile_frag}" != "" ] ; then
- echo site_makefile_frag = ${invsubdir}${site_makefile_frag} >>${Makefile}
- fi
-
- echo enable_shared = ${enable_shared} >> ${Makefile}
- echo enable_threads = ${enable_threads} >> ${Makefile}
- # record if we want to rumtime library stuff installed in libsubdir.
- if test -z "${enable_version_specific_runtime_libs}"; then
- echo enable_version_specific_runtime_libs = no >> ${Makefile}
- else
- echo enable_version_specific_runtime_libs = ${enable_version_specific_runtime_libs} >> ${Makefile}
- fi
-
- # Emit a macro which describes the file containing gcc's
- # version number.
- echo gcc_version_trigger = ${gcc_version_trigger} >> ${Makefile}
- # And emit a macro defining gcc's version number.
- echo gcc_version = ${gcc_version} >> ${Makefile}
-
- # reset prefix, exec_prefix, srcdir, SUBDIRS, NONSUBDIRS,
- # remove any form feeds.
- if [ -z "${subdirs}" ]; then
- rm -f ${subdir}/Makefile.tm2
- sedtemp=sed.$$
- cat >$sedtemp <<EOF
- s:^SUBDIRS[ ]*=.*$:SUBDIRS = ${configdirs}:
- s:^NONSUBDIRS[ ]*=.*$:NONSUBDIRS = ${noconfigdirs}:
- EOF
- sed -f $sedtemp \
- ${subdir}/Makefile.tem > ${subdir}/Makefile.tm2
- rm -f $sedtemp
- rm -f ${subdir}/Makefile.tem
- mv ${subdir}/Makefile.tm2 ${subdir}/Makefile.tem
- fi
- sed -e "s|^prefix[ ]*=.*$|prefix = ${prefix}|" \
- -e "s|^exec_prefix[ ]*=.*$|exec_prefix = ${exec_prefix}|" \
- -e "s|^bindir[ ]*=.*$|bindir = ${bindir}|" \
- -e "s|^sbindir[ ]*=.*$|sbindir = ${sbindir}|" \
- -e "s|^libexecdir[ ]*=.*$|libexecdir = ${libexecdir}|" \
- -e "s|^datadir[ ]*=.*$|datadir = ${datadir}|" \
- -e "s|^sysconfdir[ ]*=.*$|sysconfdir = ${sysconfdir}|" \
- -e "s|^sharedstatedir[ ]*=.*$|sharedstatedir = ${sharedstatedir}|" \
- -e "s|^localstatedir[ ]*=.*$|localstatedir = ${localstatedir}|" \
- -e "s|^libdir[ ]*=.*$|libdir = ${libdir}|" \
- -e "s|^includedir[ ]*=.*$|includedir = ${includedir}|" \
- -e "s|^oldincludedir[ ]*=.*$|oldincludedir = ${oldincludedir}|" \
- -e "s|^infodir[ ]*=.*$|infodir = ${infodir}|" \
- -e "s|^mandir[ ]*=.*$|mandir = ${mandir}|" \
- -e "s|^ALL_BUILD_MODULES =.*|ALL_BUILD_MODULES =${all_build_modules}|" \
- -e "/^CC[ ]*=/{
- :loop1
- /\\\\$/ N
- s/\\\\\\n//g
- t loop1
- s%^CC[ ]*=.*$%CC = ${CC}%
- }" \
- -e "/^CXX[ ]*=/{
- :loop2
- /\\\\$/ N
- s/\\\\\\n//g
- t loop2
- s%^CXX[ ]*=.*$%CXX = ${CXX}%
- }" \
- -e "/^CFLAGS[ ]*=/{
- :loop3
- /\\\\$/ N
- s/\\\\\\n//g
- t loop3
- s%^CFLAGS[ ]*=.*$%CFLAGS = ${CFLAGS}%
- }" \
- -e "/^CXXFLAGS[ ]*=/{
- :loop4
- /\\\\$/ N
- s/\\\\\\n//g
- t loop4
- s%^CXXFLAGS[ ]*=.*$%CXXFLAGS = ${CXXFLAGS}%
- }" \
- -e "s|^SHELL[ ]*=.*$|SHELL = ${config_shell}|" \
- -e "s|^srcdir[ ]*=.*$|srcdir = ${makesrcdir}|" \
- -e "s/ //" \
- -e "s:^program_prefix[ ]*=.*$:program_prefix = ${program_prefix}:" \
- -e "s:^program_suffix[ ]*=.*$:program_suffix = ${program_suffix}:" \
- -e "s:^program_transform_name[ ]*=.*$:program_transform_name = ${program_transform_name}:" \
- -e "s|^tooldir[ ]*=.*$|tooldir = ${tooldir}|" \
- -e "s|^build_tooldir[ ]*=.*$|build_tooldir = ${tooldir}|" \
- -e "s:^DEFAULT_YACC[ ]*=.*$:DEFAULT_YACC = ${DEFAULT_YACC}:" \
- -e "s:^DEFAULT_LEX[ ]*=.*$:DEFAULT_LEX = ${DEFAULT_LEX}:" \
- -e "s:^DEFAULT_M4[ ]*=.*$:DEFAULT_M4 = ${DEFAULT_M4}:" \
- ${subdir}/Makefile.tem >> ${Makefile}
-
- sed -e "s:^GDB_TK[ ]*=.*$:GDB_TK = ${GDB_TK}:" ${Makefile} >${Makefile}.tem
- mv -f ${Makefile}.tem ${Makefile}
-
- # If this is a Canadian Cross, preset the values of many more
- # tools.
- if [ "${build}" != "${host}" ]; then
- for var in ${tools}; do
- eval val=\$${var}
- sed -e "/^${var}[ ]*=/{
- :loop1
- /\\\\$/ N
- /\\\\$/ b loop1
- s/\\\\\\n//g
- s%^${var}[ ]*=.*$%${var} = ${val}%
- }" ${Makefile} > ${Makefile}.tem
- mv -f ${Makefile}.tem ${Makefile}
- done
- fi
-
- # final copy now in ${Makefile}
-
- else
- echo "No Makefile.in found in ${srcdir}/${subdir}, unable to configure" 1>&2
- fi
-
- rm -f ${subdir}/Makefile.tem
-
- case "${host_makefile_frag}" in
- "") using= ;;
- *) using="and \"${host_makefile_frag}\"" ;;
- esac
-
- case "${target_makefile_frag}" in
- "") ;;
- *) using="${using} and \"${target_makefile_frag}\"" ;;
- esac
-
- case "${site_makefile_frag}" in
- "") ;;
- *) using="${using} and \"${site_makefile_frag}\"" ;;
- esac
-
- newusing=`echo "${using}" | sed 's/and/using/'`
- using=${newusing}
- echo "Created \"${Makefile}\" in" ${PWD=`${PWDCMD-pwd}`} ${using}
-
- . ${tmpfile}.pos
-
- # describe the chosen configuration in config.status.
- # Make that file a shellscript which will reestablish
- # the same configuration. Used in Makefiles to rebuild
- # Makefiles.
-
- case "${norecursion}" in
- "") arguments="${arguments} --norecursion" ;;
- *) ;;
- esac
-
- if [ ${subdir} = . ] ; then
- echo "#!/bin/sh
- # ${NO_EDIT}
- # This directory was configured as follows:
- ${progname}" ${arguments} "
- # ${using}" > ${subdir}/config.new
- else
- echo "#!/bin/sh
- # ${NO_EDIT}
- # This directory was configured as follows:
- cd ${invsubdir}
- ${progname}" ${arguments} "
- # ${using}" > ${subdir}/config.new
- fi
- chmod a+x ${subdir}/config.new
- if [ -r ${subdir}/config.back ] ; then
- mv -f ${subdir}/config.back ${subdir}/config.status
- fi
- ${config_shell} ${moveifchange} ${subdir}/config.new ${subdir}/config.status
- ;;
-
- *) rm -f ${Makefile} ${subdir}/config.status ${links} ;;
- esac
- done
-
- # If there are subdirectories, then recur.
- if [ -z "${norecursion}" ] && [ -n "${configdirs}" ] ; then
- for configdir in ${configdirs} ${extraconfigdirs} ; do
-
- # If configdir contains ',' it is
- # srcdir,builddir,target_alias
- # These come from extraconfigdirs.
- case ${configdir} in
- *,*)
- eval `echo ${configdir} | sed -e 's/\([^,]*\),\([^,]*\),\(.*\)/cfg_dir=\1 bld_dir=\2 tgt_alias=\3/'`
- ;;
- *)
- cfg_dir=${configdir}
- bld_dir=${configdir}
- tgt_alias=${target_alias}
- ;;
- esac
-
- if [ -d ${srcdir}/${cfg_dir} ] ; then
- eval echo Configuring ${configdir}... ${redirect}
- case "${srcdir}" in
- ".") ;;
- *)
- if [ ! -d ./${bld_dir} ] ; then
- if mkdir ./${bld_dir} ; then
- true
- else
- echo '***' "${progname}: could not make ${PWD=`${PWDCMD-pwd}`}/${bld_dir}" 1>&2
- exit 1
- fi
- fi
- ;;
- esac
-
- POPDIR=${PWD=`${PWDCMD-pwd}`}
- cd ${bld_dir}
-
- ### figure out what to do with srcdir
- case "${srcdir}" in
- ".") newsrcdir=${srcdir} ;; # no -srcdir option. We're building in place.
- /* | [A-Za-z]:[\\/]* ) # absolute path
- newsrcdir=${srcdir}/${cfg_dir}
- srcdiroption="--srcdir=${newsrcdir}"
- ;;
- *) # otherwise relative
- newsrcdir=../${srcdir}/${cfg_dir}
- srcdiroption="--srcdir=${newsrcdir}"
- ;;
- esac
-
- # Handle --cache-file=../XXX
- case "${cache_file}" in
- "") # empty
- ;;
- /* | [A-Za-z]:[\\/]* ) # absolute path
- cache_file_option="--cache-file=${cache_file}"
- ;;
- *) # relative path
- cache_file_option="--cache-file=../${cache_file}"
- ;;
- esac
-
- ### check for guested configure, otherwise fix possibly relative progname
- if [ -f ${newsrcdir}/configure ] ; then
- recprog=${newsrcdir}/configure
- elif [ -f ${newsrcdir}/configure.in ] ; then
- case "${progname}" in
- /* | [A-Za-z]:[\\/]* ) recprog=${progname} ;;
- *) recprog=../${progname} ;;
- esac
- else
- eval echo No configuration information in ${cfg_dir} ${redirect}
- recprog=
- fi
-
- ### The recursion line is here.
- if [ ! -z "${recprog}" ] ; then
- if eval ${config_shell} ${recprog} ${verbose} ${buildopt} --host=${host_alias} --target=${tgt_alias} \
- ${prefixoption} ${tmpdiroption} ${exec_prefixoption} \
- ${srcdiroption} ${diroptions} ${program_prefixoption} ${program_suffixoption} ${program_transform_nameoption} ${site_option} ${withoptions} ${withoutoptions} ${enableoptions} ${disableoptions} ${floating_pointoption} ${cache_file_option} ${removing} ${other_options} ${redirect} ; then
- true
- else
- echo Configure in `${PWDCMD-pwd}` failed, exiting. 1>&2
- exit 1
- fi
- fi
-
- cd ${POPDIR}
- fi
- done
- fi
-
- # Perform the same cleanup as the trap handler, minus the "exit 1" of course,
- # and reset the trap handler.
- rm -rf ${tmpdir}
- trap 0
-
- exit 0
-
- #
- # Local Variables:
- # fill-column: 131
- # End:
- #
-
- # end of configure
--- 0 ----
Index: configure.in
===================================================================
RCS file: /cvs/src/src/configure.in,v
retrieving revision 1.102
diff -c -3 -p -r1.102 configure.in
*** configure.in 6 Aug 2002 09:18:28 -0000 1.102
--- configure.in 13 Aug 2002 18:50:12 -0000
*************** case "${target}" in
*** 379,385 ****
avr-*-*)
noconfigdirs="$noconfigdirs target-libiberty ${libstdcxx_version} ${libgcj}"
;;
! c4x-*-*)
noconfigdirs="$noconfigdirs ${libstdcxx_version} target-libgloss ${libgcj}"
;;
c54x*-*-* | tic54x-*-*)
--- 379,385 ----
avr-*-*)
noconfigdirs="$noconfigdirs target-libiberty ${libstdcxx_version} ${libgcj}"
;;
! c4x-*-* | tic4x-*-*)
noconfigdirs="$noconfigdirs ${libstdcxx_version} target-libgloss ${libgcj}"
;;
c54x*-*-* | tic54x-*-*)
Index: bfd/ChangeLog
===================================================================
RCS file: /cvs/src/src/bfd/ChangeLog,v
retrieving revision 1.1658
diff -c -3 -p -r1.1658 ChangeLog
*** bfd/ChangeLog 12 Aug 2002 19:23:33 -0000 1.1658
--- bfd/ChangeLog 13 Aug 2002 18:50:13 -0000
***************
*** 1,3 ****
--- 1,11 ----
+ 2002-08-13 Svein E. Seldal <Svein.Seldal@solidas.com>
+
+ * Makefile.am: Added support for tic4x target
+ * Makefile.in: Regenerate.
+ * config.bfd: Add support for tic4x-*-*coff* and c4x-*-*coff*.
+ * configure.in: Add support for tic4x.
+ * configure: Regenerate.
+
2002-08-12 H.J. Lu <hjl@gnu.org>
* elflink.h (elf_add_default_symbol): Preserve section across
Index: bfd/Makefile.am
===================================================================
RCS file: /cvs/src/src/bfd/Makefile.am,v
retrieving revision 1.97
diff -c -3 -p -r1.97 Makefile.am
*** bfd/Makefile.am 9 Aug 2002 15:38:21 -0000 1.97
--- bfd/Makefile.am 13 Aug 2002 18:50:14 -0000
*************** ALL_MACHINES = \
*** 89,94 ****
--- 89,95 ----
cpu-sh.lo \
cpu-sparc.lo \
cpu-tic30.lo \
+ cpu-tic4x.lo \
cpu-tic54x.lo \
cpu-tic80.lo \
cpu-v850.lo \
*************** ALL_MACHINES_CFILES = \
*** 140,145 ****
--- 141,147 ----
cpu-sh.c \
cpu-sparc.c \
cpu-tic30.c \
+ cpu-tic4x.c \
cpu-tic54x.c \
cpu-tic80.c \
cpu-v850.c \
*************** BFD32_BACKENDS = \
*** 185,190 ****
--- 187,193 ----
coff-stgo32.lo \
coff-svm68k.lo \
coff-tic30.lo \
+ coff-tic4x.lo \
coff-tic54x.lo \
coff-tic80.lo \
coff-u68k.lo \
*************** BFD32_BACKENDS_CFILES = \
*** 345,350 ****
--- 348,354 ----
coff-stgo32.c \
coff-svm68k.c \
coff-tic30.c \
+ coff-tic4x.c \
coff-tic54x.c \
coff-tic80.c \
coff-u68k.c \
*************** cpu-s390.lo: cpu-s390.c $(INCDIR)/filena
*** 933,938 ****
--- 937,943 ----
cpu-sh.lo: cpu-sh.c $(INCDIR)/filenames.h
cpu-sparc.lo: cpu-sparc.c $(INCDIR)/filenames.h
cpu-tic30.lo: cpu-tic30.c $(INCDIR)/filenames.h
+ cpu-tic4x.lo: cpu-tic4x.c $(INCDIR)/filenames.h
cpu-tic54x.lo: cpu-tic54x.c $(INCDIR)/filenames.h
cpu-tic80.lo: cpu-tic80.c $(INCDIR)/filenames.h
cpu-v850.lo: cpu-v850.c $(INCDIR)/filenames.h $(INCDIR)/safe-ctype.h
*************** coff-svm68k.lo: coff-svm68k.c coff-m68k.
*** 1051,1056 ****
--- 1056,1064 ----
coff-tic30.lo: coff-tic30.c $(INCDIR)/filenames.h $(INCDIR)/bfdlink.h \
$(INCDIR)/coff/tic30.h $(INCDIR)/coff/external.h $(INCDIR)/coff/internal.h \
libcoff.h coffcode.h coffswap.h
+ coff-tic4x.lo: coff-tic4x.c $(INCDIR)/filenames.h \
+ $(INCDIR)/bfdlink.h $(INCDIR)/coff/tic4x.h $(INCDIR)/coff/ti.h \
+ $(INCDIR)/coff/internal.h libcoff.h coffcode.h coffswap.h
coff-tic54x.lo: coff-tic54x.c $(INCDIR)/filenames.h \
$(INCDIR)/bfdlink.h $(INCDIR)/coff/tic54x.h $(INCDIR)/coff/ti.h \
$(INCDIR)/coff/internal.h libcoff.h coffcode.h coffswap.h
Index: bfd/Makefile.in
===================================================================
RCS file: /cvs/src/src/bfd/Makefile.in,v
retrieving revision 1.107
diff -c -3 -p -r1.107 Makefile.in
*** bfd/Makefile.in 9 Aug 2002 15:38:21 -0000 1.107
--- bfd/Makefile.in 13 Aug 2002 18:50:14 -0000
*************** ALL_MACHINES = \
*** 215,220 ****
--- 215,221 ----
cpu-sh.lo \
cpu-sparc.lo \
cpu-tic30.lo \
+ cpu-tic4x.lo \
cpu-tic54x.lo \
cpu-tic80.lo \
cpu-v850.lo \
*************** ALL_MACHINES_CFILES = \
*** 267,272 ****
--- 268,274 ----
cpu-sh.c \
cpu-sparc.c \
cpu-tic30.c \
+ cpu-tic4x.c \
cpu-tic54x.c \
cpu-tic80.c \
cpu-v850.c \
*************** BFD32_BACKENDS = \
*** 313,318 ****
--- 315,321 ----
coff-stgo32.lo \
coff-svm68k.lo \
coff-tic30.lo \
+ coff-tic4x.lo \
coff-tic54x.lo \
coff-tic80.lo \
coff-u68k.lo \
*************** BFD32_BACKENDS_CFILES = \
*** 474,479 ****
--- 477,483 ----
coff-stgo32.c \
coff-svm68k.c \
coff-tic30.c \
+ coff-tic4x.c \
coff-tic54x.c \
coff-tic80.c \
coff-u68k.c \
*************** cpu-s390.lo: cpu-s390.c $(INCDIR)/filena
*** 1463,1468 ****
--- 1467,1473 ----
cpu-sh.lo: cpu-sh.c $(INCDIR)/filenames.h
cpu-sparc.lo: cpu-sparc.c $(INCDIR)/filenames.h
cpu-tic30.lo: cpu-tic30.c $(INCDIR)/filenames.h
+ cpu-tic4x.lo: cpu-tic4x.c $(INCDIR)/filenames.h
cpu-tic54x.lo: cpu-tic54x.c $(INCDIR)/filenames.h
cpu-tic80.lo: cpu-tic80.c $(INCDIR)/filenames.h
cpu-v850.lo: cpu-v850.c $(INCDIR)/filenames.h $(INCDIR)/safe-ctype.h
*************** coff-svm68k.lo: coff-svm68k.c coff-m68k.
*** 1581,1586 ****
--- 1586,1594 ----
coff-tic30.lo: coff-tic30.c $(INCDIR)/filenames.h $(INCDIR)/bfdlink.h \
$(INCDIR)/coff/tic30.h $(INCDIR)/coff/external.h $(INCDIR)/coff/internal.h \
libcoff.h coffcode.h coffswap.h
+ coff-tic4x.lo: coff-tic4x.c $(INCDIR)/filenames.h \
+ $(INCDIR)/bfdlink.h $(INCDIR)/coff/tic4x.h $(INCDIR)/coff/ti.h \
+ $(INCDIR)/coff/internal.h libcoff.h coffcode.h coffswap.h
coff-tic54x.lo: coff-tic54x.c $(INCDIR)/filenames.h \
$(INCDIR)/bfdlink.h $(INCDIR)/coff/tic54x.h $(INCDIR)/coff/ti.h \
$(INCDIR)/coff/internal.h libcoff.h coffcode.h coffswap.h
Index: bfd/config.bfd
===================================================================
RCS file: /cvs/src/src/bfd/config.bfd,v
retrieving revision 1.111
diff -c -3 -p -r1.111 config.bfd
*** bfd/config.bfd 9 Aug 2002 15:38:21 -0000 1.111
--- bfd/config.bfd 13 Aug 2002 18:50:15 -0000
*************** case "${targ_cpu}" in
*** 34,39 ****
--- 34,40 ----
alpha*) targ_archs=bfd_alpha_arch ;;
arm*) targ_archs=bfd_arm_arch ;;
c30*) targ_archs=bfd_tic30_arch ;;
+ c4x*) targ_archs=bfd_tic4x_arch ;;
c54x*) targ_archs=bfd_tic54x_arch ;;
dlx*) targ_archs=bfd_dlx_arch ;;
hppa*) targ_archs=bfd_hppa_arch ;;
*************** case "${targ}" in
*** 254,259 ****
--- 255,266 ----
;;
c30-*-*coff* | tic30-*-*coff*)
targ_defvec=tic30_coff_vec
+ ;;
+
+ c4x*-*-*coff* | tic4x-*-*coff*)
+ targ_defvec=tic4x_coff1_vec
+ targ_selvecs="tic4x_coff1_beh_vec tic4x_coff2_vec tic4x_coff2_beh_vec tic4x_coff0_vec tic4x_coff0_beh_vec"
+ targ_underscore=yes
;;
c54x*-*-*coff* | tic54x-*-*coff*)
Index: bfd/configure
===================================================================
RCS file: /cvs/src/src/bfd/configure,v
retrieving revision 1.130
diff -c -3 -p -r1.130 configure
*** bfd/configure 9 Aug 2002 15:38:22 -0000 1.130
--- bfd/configure 13 Aug 2002 18:50:16 -0000
*************** do
*** 6238,6243 ****
--- 6238,6249 ----
sunos_big_vec) tb="$tb sunos.lo aout32.lo" ;;
tic30_aout_vec) tb="$tb aout-tic30.lo" ;;
tic30_coff_vec) tb="$tb coff-tic30.lo" ;;
+ tic4x_coff0_vec) tb="$tb coff-tic4x.lo" ;;
+ tic4x_coff0_beh_vec) tb="$tb coff-tic4x.lo" ;;
+ tic4x_coff1_vec) tb="$tb coff-tic4x.lo" ;;
+ tic4x_coff1_beh_vec) tb="$tb coff-tic4x.lo" ;;
+ tic4x_coff2_vec) tb="$tb coff-tic4x.lo" ;;
+ tic4x_coff2_beh_vec) tb="$tb coff-tic4x.lo" ;;
tic54x_coff0_beh_vec) tb="$tb coff-tic54x.lo" ;;
tic54x_coff0_vec) tb="$tb coff-tic54x.lo" ;;
tic54x_coff1_beh_vec) tb="$tb coff-tic54x.lo" ;;
*************** case ${host64}-${target64}-${want64} in
*** 6330,6339 ****
if test -n "$GCC" ; then
bad_64bit_gcc=no;
echo $ac_n "checking for gcc version with buggy 64-bit support""... $ac_c" 1>&6
! echo "configure:6334: checking for gcc version with buggy 64-bit support" >&5
# Add more tests for gcc versions with non-working 64-bit support here.
cat > conftest.$ac_ext <<EOF
! #line 6337 "configure"
#include "confdefs.h"
:__GNUC__:__GNUC_MINOR__:__i386__:
EOF
--- 6336,6345 ----
if test -n "$GCC" ; then
bad_64bit_gcc=no;
echo $ac_n "checking for gcc version with buggy 64-bit support""... $ac_c" 1>&6
! echo "configure:6340: checking for gcc version with buggy 64-bit support" >&5
# Add more tests for gcc versions with non-working 64-bit support here.
cat > conftest.$ac_ext <<EOF
! #line 6343 "configure"
#include "confdefs.h"
:__GNUC__:__GNUC_MINOR__:__i386__:
EOF
*************** for ac_hdr in stdlib.h unistd.h sys/stat
*** 6378,6394 ****
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
! echo "configure:6382: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
! #line 6387 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
! { (eval echo configure:6392: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
--- 6384,6400 ----
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
! echo "configure:6388: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
! #line 6393 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
! { (eval echo configure:6398: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
*************** done
*** 6417,6428 ****
for ac_func in getpagesize
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
! echo "configure:6421: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
! #line 6426 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
--- 6423,6434 ----
for ac_func in getpagesize
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
! echo "configure:6427: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
! #line 6432 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
*************** $ac_func();
*** 6445,6451 ****
; return 0; }
EOF
! if { (eval echo configure:6449: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
--- 6451,6457 ----
; return 0; }
EOF
! if { (eval echo configure:6455: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
*************** fi
*** 6470,6476 ****
done
echo $ac_n "checking for working mmap""... $ac_c" 1>&6
! echo "configure:6474: checking for working mmap" >&5
if eval "test \"`echo '$''{'ac_cv_func_mmap_fixed_mapped'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
--- 6476,6482 ----
done
echo $ac_n "checking for working mmap""... $ac_c" 1>&6
! echo "configure:6480: checking for working mmap" >&5
if eval "test \"`echo '$''{'ac_cv_func_mmap_fixed_mapped'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
*************** else
*** 6478,6484 ****
ac_cv_func_mmap_fixed_mapped=no
else
cat > conftest.$ac_ext <<EOF
! #line 6482 "configure"
#include "confdefs.h"
/* Thanks to Mike Haertel and Jim Avera for this test.
--- 6484,6490 ----
ac_cv_func_mmap_fixed_mapped=no
else
cat > conftest.$ac_ext <<EOF
! #line 6488 "configure"
#include "confdefs.h"
/* Thanks to Mike Haertel and Jim Avera for this test.
*************** main()
*** 6631,6637 ****
}
EOF
! if { (eval echo configure:6635: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_func_mmap_fixed_mapped=yes
else
--- 6637,6643 ----
}
EOF
! if { (eval echo configure:6641: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_func_mmap_fixed_mapped=yes
else
*************** fi
*** 6656,6667 ****
for ac_func in madvise mprotect
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
! echo "configure:6660: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
! #line 6665 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
--- 6662,6673 ----
for ac_func in madvise mprotect
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
! echo "configure:6666: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
! #line 6671 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
*************** $ac_func();
*** 6684,6690 ****
; return 0; }
EOF
! if { (eval echo configure:6688: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
--- 6690,6696 ----
; return 0; }
EOF
! if { (eval echo configure:6694: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
Index: bfd/configure.in
===================================================================
RCS file: /cvs/src/src/bfd/configure.in,v
retrieving revision 1.110
diff -c -3 -p -r1.110 configure.in
*** bfd/configure.in 9 Aug 2002 15:38:22 -0000 1.110
--- bfd/configure.in 13 Aug 2002 18:50:16 -0000
*************** do
*** 739,744 ****
--- 739,750 ----
sunos_big_vec) tb="$tb sunos.lo aout32.lo" ;;
tic30_aout_vec) tb="$tb aout-tic30.lo" ;;
tic30_coff_vec) tb="$tb coff-tic30.lo" ;;
+ tic4x_coff0_vec) tb="$tb coff-tic4x.lo" ;;
+ tic4x_coff0_beh_vec) tb="$tb coff-tic4x.lo" ;;
+ tic4x_coff1_vec) tb="$tb coff-tic4x.lo" ;;
+ tic4x_coff1_beh_vec) tb="$tb coff-tic4x.lo" ;;
+ tic4x_coff2_vec) tb="$tb coff-tic4x.lo" ;;
+ tic4x_coff2_beh_vec) tb="$tb coff-tic4x.lo" ;;
tic54x_coff0_beh_vec) tb="$tb coff-tic54x.lo" ;;
tic54x_coff0_vec) tb="$tb coff-tic54x.lo" ;;
tic54x_coff1_beh_vec) tb="$tb coff-tic54x.lo" ;;
Index: gas/ChangeLog
===================================================================
RCS file: /cvs/src/src/gas/ChangeLog,v
retrieving revision 1.1448
diff -c -3 -p -r1.1448 ChangeLog
*** gas/ChangeLog 12 Aug 2002 08:33:42 -0000 1.1448
--- gas/ChangeLog 13 Aug 2002 18:50:18 -0000
***************
*** 1,3 ****
--- 1,8 ----
+ 2002-08-13 Svein E. Seldal <Svein.Seldal@solidas.com>
+
+ * configure.in: Added support for tic4x-*-* and c4x-*-*
+ * configure: Regenerated.
+
2002-08-12 Richard Sandiford <rsandifo@redhat.com>
* config/tc-mips.c (mips_ip): Don't work out the value of
Index: gas/configure
===================================================================
RCS file: /cvs/src/src/gas/configure,v
retrieving revision 1.128
diff -c -3 -p -r1.128 configure
*** gas/configure 9 Aug 2002 15:38:23 -0000 1.128
--- gas/configure 13 Aug 2002 18:50:21 -0000
*************** EOF
*** 2617,2622 ****
--- 2617,2623 ----
tic30-*-*aout*) fmt=aout bfd_gas=yes ;;
tic30-*-*coff*) fmt=coff bfd_gas=yes ;;
+ tic4x-*-* | c4x-*-*) fmt=coff bfd_gas=yes ;;
tic54x-*-* | c54x*-*-*) fmt=coff bfd_gas=yes need_libm=yes;;
tic80-*-*) fmt=coff ;;
*************** EOF
*** 3173,3179 ****
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
! echo "configure:3177: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
--- 3174,3180 ----
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
! echo "configure:3178: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
*************** if test -z "$CC"; then
*** 3203,3209 ****
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
! echo "configure:3207: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
--- 3204,3210 ----
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
! echo "configure:3208: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
*************** fi
*** 3254,3260 ****
# Extract the first word of "cl", so it can be a program name with args.
set dummy cl; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
! echo "configure:3258: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
--- 3255,3261 ----
# Extract the first word of "cl", so it can be a program name with args.
set dummy cl; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
! echo "configure:3259: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
*************** fi
*** 3286,3292 ****
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
! echo "configure:3290: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
--- 3287,3293 ----
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
! echo "configure:3291: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
*************** cross_compiling=$ac_cv_prog_cc_cross
*** 3297,3308 ****
cat > conftest.$ac_ext << EOF
! #line 3301 "configure"
#include "confdefs.h"
main(){return(0);}
EOF
! if { (eval echo configure:3306: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
ac_cv_prog_cc_works=yes
# If we can't run a trivial program, we are probably using a cross compiler.
if (./conftest; exit) 2>/dev/null; then
--- 3298,3309 ----
cat > conftest.$ac_ext << EOF
! #line 3302 "configure"
#include "confdefs.h"
main(){return(0);}
EOF
! if { (eval echo configure:3307: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
ac_cv_prog_cc_works=yes
# If we can't run a trivial program, we are probably using a cross compiler.
if (./conftest; exit) 2>/dev/null; then
*************** if test $ac_cv_prog_cc_works = no; then
*** 3328,3339 ****
{ echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
! echo "configure:3332: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
cross_compiling=$ac_cv_prog_cc_cross
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
! echo "configure:3337: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
--- 3329,3340 ----
{ echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
! echo "configure:3333: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
cross_compiling=$ac_cv_prog_cc_cross
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
! echo "configure:3338: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
*************** else
*** 3342,3348 ****
yes;
#endif
EOF
! if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:3346: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
--- 3343,3349 ----
yes;
#endif
EOF
! if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:3347: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
*************** ac_test_CFLAGS="${CFLAGS+set}"
*** 3361,3367 ****
ac_save_CFLAGS="$CFLAGS"
CFLAGS=
echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
! echo "configure:3365: checking whether ${CC-cc} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
--- 3362,3368 ----
ac_save_CFLAGS="$CFLAGS"
CFLAGS=
echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
! echo "configure:3366: checking whether ${CC-cc} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
*************** do
*** 3398,3404 ****
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
! echo "configure:3402: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_YACC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
--- 3399,3405 ----
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
! echo "configure:3403: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_YACC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
*************** done
*** 3429,3435 ****
test -n "$YACC" || YACC="yacc"
echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
! echo "configure:3433: checking how to run the C preprocessor" >&5
# On Suns, sometimes $CPP names a directory.
if test -n "$CPP" && test -d "$CPP"; then
CPP=
--- 3430,3436 ----
test -n "$YACC" || YACC="yacc"
echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
! echo "configure:3434: checking how to run the C preprocessor" >&5
# On Suns, sometimes $CPP names a directory.
if test -n "$CPP" && test -d "$CPP"; then
CPP=
*************** else
*** 3444,3456 ****
# On the NeXT, cc -E runs the code through the compiler's parser,
# not just through cpp.
cat > conftest.$ac_ext <<EOF
! #line 3448 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
! { (eval echo configure:3454: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
--- 3445,3457 ----
# On the NeXT, cc -E runs the code through the compiler's parser,
# not just through cpp.
cat > conftest.$ac_ext <<EOF
! #line 3449 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
! { (eval echo configure:3455: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
*************** else
*** 3461,3473 ****
rm -rf conftest*
CPP="${CC-cc} -E -traditional-cpp"
cat > conftest.$ac_ext <<EOF
! #line 3465 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
! { (eval echo configure:3471: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
--- 3462,3474 ----
rm -rf conftest*
CPP="${CC-cc} -E -traditional-cpp"
cat > conftest.$ac_ext <<EOF
! #line 3466 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
! { (eval echo configure:3472: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
*************** else
*** 3478,3490 ****
rm -rf conftest*
CPP="${CC-cc} -nologo -E"
cat > conftest.$ac_ext <<EOF
! #line 3482 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
! { (eval echo configure:3488: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
--- 3479,3491 ----
rm -rf conftest*
CPP="${CC-cc} -nologo -E"
cat > conftest.$ac_ext <<EOF
! #line 3483 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
! { (eval echo configure:3489: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
*************** do
*** 3514,3520 ****
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
! echo "configure:3518: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LEX'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
--- 3515,3521 ----
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
! echo "configure:3519: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LEX'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
*************** test -n "$LEX" || LEX="$missing_dir/miss
*** 3547,3553 ****
# Extract the first word of "flex", so it can be a program name with args.
set dummy flex; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
! echo "configure:3551: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LEX'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
--- 3548,3554 ----
# Extract the first word of "flex", so it can be a program name with args.
set dummy flex; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
! echo "configure:3552: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LEX'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
*************** then
*** 3581,3587 ****
*) ac_lib=l ;;
esac
echo $ac_n "checking for yywrap in -l$ac_lib""... $ac_c" 1>&6
! echo "configure:3585: checking for yywrap in -l$ac_lib" >&5
ac_lib_var=`echo $ac_lib'_'yywrap | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
--- 3582,3588 ----
*) ac_lib=l ;;
esac
echo $ac_n "checking for yywrap in -l$ac_lib""... $ac_c" 1>&6
! echo "configure:3586: checking for yywrap in -l$ac_lib" >&5
ac_lib_var=`echo $ac_lib'_'yywrap | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
*************** else
*** 3589,3595 ****
ac_save_LIBS="$LIBS"
LIBS="-l$ac_lib $LIBS"
cat > conftest.$ac_ext <<EOF
! #line 3593 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
--- 3590,3596 ----
ac_save_LIBS="$LIBS"
LIBS="-l$ac_lib $LIBS"
cat > conftest.$ac_ext <<EOF
! #line 3594 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
*************** int main() {
*** 3600,3606 ****
yywrap()
; return 0; }
EOF
! if { (eval echo configure:3604: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
--- 3601,3607 ----
yywrap()
; return 0; }
EOF
! if { (eval echo configure:3605: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
*************** fi
*** 3623,3629 ****
fi
echo $ac_n "checking lex output file root""... $ac_c" 1>&6
! echo "configure:3627: checking lex output file root" >&5
if eval "test \"`echo '$''{'ac_cv_prog_lex_root'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
--- 3624,3630 ----
fi
echo $ac_n "checking lex output file root""... $ac_c" 1>&6
! echo "configure:3628: checking lex output file root" >&5
if eval "test \"`echo '$''{'ac_cv_prog_lex_root'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
*************** echo "$ac_t""$ac_cv_prog_lex_root" 1>&6
*** 3644,3650 ****
LEX_OUTPUT_ROOT=$ac_cv_prog_lex_root
echo $ac_n "checking whether yytext is a pointer""... $ac_c" 1>&6
! echo "configure:3648: checking whether yytext is a pointer" >&5
if eval "test \"`echo '$''{'ac_cv_prog_lex_yytext_pointer'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
--- 3645,3651 ----
LEX_OUTPUT_ROOT=$ac_cv_prog_lex_root
echo $ac_n "checking whether yytext is a pointer""... $ac_c" 1>&6
! echo "configure:3649: checking whether yytext is a pointer" >&5
if eval "test \"`echo '$''{'ac_cv_prog_lex_yytext_pointer'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
*************** echo 'extern char *yytext;' >>$LEX_OUTPU
*** 3656,3669 ****
ac_save_LIBS="$LIBS"
LIBS="$LIBS $LEXLIB"
cat > conftest.$ac_ext <<EOF
! #line 3660 "configure"
#include "confdefs.h"
`cat $LEX_OUTPUT_ROOT.c`
int main() {
; return 0; }
EOF
! if { (eval echo configure:3667: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_prog_lex_yytext_pointer=yes
else
--- 3657,3670 ----
ac_save_LIBS="$LIBS"
LIBS="$LIBS $LEXLIB"
cat > conftest.$ac_ext <<EOF
! #line 3661 "configure"
#include "confdefs.h"
`cat $LEX_OUTPUT_ROOT.c`
int main() {
; return 0; }
EOF
! if { (eval echo configure:3668: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_prog_lex_yytext_pointer=yes
else
*************** ALL_LINGUAS="fr tr es"
*** 3689,3695 ****
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
! echo "configure:3693: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
--- 3690,3696 ----
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
! echo "configure:3694: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
*************** else
*** 3717,3728 ****
fi
echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
! echo "configure:3721: checking for ANSI C header files" >&5
if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
! #line 3726 "configure"
#include "confdefs.h"
#include <stdlib.h>
#include <stdarg.h>
--- 3718,3729 ----
fi
echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
! echo "configure:3722: checking for ANSI C header files" >&5
if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
! #line 3727 "configure"
#include "confdefs.h"
#include <stdlib.h>
#include <stdarg.h>
*************** else
*** 3730,3736 ****
#include <float.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
! { (eval echo configure:3734: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
--- 3731,3737 ----
#include <float.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
! { (eval echo configure:3735: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
*************** rm -f conftest*
*** 3747,3753 ****
if test $ac_cv_header_stdc = yes; then
# SunOS 4.x string.h does not declare mem*, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
! #line 3751 "configure"
#include "confdefs.h"
#include <string.h>
EOF
--- 3748,3754 ----
if test $ac_cv_header_stdc = yes; then
# SunOS 4.x string.h does not declare mem*, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
! #line 3752 "configure"
#include "confdefs.h"
#include <string.h>
EOF
*************** fi
*** 3765,3771 ****
if test $ac_cv_header_stdc = yes; then
# ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
! #line 3769 "configure"
#include "confdefs.h"
#include <stdlib.h>
EOF
--- 3766,3772 ----
if test $ac_cv_header_stdc = yes; then
# ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
! #line 3770 "configure"
#include "confdefs.h"
#include <stdlib.h>
EOF
*************** if test "$cross_compiling" = yes; then
*** 3786,3792 ****
:
else
cat > conftest.$ac_ext <<EOF
! #line 3790 "configure"
#include "confdefs.h"
#include <ctype.h>
#define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
--- 3787,3793 ----
:
else
cat > conftest.$ac_ext <<EOF
! #line 3791 "configure"
#include "confdefs.h"
#include <ctype.h>
#define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
*************** if (XOR (islower (i), ISLOWER (i)) || to
*** 3797,3803 ****
exit (0); }
EOF
! if { (eval echo configure:3801: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
:
else
--- 3798,3804 ----
exit (0); }
EOF
! if { (eval echo configure:3802: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
:
else
*************** EOF
*** 3821,3832 ****
fi
echo $ac_n "checking for working const""... $ac_c" 1>&6
! echo "configure:3825: checking for working const" >&5
if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
! #line 3830 "configure"
#include "confdefs.h"
int main() {
--- 3822,3833 ----
fi
echo $ac_n "checking for working const""... $ac_c" 1>&6
! echo "configure:3826: checking for working const" >&5
if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
! #line 3831 "configure"
#include "confdefs.h"
int main() {
*************** ccp = (char const *const *) p;
*** 3875,3881 ****
; return 0; }
EOF
! if { (eval echo configure:3879: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_const=yes
else
--- 3876,3882 ----
; return 0; }
EOF
! if { (eval echo configure:3880: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_const=yes
else
*************** EOF
*** 3896,3916 ****
fi
echo $ac_n "checking for inline""... $ac_c" 1>&6
! echo "configure:3900: checking for inline" >&5
if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_c_inline=no
for ac_kw in inline __inline__ __inline; do
cat > conftest.$ac_ext <<EOF
! #line 3907 "configure"
#include "confdefs.h"
int main() {
} $ac_kw foo() {
; return 0; }
EOF
! if { (eval echo configure:3914: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_inline=$ac_kw; break
else
--- 3897,3917 ----
fi
echo $ac_n "checking for inline""... $ac_c" 1>&6
! echo "configure:3901: checking for inline" >&5
if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_c_inline=no
for ac_kw in inline __inline__ __inline; do
cat > conftest.$ac_ext <<EOF
! #line 3908 "configure"
#include "confdefs.h"
int main() {
} $ac_kw foo() {
; return 0; }
EOF
! if { (eval echo configure:3915: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_inline=$ac_kw; break
else
*************** EOF
*** 3936,3947 ****
esac
echo $ac_n "checking for off_t""... $ac_c" 1>&6
! echo "configure:3940: checking for off_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
! #line 3945 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
--- 3937,3948 ----
esac
echo $ac_n "checking for off_t""... $ac_c" 1>&6
! echo "configure:3941: checking for off_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
! #line 3946 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
*************** EOF
*** 3969,3980 ****
fi
echo $ac_n "checking for size_t""... $ac_c" 1>&6
! echo "configure:3973: checking for size_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
! #line 3978 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
--- 3970,3981 ----
fi
echo $ac_n "checking for size_t""... $ac_c" 1>&6
! echo "configure:3974: checking for size_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
! #line 3979 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
*************** fi
*** 4004,4022 ****
# The Ultrix 4.2 mips builtin alloca declared by alloca.h only works
# for constant arguments. Useless!
echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6
! echo "configure:4008: checking for working alloca.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
! #line 4013 "configure"
#include "confdefs.h"
#include <alloca.h>
int main() {
char *p = alloca(2 * sizeof(int));
; return 0; }
EOF
! if { (eval echo configure:4020: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_header_alloca_h=yes
else
--- 4005,4023 ----
# The Ultrix 4.2 mips builtin alloca declared by alloca.h only works
# for constant arguments. Useless!
echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6
! echo "configure:4009: checking for working alloca.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
! #line 4014 "configure"
#include "confdefs.h"
#include <alloca.h>
int main() {
char *p = alloca(2 * sizeof(int));
; return 0; }
EOF
! if { (eval echo configure:4021: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_header_alloca_h=yes
else
*************** EOF
*** 4037,4048 ****
fi
echo $ac_n "checking for alloca""... $ac_c" 1>&6
! echo "configure:4041: checking for alloca" >&5
if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
! #line 4046 "configure"
#include "confdefs.h"
#ifdef __GNUC__
--- 4038,4049 ----
fi
echo $ac_n "checking for alloca""... $ac_c" 1>&6
! echo "configure:4042: checking for alloca" >&5
if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
! #line 4047 "configure"
#include "confdefs.h"
#ifdef __GNUC__
*************** int main() {
*** 4070,4076 ****
char *p = (char *) alloca(1);
; return 0; }
EOF
! if { (eval echo configure:4074: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_func_alloca_works=yes
else
--- 4071,4077 ----
char *p = (char *) alloca(1);
; return 0; }
EOF
! if { (eval echo configure:4075: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_func_alloca_works=yes
else
*************** EOF
*** 4102,4113 ****
echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6
! echo "configure:4106: checking whether alloca needs Cray hooks" >&5
if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
! #line 4111 "configure"
#include "confdefs.h"
#if defined(CRAY) && ! defined(CRAY2)
webecray
--- 4103,4114 ----
echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6
! echo "configure:4107: checking whether alloca needs Cray hooks" >&5
if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
! #line 4112 "configure"
#include "confdefs.h"
#if defined(CRAY) && ! defined(CRAY2)
webecray
*************** echo "$ac_t""$ac_cv_os_cray" 1>&6
*** 4132,4143 ****
if test $ac_cv_os_cray = yes; then
for ac_func in _getb67 GETB67 getb67; do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
! echo "configure:4136: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
! #line 4141 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
--- 4133,4144 ----
if test $ac_cv_os_cray = yes; then
for ac_func in _getb67 GETB67 getb67; do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
! echo "configure:4137: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
! #line 4142 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
*************** $ac_func();
*** 4160,4166 ****
; return 0; }
EOF
! if { (eval echo configure:4164: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
--- 4161,4167 ----
; return 0; }
EOF
! if { (eval echo configure:4165: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
*************** done
*** 4187,4193 ****
fi
echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6
! echo "configure:4191: checking stack direction for C alloca" >&5
if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
--- 4188,4194 ----
fi
echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6
! echo "configure:4192: checking stack direction for C alloca" >&5
if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
*************** else
*** 4195,4201 ****
ac_cv_c_stack_direction=0
else
cat > conftest.$ac_ext <<EOF
! #line 4199 "configure"
#include "confdefs.h"
find_stack_direction ()
{
--- 4196,4202 ----
ac_cv_c_stack_direction=0
else
cat > conftest.$ac_ext <<EOF
! #line 4200 "configure"
#include "confdefs.h"
find_stack_direction ()
{
*************** main ()
*** 4214,4220 ****
exit (find_stack_direction() < 0);
}
EOF
! if { (eval echo configure:4218: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_c_stack_direction=1
else
--- 4215,4221 ----
exit (find_stack_direction() < 0);
}
EOF
! if { (eval echo configure:4219: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_c_stack_direction=1
else
*************** for ac_hdr in stdlib.h unistd.h sys/stat
*** 4239,4255 ****
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
! echo "configure:4243: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
! #line 4248 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
! { (eval echo configure:4253: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
--- 4240,4256 ----
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
! echo "configure:4244: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
! #line 4249 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
! { (eval echo configure:4254: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
*************** done
*** 4278,4289 ****
for ac_func in getpagesize
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
! echo "configure:4282: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
! #line 4287 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
--- 4279,4290 ----
for ac_func in getpagesize
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
! echo "configure:4283: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
! #line 4288 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
*************** $ac_func();
*** 4306,4312 ****
; return 0; }
EOF
! if { (eval echo configure:4310: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
--- 4307,4313 ----
; return 0; }
EOF
! if { (eval echo configure:4311: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
*************** fi
*** 4331,4337 ****
done
echo $ac_n "checking for working mmap""... $ac_c" 1>&6
! echo "configure:4335: checking for working mmap" >&5
if eval "test \"`echo '$''{'ac_cv_func_mmap_fixed_mapped'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
--- 4332,4338 ----
done
echo $ac_n "checking for working mmap""... $ac_c" 1>&6
! echo "configure:4336: checking for working mmap" >&5
if eval "test \"`echo '$''{'ac_cv_func_mmap_fixed_mapped'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
*************** else
*** 4339,4345 ****
ac_cv_func_mmap_fixed_mapped=no
else
cat > conftest.$ac_ext <<EOF
! #line 4343 "configure"
#include "confdefs.h"
/* Thanks to Mike Haertel and Jim Avera for this test.
--- 4340,4346 ----
ac_cv_func_mmap_fixed_mapped=no
else
cat > conftest.$ac_ext <<EOF
! #line 4344 "configure"
#include "confdefs.h"
/* Thanks to Mike Haertel and Jim Avera for this test.
*************** main()
*** 4492,4498 ****
}
EOF
! if { (eval echo configure:4496: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_func_mmap_fixed_mapped=yes
else
--- 4493,4499 ----
}
EOF
! if { (eval echo configure:4497: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_func_mmap_fixed_mapped=yes
else
*************** unistd.h values.h sys/param.h
*** 4520,4536 ****
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
! echo "configure:4524: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
! #line 4529 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
! { (eval echo configure:4534: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
--- 4521,4537 ----
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
! echo "configure:4525: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
! #line 4530 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
! { (eval echo configure:4535: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
*************** done
*** 4560,4571 ****
__argz_count __argz_stringify __argz_next
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
! echo "configure:4564: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
! #line 4569 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
--- 4561,4572 ----
__argz_count __argz_stringify __argz_next
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
! echo "configure:4565: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
! #line 4570 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
*************** $ac_func();
*** 4588,4594 ****
; return 0; }
EOF
! if { (eval echo configure:4592: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
--- 4589,4595 ----
; return 0; }
EOF
! if { (eval echo configure:4593: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
*************** done
*** 4617,4628 ****
for ac_func in stpcpy
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
! echo "configure:4621: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
! #line 4626 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
--- 4618,4629 ----
for ac_func in stpcpy
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
! echo "configure:4622: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
! #line 4627 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
*************** $ac_func();
*** 4645,4651 ****
; return 0; }
EOF
! if { (eval echo configure:4649: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
--- 4646,4652 ----
; return 0; }
EOF
! if { (eval echo configure:4650: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
*************** EOF
*** 4679,4697 ****
if test $ac_cv_header_locale_h = yes; then
echo $ac_n "checking for LC_MESSAGES""... $ac_c" 1>&6
! echo "configure:4683: checking for LC_MESSAGES" >&5
if eval "test \"`echo '$''{'am_cv_val_LC_MESSAGES'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
! #line 4688 "configure"
#include "confdefs.h"
#include <locale.h>
int main() {
return LC_MESSAGES
; return 0; }
EOF
! if { (eval echo configure:4695: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
am_cv_val_LC_MESSAGES=yes
else
--- 4680,4698 ----
if test $ac_cv_header_locale_h = yes; then
echo $ac_n "checking for LC_MESSAGES""... $ac_c" 1>&6
! echo "configure:4684: checking for LC_MESSAGES" >&5
if eval "test \"`echo '$''{'am_cv_val_LC_MESSAGES'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
! #line 4689 "configure"
#include "confdefs.h"
#include <locale.h>
int main() {
return LC_MESSAGES
; return 0; }
EOF
! if { (eval echo configure:4696: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
am_cv_val_LC_MESSAGES=yes
else
*************** EOF
*** 4712,4718 ****
fi
fi
echo $ac_n "checking whether NLS is requested""... $ac_c" 1>&6
! echo "configure:4716: checking whether NLS is requested" >&5
# Check whether --enable-nls or --disable-nls was given.
if test "${enable_nls+set}" = set; then
enableval="$enable_nls"
--- 4713,4719 ----
fi
fi
echo $ac_n "checking whether NLS is requested""... $ac_c" 1>&6
! echo "configure:4717: checking whether NLS is requested" >&5
# Check whether --enable-nls or --disable-nls was given.
if test "${enable_nls+set}" = set; then
enableval="$enable_nls"
*************** fi
*** 4732,4738 ****
EOF
echo $ac_n "checking whether included gettext is requested""... $ac_c" 1>&6
! echo "configure:4736: checking whether included gettext is requested" >&5
# Check whether --with-included-gettext or --without-included-gettext was given.
if test "${with_included_gettext+set}" = set; then
withval="$with_included_gettext"
--- 4733,4739 ----
EOF
echo $ac_n "checking whether included gettext is requested""... $ac_c" 1>&6
! echo "configure:4737: checking whether included gettext is requested" >&5
# Check whether --with-included-gettext or --without-included-gettext was given.
if test "${with_included_gettext+set}" = set; then
withval="$with_included_gettext"
*************** fi
*** 4751,4767 ****
ac_safe=`echo "libintl.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for libintl.h""... $ac_c" 1>&6
! echo "configure:4755: checking for libintl.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
! #line 4760 "configure"
#include "confdefs.h"
#include <libintl.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
! { (eval echo configure:4765: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
--- 4752,4768 ----
ac_safe=`echo "libintl.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for libintl.h""... $ac_c" 1>&6
! echo "configure:4756: checking for libintl.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
! #line 4761 "configure"
#include "confdefs.h"
#include <libintl.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
! { (eval echo configure:4766: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
*************** fi
*** 4778,4796 ****
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
echo "$ac_t""yes" 1>&6
echo $ac_n "checking for gettext in libc""... $ac_c" 1>&6
! echo "configure:4782: checking for gettext in libc" >&5
if eval "test \"`echo '$''{'gt_cv_func_gettext_libc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
! #line 4787 "configure"
#include "confdefs.h"
#include <libintl.h>
int main() {
return (int) gettext ("")
; return 0; }
EOF
! if { (eval echo configure:4794: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
gt_cv_func_gettext_libc=yes
else
--- 4779,4797 ----
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
echo "$ac_t""yes" 1>&6
echo $ac_n "checking for gettext in libc""... $ac_c" 1>&6
! echo "configure:4783: checking for gettext in libc" >&5
if eval "test \"`echo '$''{'gt_cv_func_gettext_libc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
! #line 4788 "configure"
#include "confdefs.h"
#include <libintl.h>
int main() {
return (int) gettext ("")
; return 0; }
EOF
! if { (eval echo configure:4795: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
gt_cv_func_gettext_libc=yes
else
*************** echo "$ac_t""$gt_cv_func_gettext_libc" 1
*** 4806,4812 ****
if test "$gt_cv_func_gettext_libc" != "yes"; then
echo $ac_n "checking for bindtextdomain in -lintl""... $ac_c" 1>&6
! echo "configure:4810: checking for bindtextdomain in -lintl" >&5
ac_lib_var=`echo intl'_'bindtextdomain | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
--- 4807,4813 ----
if test "$gt_cv_func_gettext_libc" != "yes"; then
echo $ac_n "checking for bindtextdomain in -lintl""... $ac_c" 1>&6
! echo "configure:4811: checking for bindtextdomain in -lintl" >&5
ac_lib_var=`echo intl'_'bindtextdomain | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
*************** else
*** 4814,4820 ****
ac_save_LIBS="$LIBS"
LIBS="-lintl $LIBS"
cat > conftest.$ac_ext <<EOF
! #line 4818 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
--- 4815,4821 ----
ac_save_LIBS="$LIBS"
LIBS="-lintl $LIBS"
cat > conftest.$ac_ext <<EOF
! #line 4819 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
*************** int main() {
*** 4825,4831 ****
bindtextdomain()
; return 0; }
EOF
! if { (eval echo configure:4829: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
--- 4826,4832 ----
bindtextdomain()
; return 0; }
EOF
! if { (eval echo configure:4830: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
*************** fi
*** 4841,4859 ****
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
echo "$ac_t""yes" 1>&6
echo $ac_n "checking for gettext in libintl""... $ac_c" 1>&6
! echo "configure:4845: checking for gettext in libintl" >&5
if eval "test \"`echo '$''{'gt_cv_func_gettext_libintl'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
! #line 4850 "configure"
#include "confdefs.h"
int main() {
return (int) gettext ("")
; return 0; }
EOF
! if { (eval echo configure:4857: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
gt_cv_func_gettext_libintl=yes
else
--- 4842,4860 ----
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
echo "$ac_t""yes" 1>&6
echo $ac_n "checking for gettext in libintl""... $ac_c" 1>&6
! echo "configure:4846: checking for gettext in libintl" >&5
if eval "test \"`echo '$''{'gt_cv_func_gettext_libintl'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
! #line 4851 "configure"
#include "confdefs.h"
int main() {
return (int) gettext ("")
; return 0; }
EOF
! if { (eval echo configure:4858: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
gt_cv_func_gettext_libintl=yes
else
*************** EOF
*** 4881,4887 ****
# Extract the first word of "msgfmt", so it can be a program name with args.
set dummy msgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
! echo "configure:4885: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
--- 4882,4888 ----
# Extract the first word of "msgfmt", so it can be a program name with args.
set dummy msgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
! echo "configure:4886: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
*************** fi
*** 4915,4926 ****
for ac_func in dcgettext
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
! echo "configure:4919: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
! #line 4924 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
--- 4916,4927 ----
for ac_func in dcgettext
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
! echo "configure:4920: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
! #line 4925 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
*************** $ac_func();
*** 4943,4949 ****
; return 0; }
EOF
! if { (eval echo configure:4947: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
--- 4944,4950 ----
; return 0; }
EOF
! if { (eval echo configure:4948: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
*************** done
*** 4970,4976 ****
# Extract the first word of "gmsgfmt", so it can be a program name with args.
set dummy gmsgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
! echo "configure:4974: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
--- 4971,4977 ----
# Extract the first word of "gmsgfmt", so it can be a program name with args.
set dummy gmsgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
! echo "configure:4975: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
*************** fi
*** 5006,5012 ****
# Extract the first word of "xgettext", so it can be a program name with args.
set dummy xgettext; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
! echo "configure:5010: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
--- 5007,5013 ----
# Extract the first word of "xgettext", so it can be a program name with args.
set dummy xgettext; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
! echo "configure:5011: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
*************** else
*** 5038,5044 ****
fi
cat > conftest.$ac_ext <<EOF
! #line 5042 "configure"
#include "confdefs.h"
int main() {
--- 5039,5045 ----
fi
cat > conftest.$ac_ext <<EOF
! #line 5043 "configure"
#include "confdefs.h"
int main() {
*************** extern int _nl_msg_cat_cntr;
*** 5046,5052 ****
return _nl_msg_cat_cntr
; return 0; }
EOF
! if { (eval echo configure:5050: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
CATOBJEXT=.gmo
DATADIRNAME=share
--- 5047,5053 ----
return _nl_msg_cat_cntr
; return 0; }
EOF
! if { (eval echo configure:5051: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
CATOBJEXT=.gmo
DATADIRNAME=share
*************** fi
*** 5078,5084 ****
# Extract the first word of "msgfmt", so it can be a program name with args.
set dummy msgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
! echo "configure:5082: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
--- 5079,5085 ----
# Extract the first word of "msgfmt", so it can be a program name with args.
set dummy msgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
! echo "configure:5083: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
*************** fi
*** 5112,5118 ****
# Extract the first word of "gmsgfmt", so it can be a program name with args.
set dummy gmsgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
! echo "configure:5116: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
--- 5113,5119 ----
# Extract the first word of "gmsgfmt", so it can be a program name with args.
set dummy gmsgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
! echo "configure:5117: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
*************** fi
*** 5148,5154 ****
# Extract the first word of "xgettext", so it can be a program name with args.
set dummy xgettext; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
! echo "configure:5152: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
--- 5149,5155 ----
# Extract the first word of "xgettext", so it can be a program name with args.
set dummy xgettext; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
! echo "configure:5153: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
*************** fi
*** 5238,5244 ****
LINGUAS=
else
echo $ac_n "checking for catalogs to be installed""... $ac_c" 1>&6
! echo "configure:5242: checking for catalogs to be installed" >&5
NEW_LINGUAS=
for lang in ${LINGUAS=$ALL_LINGUAS}; do
case "$ALL_LINGUAS" in
--- 5239,5245 ----
LINGUAS=
else
echo $ac_n "checking for catalogs to be installed""... $ac_c" 1>&6
! echo "configure:5243: checking for catalogs to be installed" >&5
NEW_LINGUAS=
for lang in ${LINGUAS=$ALL_LINGUAS}; do
case "$ALL_LINGUAS" in
*************** echo "configure:5242: checking for catal
*** 5266,5282 ****
if test "$CATOBJEXT" = ".cat"; then
ac_safe=`echo "linux/version.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for linux/version.h""... $ac_c" 1>&6
! echo "configure:5270: checking for linux/version.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
! #line 5275 "configure"
#include "confdefs.h"
#include <linux/version.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
! { (eval echo configure:5280: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
--- 5267,5283 ----
if test "$CATOBJEXT" = ".cat"; then
ac_safe=`echo "linux/version.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for linux/version.h""... $ac_c" 1>&6
! echo "configure:5271: checking for linux/version.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
! #line 5276 "configure"
#include "confdefs.h"
#include <linux/version.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
! { (eval echo configure:5281: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
*************** fi
*** 5339,5345 ****
echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
! echo "configure:5343: checking whether to enable maintainer-specific portions of Makefiles" >&5
# Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
if test "${enable_maintainer_mode+set}" = set; then
enableval="$enable_maintainer_mode"
--- 5340,5346 ----
echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
! echo "configure:5344: checking whether to enable maintainer-specific portions of Makefiles" >&5
# Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
if test "${enable_maintainer_mode+set}" = set; then
enableval="$enable_maintainer_mode"
*************** fi
*** 5364,5370 ****
echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
! echo "configure:5368: checking for executable suffix" >&5
if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
--- 5365,5371 ----
echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
! echo "configure:5369: checking for executable suffix" >&5
if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
*************** else
*** 5374,5380 ****
rm -f conftest*
echo 'int main () { return 0; }' > conftest.$ac_ext
ac_cv_exeext=
! if { (eval echo configure:5378: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
for file in conftest.*; do
case $file in
*.c | *.o | *.obj) ;;
--- 5375,5381 ----
rm -f conftest*
echo 'int main () { return 0; }' > conftest.$ac_ext
ac_cv_exeext=
! if { (eval echo configure:5379: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
for file in conftest.*; do
case $file in
*.c | *.o | *.obj) ;;
*************** for ac_hdr in string.h stdlib.h memory.h
*** 5399,5415 ****
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
! echo "configure:5403: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
! #line 5408 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
! { (eval echo configure:5413: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
--- 5400,5416 ----
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
! echo "configure:5404: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
! #line 5409 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
! { (eval echo configure:5414: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
*************** done
*** 5439,5445 ****
# Put this here so that autoconf's "cross-compiling" message doesn't confuse
# people who are not cross-compiling but are compiling cross-assemblers.
echo $ac_n "checking whether compiling a cross-assembler""... $ac_c" 1>&6
! echo "configure:5443: checking whether compiling a cross-assembler" >&5
if test "${host}" = "${target}"; then
cross_gas=no
else
--- 5440,5446 ----
# Put this here so that autoconf's "cross-compiling" message doesn't confuse
# people who are not cross-compiling but are compiling cross-assemblers.
echo $ac_n "checking whether compiling a cross-assembler""... $ac_c" 1>&6
! echo "configure:5444: checking whether compiling a cross-assembler" >&5
if test "${host}" = "${target}"; then
cross_gas=no
else
*************** echo "$ac_t""$cross_gas" 1>&6
*** 5454,5472 ****
# The Ultrix 4.2 mips builtin alloca declared by alloca.h only works
# for constant arguments. Useless!
echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6
! echo "configure:5458: checking for working alloca.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
! #line 5463 "configure"
#include "confdefs.h"
#include <alloca.h>
int main() {
char *p = alloca(2 * sizeof(int));
; return 0; }
EOF
! if { (eval echo configure:5470: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_header_alloca_h=yes
else
--- 5455,5473 ----
# The Ultrix 4.2 mips builtin alloca declared by alloca.h only works
# for constant arguments. Useless!
echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6
! echo "configure:5459: checking for working alloca.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
! #line 5464 "configure"
#include "confdefs.h"
#include <alloca.h>
int main() {
char *p = alloca(2 * sizeof(int));
; return 0; }
EOF
! if { (eval echo configure:5471: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_header_alloca_h=yes
else
*************** EOF
*** 5487,5498 ****
fi
echo $ac_n "checking for alloca""... $ac_c" 1>&6
! echo "configure:5491: checking for alloca" >&5
if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
! #line 5496 "configure"
#include "confdefs.h"
#ifdef __GNUC__
--- 5488,5499 ----
fi
echo $ac_n "checking for alloca""... $ac_c" 1>&6
! echo "configure:5492: checking for alloca" >&5
if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
! #line 5497 "configure"
#include "confdefs.h"
#ifdef __GNUC__
*************** int main() {
*** 5520,5526 ****
char *p = (char *) alloca(1);
; return 0; }
EOF
! if { (eval echo configure:5524: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_func_alloca_works=yes
else
--- 5521,5527 ----
char *p = (char *) alloca(1);
; return 0; }
EOF
! if { (eval echo configure:5525: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_func_alloca_works=yes
else
*************** EOF
*** 5552,5563 ****
echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6
! echo "configure:5556: checking whether alloca needs Cray hooks" >&5
if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
! #line 5561 "configure"
#include "confdefs.h"
#if defined(CRAY) && ! defined(CRAY2)
webecray
--- 5553,5564 ----
echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6
! echo "configure:5557: checking whether alloca needs Cray hooks" >&5
if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
! #line 5562 "configure"
#include "confdefs.h"
#if defined(CRAY) && ! defined(CRAY2)
webecray
*************** echo "$ac_t""$ac_cv_os_cray" 1>&6
*** 5582,5593 ****
if test $ac_cv_os_cray = yes; then
for ac_func in _getb67 GETB67 getb67; do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
! echo "configure:5586: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
! #line 5591 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
--- 5583,5594 ----
if test $ac_cv_os_cray = yes; then
for ac_func in _getb67 GETB67 getb67; do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
! echo "configure:5587: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
! #line 5592 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
*************** $ac_func();
*** 5610,5616 ****
; return 0; }
EOF
! if { (eval echo configure:5614: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
--- 5611,5617 ----
; return 0; }
EOF
! if { (eval echo configure:5615: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
*************** done
*** 5637,5643 ****
fi
echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6
! echo "configure:5641: checking stack direction for C alloca" >&5
if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
--- 5638,5644 ----
fi
echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6
! echo "configure:5642: checking stack direction for C alloca" >&5
if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
*************** else
*** 5645,5651 ****
ac_cv_c_stack_direction=0
else
cat > conftest.$ac_ext <<EOF
! #line 5649 "configure"
#include "confdefs.h"
find_stack_direction ()
{
--- 5646,5652 ----
ac_cv_c_stack_direction=0
else
cat > conftest.$ac_ext <<EOF
! #line 5650 "configure"
#include "confdefs.h"
find_stack_direction ()
{
*************** main ()
*** 5664,5670 ****
exit (find_stack_direction() < 0);
}
EOF
! if { (eval echo configure:5668: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_c_stack_direction=1
else
--- 5665,5671 ----
exit (find_stack_direction() < 0);
}
EOF
! if { (eval echo configure:5669: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_c_stack_direction=1
else
*************** EOF
*** 5686,5706 ****
fi
echo $ac_n "checking for inline""... $ac_c" 1>&6
! echo "configure:5690: checking for inline" >&5
if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_c_inline=no
for ac_kw in inline __inline__ __inline; do
cat > conftest.$ac_ext <<EOF
! #line 5697 "configure"
#include "confdefs.h"
int main() {
} $ac_kw foo() {
; return 0; }
EOF
! if { (eval echo configure:5704: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_inline=$ac_kw; break
else
--- 5687,5707 ----
fi
echo $ac_n "checking for inline""... $ac_c" 1>&6
! echo "configure:5691: checking for inline" >&5
if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_c_inline=no
for ac_kw in inline __inline__ __inline; do
cat > conftest.$ac_ext <<EOF
! #line 5698 "configure"
#include "confdefs.h"
int main() {
} $ac_kw foo() {
; return 0; }
EOF
! if { (eval echo configure:5705: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_inline=$ac_kw; break
else
*************** esac
*** 5730,5741 ****
for ac_func in unlink remove
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
! echo "configure:5734: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
! #line 5739 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
--- 5731,5742 ----
for ac_func in unlink remove
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
! echo "configure:5735: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
! #line 5740 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
*************** $ac_func();
*** 5758,5764 ****
; return 0; }
EOF
! if { (eval echo configure:5762: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
--- 5759,5765 ----
; return 0; }
EOF
! if { (eval echo configure:5763: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
*************** done
*** 5787,5798 ****
for ac_func in sbrk
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
! echo "configure:5791: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
! #line 5796 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
--- 5788,5799 ----
for ac_func in sbrk
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
! echo "configure:5792: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
! #line 5797 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
*************** $ac_func();
*** 5815,5821 ****
; return 0; }
EOF
! if { (eval echo configure:5819: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
--- 5816,5822 ----
; return 0; }
EOF
! if { (eval echo configure:5820: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
*************** case $host in
*** 5850,5856 ****
;;
*-ncr-sysv4.3*)
echo $ac_n "checking for _mwvalidcheckl in -lmw""... $ac_c" 1>&6
! echo "configure:5854: checking for _mwvalidcheckl in -lmw" >&5
ac_lib_var=`echo mw'_'_mwvalidcheckl | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
--- 5851,5857 ----
;;
*-ncr-sysv4.3*)
echo $ac_n "checking for _mwvalidcheckl in -lmw""... $ac_c" 1>&6
! echo "configure:5855: checking for _mwvalidcheckl in -lmw" >&5
ac_lib_var=`echo mw'_'_mwvalidcheckl | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
*************** else
*** 5858,5864 ****
ac_save_LIBS="$LIBS"
LIBS="-lmw $LIBS"
cat > conftest.$ac_ext <<EOF
! #line 5862 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
--- 5859,5865 ----
ac_save_LIBS="$LIBS"
LIBS="-lmw $LIBS"
cat > conftest.$ac_ext <<EOF
! #line 5863 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
*************** int main() {
*** 5869,5875 ****
_mwvalidcheckl()
; return 0; }
EOF
! if { (eval echo configure:5873: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
--- 5870,5876 ----
_mwvalidcheckl()
; return 0; }
EOF
! if { (eval echo configure:5874: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
*************** else
*** 5890,5896 ****
fi
echo $ac_n "checking for main in -lm""... $ac_c" 1>&6
! echo "configure:5894: checking for main in -lm" >&5
ac_lib_var=`echo m'_'main | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
--- 5891,5897 ----
fi
echo $ac_n "checking for main in -lm""... $ac_c" 1>&6
! echo "configure:5895: checking for main in -lm" >&5
ac_lib_var=`echo m'_'main | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
*************** else
*** 5898,5911 ****
ac_save_LIBS="$LIBS"
LIBS="-lm $LIBS"
cat > conftest.$ac_ext <<EOF
! #line 5902 "configure"
#include "confdefs.h"
int main() {
main()
; return 0; }
EOF
! if { (eval echo configure:5909: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
--- 5899,5912 ----
ac_save_LIBS="$LIBS"
LIBS="-lm $LIBS"
cat > conftest.$ac_ext <<EOF
! #line 5903 "configure"
#include "confdefs.h"
int main() {
main()
; return 0; }
EOF
! if { (eval echo configure:5910: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
*************** fi
*** 5928,5934 ****
;;
*)
echo $ac_n "checking for main in -lm""... $ac_c" 1>&6
! echo "configure:5932: checking for main in -lm" >&5
ac_lib_var=`echo m'_'main | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
--- 5929,5935 ----
;;
*)
echo $ac_n "checking for main in -lm""... $ac_c" 1>&6
! echo "configure:5933: checking for main in -lm" >&5
ac_lib_var=`echo m'_'main | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
*************** else
*** 5936,5949 ****
ac_save_LIBS="$LIBS"
LIBS="-lm $LIBS"
cat > conftest.$ac_ext <<EOF
! #line 5940 "configure"
#include "confdefs.h"
int main() {
main()
; return 0; }
EOF
! if { (eval echo configure:5947: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
--- 5937,5950 ----
ac_save_LIBS="$LIBS"
LIBS="-lm $LIBS"
cat > conftest.$ac_ext <<EOF
! #line 5941 "configure"
#include "confdefs.h"
int main() {
main()
; return 0; }
EOF
! if { (eval echo configure:5948: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
*************** esac
*** 5974,5985 ****
# enough, but on some of those systems, the assert macro relies on requoting
# working properly!
echo $ac_n "checking for working assert macro""... $ac_c" 1>&6
! echo "configure:5978: checking for working assert macro" >&5
if eval "test \"`echo '$''{'gas_cv_assert_ok'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
! #line 5983 "configure"
#include "confdefs.h"
#include <assert.h>
#include <stdio.h>
--- 5975,5986 ----
# enough, but on some of those systems, the assert macro relies on requoting
# working properly!
echo $ac_n "checking for working assert macro""... $ac_c" 1>&6
! echo "configure:5979: checking for working assert macro" >&5
if eval "test \"`echo '$''{'gas_cv_assert_ok'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
! #line 5984 "configure"
#include "confdefs.h"
#include <assert.h>
#include <stdio.h>
*************** assert (a == b
*** 5995,6001 ****
; return 0; }
EOF
! if { (eval echo configure:5999: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
gas_cv_assert_ok=yes
else
--- 5996,6002 ----
; return 0; }
EOF
! if { (eval echo configure:6000: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
gas_cv_assert_ok=yes
else
*************** gas_test_headers="
*** 6036,6047 ****
"
echo $ac_n "checking whether declaration is required for strstr""... $ac_c" 1>&6
! echo "configure:6040: checking whether declaration is required for strstr" >&5
if eval "test \"`echo '$''{'gas_cv_decl_needed_strstr'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
! #line 6045 "configure"
#include "confdefs.h"
$gas_test_headers
int main() {
--- 6037,6048 ----
"
echo $ac_n "checking whether declaration is required for strstr""... $ac_c" 1>&6
! echo "configure:6041: checking whether declaration is required for strstr" >&5
if eval "test \"`echo '$''{'gas_cv_decl_needed_strstr'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
! #line 6046 "configure"
#include "confdefs.h"
$gas_test_headers
int main() {
*************** x = (f) strstr;
*** 6052,6058 ****
; return 0; }
EOF
! if { (eval echo configure:6056: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
gas_cv_decl_needed_strstr=no
else
--- 6053,6059 ----
; return 0; }
EOF
! if { (eval echo configure:6057: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
gas_cv_decl_needed_strstr=no
else
*************** fi
*** 6073,6084 ****
echo $ac_n "checking whether declaration is required for malloc""... $ac_c" 1>&6
! echo "configure:6077: checking whether declaration is required for malloc" >&5
if eval "test \"`echo '$''{'gas_cv_decl_needed_malloc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
! #line 6082 "configure"
#include "confdefs.h"
$gas_test_headers
int main() {
--- 6074,6085 ----
echo $ac_n "checking whether declaration is required for malloc""... $ac_c" 1>&6
! echo "configure:6078: checking whether declaration is required for malloc" >&5
if eval "test \"`echo '$''{'gas_cv_decl_needed_malloc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
! #line 6083 "configure"
#include "confdefs.h"
$gas_test_headers
int main() {
*************** x = (f) malloc;
*** 6089,6095 ****
; return 0; }
EOF
! if { (eval echo configure:6093: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
gas_cv_decl_needed_malloc=no
else
--- 6090,6096 ----
; return 0; }
EOF
! if { (eval echo configure:6094: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
gas_cv_decl_needed_malloc=no
else
*************** fi
*** 6110,6121 ****
echo $ac_n "checking whether declaration is required for free""... $ac_c" 1>&6
! echo "configure:6114: checking whether declaration is required for free" >&5
if eval "test \"`echo '$''{'gas_cv_decl_needed_free'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
! #line 6119 "configure"
#include "confdefs.h"
$gas_test_headers
int main() {
--- 6111,6122 ----
echo $ac_n "checking whether declaration is required for free""... $ac_c" 1>&6
! echo "configure:6115: checking whether declaration is required for free" >&5
if eval "test \"`echo '$''{'gas_cv_decl_needed_free'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
! #line 6120 "configure"
#include "confdefs.h"
$gas_test_headers
int main() {
*************** x = (f) free;
*** 6126,6132 ****
; return 0; }
EOF
! if { (eval echo configure:6130: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
gas_cv_decl_needed_free=no
else
--- 6127,6133 ----
; return 0; }
EOF
! if { (eval echo configure:6131: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
gas_cv_decl_needed_free=no
else
*************** fi
*** 6147,6158 ****
echo $ac_n "checking whether declaration is required for sbrk""... $ac_c" 1>&6
! echo "configure:6151: checking whether declaration is required for sbrk" >&5
if eval "test \"`echo '$''{'gas_cv_decl_needed_sbrk'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
! #line 6156 "configure"
#include "confdefs.h"
$gas_test_headers
int main() {
--- 6148,6159 ----
echo $ac_n "checking whether declaration is required for sbrk""... $ac_c" 1>&6
! echo "configure:6152: checking whether declaration is required for sbrk" >&5
if eval "test \"`echo '$''{'gas_cv_decl_needed_sbrk'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
! #line 6157 "configure"
#include "confdefs.h"
$gas_test_headers
int main() {
*************** x = (f) sbrk;
*** 6163,6169 ****
; return 0; }
EOF
! if { (eval echo configure:6167: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
gas_cv_decl_needed_sbrk=no
else
--- 6164,6170 ----
; return 0; }
EOF
! if { (eval echo configure:6168: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
gas_cv_decl_needed_sbrk=no
else
*************** fi
*** 6184,6195 ****
echo $ac_n "checking whether declaration is required for environ""... $ac_c" 1>&6
! echo "configure:6188: checking whether declaration is required for environ" >&5
if eval "test \"`echo '$''{'gas_cv_decl_needed_environ'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
! #line 6193 "configure"
#include "confdefs.h"
$gas_test_headers
int main() {
--- 6185,6196 ----
echo $ac_n "checking whether declaration is required for environ""... $ac_c" 1>&6
! echo "configure:6189: checking whether declaration is required for environ" >&5
if eval "test \"`echo '$''{'gas_cv_decl_needed_environ'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
! #line 6194 "configure"
#include "confdefs.h"
$gas_test_headers
int main() {
*************** x = (f) environ;
*** 6200,6206 ****
; return 0; }
EOF
! if { (eval echo configure:6204: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
gas_cv_decl_needed_environ=no
else
--- 6201,6207 ----
; return 0; }
EOF
! if { (eval echo configure:6205: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
gas_cv_decl_needed_environ=no
else
*************** fi
*** 6224,6235 ****
# for it?
echo $ac_n "checking whether declaration is required for errno""... $ac_c" 1>&6
! echo "configure:6228: checking whether declaration is required for errno" >&5
if eval "test \"`echo '$''{'gas_cv_decl_needed_errno'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
! #line 6233 "configure"
#include "confdefs.h"
#ifdef HAVE_ERRNO_H
--- 6225,6236 ----
# for it?
echo $ac_n "checking whether declaration is required for errno""... $ac_c" 1>&6
! echo "configure:6229: checking whether declaration is required for errno" >&5
if eval "test \"`echo '$''{'gas_cv_decl_needed_errno'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
! #line 6234 "configure"
#include "confdefs.h"
#ifdef HAVE_ERRNO_H
*************** x = (f) errno;
*** 6244,6250 ****
; return 0; }
EOF
! if { (eval echo configure:6248: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
gas_cv_decl_needed_errno=no
else
--- 6245,6251 ----
; return 0; }
EOF
! if { (eval echo configure:6249: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
gas_cv_decl_needed_errno=no
else
Index: gas/configure.in
===================================================================
RCS file: /cvs/src/src/gas/configure.in,v
retrieving revision 1.115
diff -c -3 -p -r1.115 configure.in
*** gas/configure.in 9 Aug 2002 15:38:24 -0000 1.115
--- gas/configure.in 13 Aug 2002 18:50:22 -0000
*************** changequote([,])dnl
*** 461,466 ****
--- 461,467 ----
tic30-*-*aout*) fmt=aout bfd_gas=yes ;;
tic30-*-*coff*) fmt=coff bfd_gas=yes ;;
+ tic4x-*-* | c4x-*-*) fmt=coff bfd_gas=yes ;;
tic54x-*-* | c54x*-*-*) fmt=coff bfd_gas=yes need_libm=yes;;
tic80-*-*) fmt=coff ;;
Index: ld/ChangeLog
===================================================================
RCS file: /cvs/src/src/ld/ChangeLog,v
retrieving revision 1.744
diff -c -3 -p -r1.744 ChangeLog
*** ld/ChangeLog 13 Aug 2002 02:27:11 -0000 1.744
--- ld/ChangeLog 13 Aug 2002 18:50:24 -0000
***************
*** 1,3 ****
--- 1,9 ----
+ 2002-08-13 Svein E. Seldal <Svein.Seldal@solidas.com>
+
+ * Makefile.am: Added support for tic4x-*-*.
+ * configure.tgt: Added support for tic4x-*-*.
+ * Makefile.in: Regenerate.
+
2002-08-13 Alan Modra <amodra@bigpond.net.au>
* emulparams/elf32_dlx.sh (TARGET_PAGE_SIZE): Set to 1.
Index: ld/Makefile.am
===================================================================
RCS file: /cvs/src/src/ld/Makefile.am,v
retrieving revision 1.109
diff -c -3 -p -r1.109 Makefile.am
*** ld/Makefile.am 9 Aug 2002 15:38:24 -0000 1.109
--- ld/Makefile.am 13 Aug 2002 18:50:24 -0000
*************** ALL_EMULATIONS = \
*** 279,284 ****
--- 279,285 ----
esun4.o \
etic30aout.o \
etic30coff.o \
+ etic4xcoff.o \
etic54xcoff.o \
etic80coff.o \
evanilla.o \
*************** etic30aout.c: $(srcdir)/emulparams/tic30
*** 1069,1074 ****
--- 1070,1078 ----
etic30coff.c: $(srcdir)/emulparams/tic30coff.sh \
$(srcdir)/emultempl/generic.em $(srcdir)/scripttempl/tic30coff.sc ${GEN_DEPENDS}
${GENSCRIPTS} tic30coff "$(tdir_tic30coff)"
+ etic4xcoff.c: $(srcdir)/emulparams/tic4xcoff.sh \
+ $(srcdir)/emultempl/ticoff.em $(srcdir)/scripttempl/tic4xcoff.sc ${GEN_DEPENDS}
+ ${GENSCRIPTS} tic4xcoff "$(tdir_tic4xcoff)"
etic54xcoff.c: $(srcdir)/emulparams/tic54xcoff.sh \
$(srcdir)/emultempl/ticoff.em $(srcdir)/scripttempl/tic54xcoff.sc ${GEN_DEPENDS}
${GENSCRIPTS} tic54xcoff "$(tdir_tic54xcoff)"
Index: ld/Makefile.in
===================================================================
RCS file: /cvs/src/src/ld/Makefile.in,v
retrieving revision 1.118
diff -c -3 -p -r1.118 Makefile.in
*** ld/Makefile.in 9 Aug 2002 15:38:24 -0000 1.118
--- ld/Makefile.in 13 Aug 2002 18:50:25 -0000
*************** ALL_EMULATIONS = \
*** 390,395 ****
--- 390,396 ----
esun4.o \
etic30aout.o \
etic30coff.o \
+ etic4xcoff.o \
etic54xcoff.o \
etic80coff.o \
evanilla.o \
*************** etic30aout.c: $(srcdir)/emulparams/tic30
*** 1792,1797 ****
--- 1793,1801 ----
etic30coff.c: $(srcdir)/emulparams/tic30coff.sh \
$(srcdir)/emultempl/generic.em $(srcdir)/scripttempl/tic30coff.sc ${GEN_DEPENDS}
${GENSCRIPTS} tic30coff "$(tdir_tic30coff)"
+ etic4xcoff.c: $(srcdir)/emulparams/tic4xcoff.sh \
+ $(srcdir)/emultempl/ticoff.em $(srcdir)/scripttempl/tic4xcoff.sc ${GEN_DEPENDS}
+ ${GENSCRIPTS} tic4xcoff "$(tdir_tic4xcoff)"
etic54xcoff.c: $(srcdir)/emulparams/tic54xcoff.sh \
$(srcdir)/emultempl/ticoff.em $(srcdir)/scripttempl/tic54xcoff.sc ${GEN_DEPENDS}
${GENSCRIPTS} tic54xcoff "$(tdir_tic54xcoff)"
Index: ld/configure.tgt
===================================================================
RCS file: /cvs/src/src/ld/configure.tgt,v
retrieving revision 1.105
diff -c -3 -p -r1.105 configure.tgt
*** ld/configure.tgt 9 Aug 2002 15:38:24 -0000 1.105
--- ld/configure.tgt 13 Aug 2002 18:50:26 -0000
*************** rs6000-*-aix5*) targ_emul=aix5rs6 ;;
*** 501,506 ****
--- 501,507 ----
rs6000-*-aix*) targ_emul=aixrs6 ;;
tic30-*-*aout*) targ_emul=tic30aout ;;
tic30-*-*coff*) targ_emul=tic30coff ;;
+ tic4x-*-* | c4x-*-*) targ_emul=tic4xcoff ;;
tic54x-*-* | c54x*-*-*) targ_emul=tic54xcoff ;;
tic80-*-*) targ_emul=tic80coff ;;
v850-*-*) targ_emul=v850 ;;
Index: opcodes/ChangeLog
===================================================================
RCS file: /cvs/src/src/opcodes/ChangeLog,v
retrieving revision 1.472
diff -c -3 -p -r1.472 ChangeLog
*** opcodes/ChangeLog 9 Aug 2002 15:07:56 -0000 1.472
--- opcodes/ChangeLog 13 Aug 2002 18:50:27 -0000
***************
*** 1,3 ****
--- 1,8 ----
+ 2002-08-13 Svein E. Seldal <Svein.Seldal@solidas.com>
+
+ * Makefile.am: Added support for tic4x-*-*
+ * configure.in: Added support for tic4x-*-*
+
2002-08-09 Nick Clifton <nickc@redhat.com>
* po/sv.po: Updated Swedish translation.
Index: opcodes/Makefile.am
===================================================================
RCS file: /cvs/src/src/opcodes/Makefile.am,v
retrieving revision 1.56
diff -c -3 -p -r1.56 Makefile.am
*** opcodes/Makefile.am 23 Jul 2002 12:42:31 -0000 1.56
--- opcodes/Makefile.am 13 Aug 2002 18:50:28 -0000
*************** CFILES = \
*** 140,145 ****
--- 140,146 ----
sparc-dis.c \
sparc-opc.c \
tic30-dis.c \
+ tic4x-dis.c \
tic54x-dis.c \
tic54x-opc.c \
tic80-dis.c \
*************** ALL_MACHINES = \
*** 243,248 ****
--- 244,250 ----
sparc-dis.lo \
sparc-opc.lo \
tic30-dis.lo \
+ tic4x-dis.lo \
tic54x-dis.lo \
tic54x-opc.lo \
tic80-dis.lo \
*************** sparc-opc.lo: sparc-opc.c sysdep.h confi
*** 721,726 ****
--- 723,730 ----
$(INCDIR)/opcode/sparc.h
tic30-dis.lo: tic30-dis.c sysdep.h config.h $(INCDIR)/ansidecl.h \
$(INCDIR)/dis-asm.h $(BFD_H) $(INCDIR)/symcat.h $(INCDIR)/opcode/tic30.h
+ tic4x-dis.lo: tic4x-dis.c sysdep.h config.h $(INCDIR)/ansidecl.h \
+ $(INCDIR)/dis-asm.h $(BFD_H) $(INCDIR)/opcode/tic4x.h
tic54x-dis.lo: tic54x-dis.c sysdep.h config.h $(INCDIR)/ansidecl.h \
$(INCDIR)/dis-asm.h $(BFD_H) $(INCDIR)/symcat.h $(INCDIR)/opcode/tic54x.h \
$(INCDIR)/coff/tic54x.h $(INCDIR)/coff/ti.h
Index: opcodes/Makefile.in
===================================================================
RCS file: /cvs/src/src/opcodes/Makefile.in,v
retrieving revision 1.62
diff -c -3 -p -r1.62 Makefile.in
*** opcodes/Makefile.in 23 Jul 2002 12:42:32 -0000 1.62
--- opcodes/Makefile.in 13 Aug 2002 18:50:28 -0000
*************** CFILES = \
*** 251,256 ****
--- 251,257 ----
sparc-dis.c \
sparc-opc.c \
tic30-dis.c \
+ tic4x-dis.c \
tic54x-dis.c \
tic54x-opc.c \
tic80-dis.c \
*************** ALL_MACHINES = \
*** 355,360 ****
--- 356,362 ----
sparc-dis.lo \
sparc-opc.lo \
tic30-dis.lo \
+ tic4x-dis.lo \
tic54x-dis.lo \
tic54x-opc.lo \
tic80-dis.lo \
*************** acinclude.m4 aclocal.m4 config.in config
*** 447,453 ****
DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
! TAR = tar
GZIP_ENV = --best
SOURCES = libopcodes.a.c $(libopcodes_la_SOURCES)
OBJECTS = libopcodes.a.$(OBJEXT) $(libopcodes_la_OBJECTS)
--- 449,455 ----
DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
! TAR = gtar
GZIP_ENV = --best
SOURCES = libopcodes.a.c $(libopcodes_la_SOURCES)
OBJECTS = libopcodes.a.$(OBJEXT) $(libopcodes_la_OBJECTS)
*************** sparc-opc.lo: sparc-opc.c sysdep.h confi
*** 1217,1222 ****
--- 1219,1226 ----
$(INCDIR)/opcode/sparc.h
tic30-dis.lo: tic30-dis.c sysdep.h config.h $(INCDIR)/ansidecl.h \
$(INCDIR)/dis-asm.h $(BFD_H) $(INCDIR)/symcat.h $(INCDIR)/opcode/tic30.h
+ tic4x-dis.lo: tic4x-dis.c sysdep.h config.h $(INCDIR)/ansidecl.h \
+ $(INCDIR)/dis-asm.h $(BFD_H) $(INCDIR)/opcode/tic4x.h
tic54x-dis.lo: tic54x-dis.c sysdep.h config.h $(INCDIR)/ansidecl.h \
$(INCDIR)/dis-asm.h $(BFD_H) $(INCDIR)/symcat.h $(INCDIR)/opcode/tic54x.h \
$(INCDIR)/coff/tic54x.h $(INCDIR)/coff/ti.h
Index: opcodes/configure
===================================================================
RCS file: /cvs/src/src/opcodes/configure,v
retrieving revision 1.52
diff -c -3 -p -r1.52 configure
*** opcodes/configure 23 Jul 2002 09:58:05 -0000 1.52
--- opcodes/configure 13 Aug 2002 18:50:29 -0000
*************** if test x${all_targets} = xfalse ; then
*** 4654,4659 ****
--- 4654,4660 ----
bfd_sparc_arch) ta="$ta sparc-dis.lo sparc-opc.lo" ;;
bfd_tahoe_arch) ;;
bfd_tic30_arch) ta="$ta tic30-dis.lo" ;;
+ bfd_tic4x_arch) ta="$ta tic4x-dis.lo" ;;
bfd_tic54x_arch) ta="$ta tic54x-dis.lo tic54x-opc.lo" ;;
bfd_tic80_arch) ta="$ta tic80-dis.lo tic80-opc.lo" ;;
bfd_v850_arch) ta="$ta v850-opc.lo v850-dis.lo" ;;
Index: opcodes/configure.in
===================================================================
RCS file: /cvs/src/src/opcodes/configure.in,v
retrieving revision 1.41
diff -c -3 -p -r1.41 configure.in
*** opcodes/configure.in 23 Jul 2002 09:58:05 -0000 1.41
--- opcodes/configure.in 13 Aug 2002 18:50:29 -0000
*************** if test x${all_targets} = xfalse ; then
*** 229,234 ****
--- 229,235 ----
bfd_sparc_arch) ta="$ta sparc-dis.lo sparc-opc.lo" ;;
bfd_tahoe_arch) ;;
bfd_tic30_arch) ta="$ta tic30-dis.lo" ;;
+ bfd_tic4x_arch) ta="$ta tic4x-dis.lo" ;;
bfd_tic54x_arch) ta="$ta tic54x-dis.lo tic54x-opc.lo" ;;
bfd_tic80_arch) ta="$ta tic80-dis.lo tic80-opc.lo" ;;
bfd_v850_arch) ta="$ta v850-opc.lo v850-dis.lo" ;;