This is the mail archive of the
binutils@sources.redhat.com
mailing list for the binutils project.
[PATCH, arm] Support for Thumb PLT entries with interwork
- From: Adam Nemet <anemet at Lnxw dot COM>
- To: Richard dot Earnshaw at arm dot com
- Cc: binutils at sources dot redhat dot com
- Date: 23 Jul 2002 01:07:20 -0700
- Subject: [PATCH, arm] Support for Thumb PLT entries with interwork
- References: <200207191450.PAA23400@cam-mail2.cambridge.arm.com>
Richard,
I updated the patch based on your comments. Here is a list of changes
since the last version of this patch.
* I removed the --thumb-plt switch.
* I removed the DT_INIT/FINI part. I will submit a separate patch for
those parts later.
* There is a new section called .plt.thumb. It holds the PLT entries
that refer to Thumb functions.
* The type of the PLT entry follows the type of the function it refers
to. For an undefined function, I generate the same type as the type
of the code where the function was first referenced.
I gcc-regtested this patch with the combinations of -marm/-mthumb and
-fno-pic/-fPIC on arm-elf. I ran the ld testsuite. I also built
binutils with --enable-targets=all.
For interwork, with this patch ld generates the proper .plt(.thumb)
entries. However, stub generation seems to require more tweaking in
order to work with PLT entries. In an upcoming patch I will address
those issues too.
Please apply if OK.
Adam
bfd/ChangeLog:
2002-07-23 Adam Nemet <anemet@lnxw.com>
* elf32-arm.h (ARM_PLT_ENTRY_SIZE): Rename PLT_ENTRY_SIZE.
(THUMB_PLT_ENTRY_SIZE): New macro.
(PLT_ENTRY_SIZE): Return the appropriate *_PLT_ENTRY_SIZE.
(elf32_arm_plt0_entry): Rename PLT_ENTRY_SIZE to
ARM_PLT_ENTRY_SIZE.
(elf32_arm_plt_entry): Likewise.
(elf_backend_plt_header_size): Likewise.
(elf32_thumb_plt0_entry): New global.
(elf32_arm_finish_dynamic_sections): Use it. Put Thumb entries
into .plt.thumb.
(elf32_thumb_plt_entry): New global.
(elf32_arm_finish_dynamic_symbol): Use it. Use .thumb.plt for
Thumb entries. Set the bottom bit of the corresponding GOT entry
for a Thumb PLT entry.
(struct elf32_arm_plt_entry_info): New structure.
(struct elf32_arm_link_hash_entry, plt_info): New member of this
type.
(elf32_arm_link_hash_newfunc): Initialize new member.
(elf32_arm_final_link_relocate, R_ARM_THM_PC22 case): Handle
relocations against the PLT.
(elf32_arm_check_relocs, case R_ARM_PLT32 case): Set
first_rel_type if this is the first time we encounter the symbol.
(elf32_arm_check_relocs, case R_ARM_THM_PC22 case): New case.
Determine if relocation needs a PLT entry. Set first_rel_type if
this is the first time we encounter the symbol
(elf32_arm_adjust_dynamic_symbol): Create PLT entries for Thumb
functions as well.
(elf32_arm_size_dynamic_sections): Handle .plt.thumb like .plt.
(elf32_arm_create_dynamic_sections): New function. Create the
.plt.thumb section.
(elf_backend_create_dynamic_sections): Call it.
ld/ChangeLog:
2002-07-23 Adam Nemet <anemet@lnxw.com>
* emulparams/armelf.sh (OTHER_PLT_SECTIONS): New variable. Set it
to .plt.thumb.
* scripttempl/elf.sc: Comment it. Use the same way as ${PLT} is
used.
Index: bfd/elf32-arm.h
===================================================================
RCS file: /cvs/src/src/bfd/elf32-arm.h,v
retrieving revision 1.87
diff -c -p -r1.87 elf32-arm.h
*** bfd/elf32-arm.h 7 Jul 2002 09:10:40 -0000 1.87
--- bfd/elf32-arm.h 23 Jul 2002 07:41:40 -0000
*************** static struct bfd_hash_entry * elf32_arm
*** 84,89 ****
--- 84,91 ----
static void arm_add_to_rel
PARAMS ((bfd *, bfd_byte *, reloc_howto_type *, bfd_signed_vma));
#endif
+ static boolean elf32_arm_create_dynamic_sections
+ PARAMS ((bfd *, struct bfd_link_info *));
boolean bfd_elf32_arm_allocate_interworking_sections
PARAMS ((struct bfd_link_info *));
*************** static enum elf_reloc_type_class elf32_a
*** 111,123 ****
#define ELF_DYNAMIC_INTERPRETER "/usr/lib/ld.so.1"
/* The size in bytes of an entry in the procedure linkage table. */
! #define PLT_ENTRY_SIZE 16
/* The first entry in a procedure linkage table looks like
this. It is set up so that any shared library function that is
called before the relocation has been set up calls the dynamic
linker first. */
! static const bfd_vma elf32_arm_plt0_entry [PLT_ENTRY_SIZE / 4] =
{
0xe52de004, /* str lr, [sp, #-4]! */
0xe59fe010, /* ldr lr, [pc, #16] */
--- 113,128 ----
#define ELF_DYNAMIC_INTERPRETER "/usr/lib/ld.so.1"
/* The size in bytes of an entry in the procedure linkage table. */
! #define ARM_PLT_ENTRY_SIZE 16
! #define THUMB_PLT_ENTRY_SIZE 20
! #define PLT_ENTRY_SIZE(ARM) \
! ((ARM) ? ARM_PLT_ENTRY_SIZE : THUMB_PLT_ENTRY_SIZE)
/* The first entry in a procedure linkage table looks like
this. It is set up so that any shared library function that is
called before the relocation has been set up calls the dynamic
linker first. */
! static const bfd_vma elf32_arm_plt0_entry [ARM_PLT_ENTRY_SIZE / 4] =
{
0xe52de004, /* str lr, [sp, #-4]! */
0xe59fe010, /* ldr lr, [pc, #16] */
*************** static const bfd_vma elf32_arm_plt0_entr
*** 125,139 ****
0xe5bef008 /* ldr pc, [lr, #8]! */
};
/* Subsequent entries in a procedure linkage table look like
this. */
! static const bfd_vma elf32_arm_plt_entry [PLT_ENTRY_SIZE / 4] =
{
0xe59fc004, /* ldr ip, [pc, #4] */
0xe08fc00c, /* add ip, pc, ip */
0xe59cf000, /* ldr pc, [ip] */
0x00000000 /* offset to symbol in got */
};
/* The ARM linker needs to keep track of the number of relocs that it
decides to copy in check_relocs for each symbol. This is so that
--- 130,177 ----
0xe5bef008 /* ldr pc, [lr, #8]! */
};
+ static const insn16 elf32_thumb_plt0_entry [THUMB_PLT_ENTRY_SIZE / 2] =
+ {
+ 0xb500, /* push {lr} */
+ 0xb082, /* sub sp, #8 */
+ 0x9000, /* str r0, [sp] */
+ 0x4807, /* ldr r0, [pc, #28] */
+ 0x300c, /* add r0, #12 */
+ 0x4478, /* add r0, pc */
+ 0x4686, /* mov lr, r0 */
+ 0x6800, /* ldr r0, [r0] */
+ 0x9001, /* str r0, [sp, #4] */
+ 0xbd01 /* pop {r0, pc} */
+ };
+
/* Subsequent entries in a procedure linkage table look like
this. */
! static const bfd_vma elf32_arm_plt_entry [ARM_PLT_ENTRY_SIZE / 4] =
{
0xe59fc004, /* ldr ip, [pc, #4] */
0xe08fc00c, /* add ip, pc, ip */
0xe59cf000, /* ldr pc, [ip] */
0x00000000 /* offset to symbol in got */
};
+
+ /* Note that on ARMv5 and above unlike the ARM PLT entries, the Thumb
+ entry can switch mode depending on the corresponding address in the
+ GOT. The dynamic linker should set or clear the last bit of the
+ address in the GOT accordingly. */
+
+ static const insn16 elf32_thumb_plt_entry [THUMB_PLT_ENTRY_SIZE / 2] =
+ {
+ 0xb082, /* sub sp, #8 */
+ 0x9000, /* str r0, [sp] */
+ 0x4802, /* ldr r0, [pc, #8] */
+ 0x4478, /* add r0, pc */
+ 0x4684, /* mov ip, r0 */
+ 0x6800, /* ldr r0, [r0] */
+ 0x9001, /* str r0, [sp, #4] */
+ 0xbd01, /* pop {r0, pc} */
+ 0x0000, /* offset to symbol in got */
+ 0x0000
+ };
/* The ARM linker needs to keep track of the number of relocs that it
decides to copy in check_relocs for each symbol. This is so that
*************** struct elf32_arm_pcrel_relocs_copied
*** 153,158 ****
--- 191,215 ----
bfd_size_type count;
};
+
+ /* We can generate Thumb or ARM PLT entries. This structure holds
+ additional information for symbols that have corresponding PLT
+ entries. */
+
+ struct elf32_arm_plt_entry_info
+ {
+ /* The first relocation type referring to this PLT entry. Used to
+ determine the type of the entry if the symbol is undefined. */
+ long first_rel_type;
+
+ /* True if we decided to emit the ARM version of the PLT entry for
+ this symbol. Otherwise the entry is Thumb. */
+ boolean arm_plt;
+
+ /* The offset of the corresponding .got.plt entry. */
+ bfd_vma got_plt_offset;
+ };
+
/* Arm ELF linker hash entry. */
struct elf32_arm_link_hash_entry
{
*************** struct elf32_arm_link_hash_entry
*** 160,165 ****
--- 217,224 ----
/* Number of PC relative relocs copied for this symbol. */
struct elf32_arm_pcrel_relocs_copied * pcrel_relocs_copied;
+
+ struct elf32_arm_plt_entry_info plt_info;
};
/* Declare this now that the above structures are defined. */
*************** elf32_arm_link_hash_newfunc (entry, tabl
*** 222,228 ****
_bfd_elf_link_hash_newfunc ((struct bfd_hash_entry *) ret,
table, string));
if (ret != (struct elf32_arm_link_hash_entry *) NULL)
! ret->pcrel_relocs_copied = NULL;
return (struct bfd_hash_entry *) ret;
}
--- 281,290 ----
_bfd_elf_link_hash_newfunc ((struct bfd_hash_entry *) ret,
table, string));
if (ret != (struct elf32_arm_link_hash_entry *) NULL)
! {
! ret->pcrel_relocs_copied = NULL;
! ret->plt_info.first_rel_type = R_ARM_NONE;
! }
return (struct bfd_hash_entry *) ret;
}
*************** elf32_arm_final_link_relocate (howto, in
*** 1058,1063 ****
--- 1120,1126 ----
bfd_vma * local_got_offsets;
asection * sgot = NULL;
asection * splt = NULL;
+ asection * splt_thumb = NULL;
asection * sreloc = NULL;
bfd_vma addend;
bfd_signed_vma signed_addend;
*************** elf32_arm_final_link_relocate (howto, in
*** 1082,1087 ****
--- 1145,1151 ----
{
sgot = bfd_get_section_by_name (dynobj, ".got");
splt = bfd_get_section_by_name (dynobj, ".plt");
+ splt_thumb = bfd_get_section_by_name (dynobj, ".plt.thumb");
}
symtab_hdr = & elf_tdata (input_bfd)->symtab_hdr;
sym_hashes = elf_sym_hashes (input_bfd);
*************** elf32_arm_final_link_relocate (howto, in
*** 1407,1412 ****
--- 1471,1484 ----
signed_addend = addend;
}
#endif
+
+ /* If value is zero then we are linking a shared object and
+ this is a reference to an externally visible symbol. */
+ if (h != NULL && h->plt.offset != (bfd_vma) -1 && value == 0)
+ value = (splt_thumb->output_section->vma
+ + splt_thumb->output_offset
+ + h->plt.offset);
+
#ifndef OLD_ARM_ABI
if (r_type == R_ARM_THM_XPC22)
{
*************** elf32_arm_check_relocs (abfd, info, sec,
*** 2723,2728 ****
--- 2795,2825 ----
continue;
h->elf_link_hash_flags |= ELF_LINK_HASH_NEEDS_PLT;
+ {
+ struct elf32_arm_link_hash_entry *eh;
+
+ eh = (struct elf32_arm_link_hash_entry *) h;
+ if (eh->plt_info.first_rel_type == R_ARM_NONE)
+ eh->plt_info.first_rel_type = R_ARM_PLT32;
+ }
+ break;
+
+ case R_ARM_THM_PC22:
+ /* Since there is no PLT32 for Thumb if we are creating a
+ shared library and this is an externally visible symbol
+ then add it to the PLT. */
+ if (info->shared && h != NULL && h->dynindx != -1
+ && (! info->symbolic
+ || (h->elf_link_hash_flags
+ & ELF_LINK_HASH_DEF_REGULAR) == 0))
+ {
+ struct elf32_arm_link_hash_entry *eh;
+
+ eh = (struct elf32_arm_link_hash_entry *) h;
+ h->elf_link_hash_flags |= ELF_LINK_HASH_NEEDS_PLT;
+ if (eh->plt_info.first_rel_type == R_ARM_NONE)
+ eh->plt_info.first_rel_type = R_ARM_THM_PC22;
+ }
break;
case R_ARM_ABS32:
*************** elf32_arm_adjust_dynamic_symbol (info, h
*** 2955,2963 ****
/* If this is a function, put it in the procedure linkage table. We
will fill in the contents of the procedure linkage table later,
when we know the address of the .got section. */
! if (h->type == STT_FUNC
|| (h->elf_link_hash_flags & ELF_LINK_HASH_NEEDS_PLT) != 0)
{
if (! info->shared
&& (h->elf_link_hash_flags & ELF_LINK_HASH_DEF_DYNAMIC) == 0
&& (h->elf_link_hash_flags & ELF_LINK_HASH_REF_DYNAMIC) == 0)
--- 3052,3067 ----
/* If this is a function, put it in the procedure linkage table. We
will fill in the contents of the procedure linkage table later,
when we know the address of the .got section. */
! if (h->type == STT_FUNC || h->type == STT_ARM_TFUNC
|| (h->elf_link_hash_flags & ELF_LINK_HASH_NEEDS_PLT) != 0)
{
+ struct elf32_arm_plt_entry_info *plt_info;
+
+ plt_info = &((struct elf32_arm_link_hash_entry *) h)->plt_info;
+ plt_info->arm_plt = ! (h->type == STT_ARM_TFUNC ||
+ (h->type != STT_ARM_TFUNC && h->type != STT_FUNC
+ && plt_info->first_rel_type == R_ARM_THM_PC22));
+
if (! info->shared
&& (h->elf_link_hash_flags & ELF_LINK_HASH_DEF_DYNAMIC) == 0
&& (h->elf_link_hash_flags & ELF_LINK_HASH_REF_DYNAMIC) == 0)
*************** elf32_arm_adjust_dynamic_symbol (info, h
*** 2978,2990 ****
return false;
}
! s = bfd_get_section_by_name (dynobj, ".plt");
BFD_ASSERT (s != NULL);
! /* If this is the first .plt entry, make room for the special
first entry. */
if (s->_raw_size == 0)
! s->_raw_size += PLT_ENTRY_SIZE;
/* If this symbol is not defined in a regular file, and we are
not generating a shared library, then set the symbol to this
--- 3082,3095 ----
return false;
}
! s = bfd_get_section_by_name (dynobj,
! plt_info->arm_plt ? ".plt" : ".plt.thumb");
BFD_ASSERT (s != NULL);
! /* If this is the first PLT entry, make room for the special
first entry. */
if (s->_raw_size == 0)
! s->_raw_size += PLT_ENTRY_SIZE (plt_info->arm_plt);
/* If this symbol is not defined in a regular file, and we are
not generating a shared library, then set the symbol to this
*************** elf32_arm_adjust_dynamic_symbol (info, h
*** 3001,3012 ****
h->plt.offset = s->_raw_size;
/* Make room for this entry. */
! s->_raw_size += PLT_ENTRY_SIZE;
/* We also need to make an entry in the .got.plt section, which
will be placed in the .got section by the linker script. */
s = bfd_get_section_by_name (dynobj, ".got.plt");
BFD_ASSERT (s != NULL);
s->_raw_size += 4;
/* We also need to make an entry in the .rel.plt section. */
--- 3106,3118 ----
h->plt.offset = s->_raw_size;
/* Make room for this entry. */
! s->_raw_size += PLT_ENTRY_SIZE (plt_info->arm_plt);
/* We also need to make an entry in the .got.plt section, which
will be placed in the .got section by the linker script. */
s = bfd_get_section_by_name (dynobj, ".got.plt");
BFD_ASSERT (s != NULL);
+ plt_info->got_plt_offset = s->_raw_size;
s->_raw_size += 4;
/* We also need to make an entry in the .rel.plt section. */
*************** elf32_arm_size_dynamic_sections (output_
*** 3157,3163 ****
strip = false;
! if (strcmp (name, ".plt") == 0)
{
if (s->_raw_size == 0)
{
--- 3263,3270 ----
strip = false;
! /* Match .plt.thumb as well. */
! if (strncmp (name, ".plt", 4) == 0)
{
if (s->_raw_size == 0)
{
*************** elf32_arm_finish_dynamic_symbol (output_
*** 3317,3327 ****
if (h->plt.offset != (bfd_vma) -1)
{
asection * splt;
asection * sgot;
asection * srel;
! bfd_vma plt_index;
! bfd_vma got_offset;
Elf_Internal_Rel rel;
/* This symbol has an entry in the procedure linkage table. Set
it up. */
--- 3424,3435 ----
if (h->plt.offset != (bfd_vma) -1)
{
asection * splt;
+ asection * splt_thumb;
asection * sgot;
asection * srel;
! bfd_vma rel_index;
Elf_Internal_Rel rel;
+ struct elf32_arm_plt_entry_info *plt_info;
/* This symbol has an entry in the procedure linkage table. Set
it up. */
*************** elf32_arm_finish_dynamic_symbol (output_
*** 3329,3379 ****
BFD_ASSERT (h->dynindx != -1);
splt = bfd_get_section_by_name (dynobj, ".plt");
sgot = bfd_get_section_by_name (dynobj, ".got.plt");
srel = bfd_get_section_by_name (dynobj, ".rel.plt");
! BFD_ASSERT (splt != NULL && sgot != NULL && srel != NULL);
! /* Get the index in the procedure linkage table which
! corresponds to this symbol. This is the index of this symbol
! in all the symbols for which we are making plt entries. The
! first entry in the procedure linkage table is reserved. */
! plt_index = h->plt.offset / PLT_ENTRY_SIZE - 1;
!
! /* Get the offset into the .got table of the entry that
! corresponds to this function. Each .got entry is 4 bytes.
! The first three are reserved. */
! got_offset = (plt_index + 3) * 4;
/* Fill in the entry in the procedure linkage table. */
! bfd_put_32 (output_bfd, elf32_arm_plt_entry[0],
! splt->contents + h->plt.offset + 0);
! bfd_put_32 (output_bfd, elf32_arm_plt_entry[1],
! splt->contents + h->plt.offset + 4);
! bfd_put_32 (output_bfd, elf32_arm_plt_entry[2],
! splt->contents + h->plt.offset + 8);
! bfd_put_32 (output_bfd,
(sgot->output_section->vma
+ sgot->output_offset
! + got_offset
- splt->output_section->vma
- splt->output_offset
- h->plt.offset - 12),
splt->contents + h->plt.offset + 12);
! /* Fill in the entry in the global offset table. */
! bfd_put_32 (output_bfd,
! (splt->output_section->vma
! + splt->output_offset),
! sgot->contents + got_offset);
/* Fill in the entry in the .rel.plt section. */
rel.r_offset = (sgot->output_section->vma
+ sgot->output_offset
! + got_offset);
rel.r_info = ELF32_R_INFO (h->dynindx, R_ARM_JUMP_SLOT);
bfd_elf32_swap_reloc_out (output_bfd, &rel,
((Elf32_External_Rel *) srel->contents
! + plt_index));
if ((h->elf_link_hash_flags & ELF_LINK_HASH_DEF_REGULAR) == 0)
{
--- 3437,3524 ----
BFD_ASSERT (h->dynindx != -1);
splt = bfd_get_section_by_name (dynobj, ".plt");
+ splt_thumb = bfd_get_section_by_name (dynobj, ".plt.thumb");
sgot = bfd_get_section_by_name (dynobj, ".got.plt");
srel = bfd_get_section_by_name (dynobj, ".rel.plt");
! BFD_ASSERT (splt != NULL && splt_thumb != NULL && sgot != NULL
! && srel != NULL);
! plt_info = &((struct elf32_arm_link_hash_entry *) h)->plt_info;
!
! /* Get the index in the relocation table that corresponds to the
! entry in the global offset table. */
! rel_index = plt_info->got_plt_offset / 4 - 3;
/* Fill in the entry in the procedure linkage table. */
!
! if (plt_info->arm_plt)
! {
! bfd_put_32 (output_bfd, elf32_arm_plt_entry[0],
! splt->contents + h->plt.offset + 0);
! bfd_put_32 (output_bfd, elf32_arm_plt_entry[1],
! splt->contents + h->plt.offset + 4);
! bfd_put_32 (output_bfd, elf32_arm_plt_entry[2],
! splt->contents + h->plt.offset + 8);
!
! bfd_put_32 (output_bfd,
(sgot->output_section->vma
+ sgot->output_offset
! + plt_info->got_plt_offset
- splt->output_section->vma
- splt->output_offset
- h->plt.offset - 12),
splt->contents + h->plt.offset + 12);
! /* Fill in the entry in the global offset table. */
! bfd_put_32 (output_bfd,
! (splt->output_section->vma
! + splt->output_offset),
! sgot->contents + plt_info->got_plt_offset);
! }
! else
! {
! bfd_put_16 (output_bfd, (bfd_vma) elf32_thumb_plt_entry[0],
! splt_thumb->contents + h->plt.offset + 0);
! bfd_put_16 (output_bfd, (bfd_vma) elf32_thumb_plt_entry[1],
! splt_thumb->contents + h->plt.offset + 2);
! bfd_put_16 (output_bfd, (bfd_vma) elf32_thumb_plt_entry[2],
! splt_thumb->contents + h->plt.offset + 4);
! bfd_put_16 (output_bfd, (bfd_vma) elf32_thumb_plt_entry[3],
! splt_thumb->contents + h->plt.offset + 6);
! bfd_put_16 (output_bfd, (bfd_vma) elf32_thumb_plt_entry[4],
! splt_thumb->contents + h->plt.offset + 8);
! bfd_put_16 (output_bfd, (bfd_vma) elf32_thumb_plt_entry[5],
! splt_thumb->contents + h->plt.offset + 10);
! bfd_put_16 (output_bfd, (bfd_vma) elf32_thumb_plt_entry[6],
! splt_thumb->contents + h->plt.offset + 12);
! bfd_put_16 (output_bfd, (bfd_vma) elf32_thumb_plt_entry[7],
! splt_thumb->contents + h->plt.offset + 14);
!
! bfd_put_32 (output_bfd,
! (sgot->output_section->vma
! + sgot->output_offset
! + plt_info->got_plt_offset
! - splt_thumb->output_section->vma
! - splt_thumb->output_offset
! - h->plt.offset - 10),
! splt_thumb->contents + h->plt.offset + 16);
!
! /* Fill in the entry in the global offset table and set
! bottom bit as plt[0] is a Thumb function. */
! bfd_put_32 (output_bfd,
! (splt_thumb->output_section->vma
! + (splt_thumb->output_offset | 1)),
! sgot->contents + plt_info->got_plt_offset);
! }
/* Fill in the entry in the .rel.plt section. */
rel.r_offset = (sgot->output_section->vma
+ sgot->output_offset
! + plt_info->got_plt_offset);
rel.r_info = ELF32_R_INFO (h->dynindx, R_ARM_JUMP_SLOT);
bfd_elf32_swap_reloc_out (output_bfd, &rel,
((Elf32_External_Rel *) srel->contents
! + rel_index));
if ((h->elf_link_hash_flags & ELF_LINK_HASH_DEF_REGULAR) == 0)
{
*************** elf32_arm_finish_dynamic_sections (outpu
*** 3478,3487 ****
if (elf_hash_table (info)->dynamic_sections_created)
{
asection *splt;
Elf32_External_Dyn *dyncon, *dynconend;
splt = bfd_get_section_by_name (dynobj, ".plt");
! BFD_ASSERT (splt != NULL && sdyn != NULL);
dyncon = (Elf32_External_Dyn *) sdyn->contents;
dynconend = (Elf32_External_Dyn *) (sdyn->contents + sdyn->_raw_size);
--- 3623,3634 ----
if (elf_hash_table (info)->dynamic_sections_created)
{
asection *splt;
+ asection *splt_thumb;
Elf32_External_Dyn *dyncon, *dynconend;
splt = bfd_get_section_by_name (dynobj, ".plt");
! splt_thumb = bfd_get_section_by_name (dynobj, ".plt.thumb");
! BFD_ASSERT (splt != NULL && splt_thumb != NULL && sdyn != NULL);
dyncon = (Elf32_External_Dyn *) sdyn->contents;
dynconend = (Elf32_External_Dyn *) (sdyn->contents + sdyn->_raw_size);
*************** elf32_arm_finish_dynamic_sections (outpu
*** 3544,3550 ****
}
}
! /* Fill in the first entry in the procedure linkage table. */
if (splt->_raw_size > 0)
{
bfd_put_32 (output_bfd, elf32_arm_plt0_entry[0], splt->contents + 0);
--- 3691,3697 ----
}
}
! /* Fill in the first entries in the procedure linkage tables. */
if (splt->_raw_size > 0)
{
bfd_put_32 (output_bfd, elf32_arm_plt0_entry[0], splt->contents + 0);
*************** elf32_arm_finish_dynamic_sections (outpu
*** 3552,3557 ****
--- 3699,3727 ----
bfd_put_32 (output_bfd, elf32_arm_plt0_entry[2], splt->contents + 8);
bfd_put_32 (output_bfd, elf32_arm_plt0_entry[3], splt->contents + 12);
}
+ if (splt_thumb->_raw_size > 0)
+ {
+ bfd_put_16 (output_bfd, (bfd_vma) elf32_thumb_plt0_entry[0],
+ splt_thumb->contents + 0);
+ bfd_put_16 (output_bfd, (bfd_vma) elf32_thumb_plt0_entry[1],
+ splt_thumb->contents + 2);
+ bfd_put_16 (output_bfd, (bfd_vma) elf32_thumb_plt0_entry[2],
+ splt_thumb->contents + 4);
+ bfd_put_16 (output_bfd, (bfd_vma) elf32_thumb_plt0_entry[3],
+ splt_thumb->contents + 6);
+ bfd_put_16 (output_bfd, (bfd_vma) elf32_thumb_plt0_entry[4],
+ splt_thumb->contents + 8);
+ bfd_put_16 (output_bfd, (bfd_vma) elf32_thumb_plt0_entry[5],
+ splt_thumb->contents + 10);
+ bfd_put_16 (output_bfd, (bfd_vma) elf32_thumb_plt0_entry[6],
+ splt_thumb->contents + 12);
+ bfd_put_16 (output_bfd, (bfd_vma) elf32_thumb_plt0_entry[7],
+ splt_thumb->contents + 14);
+ bfd_put_16 (output_bfd, (bfd_vma) elf32_thumb_plt0_entry[8],
+ splt_thumb->contents + 16);
+ bfd_put_16 (output_bfd, (bfd_vma) elf32_thumb_plt0_entry[9],
+ splt_thumb->contents + 18);
+ }
/* UnixWare sets the entsize of .plt to 4, although that doesn't
really seem like the right value. */
*************** elf32_arm_reloc_type_class (rela)
*** 3606,3611 ****
--- 3776,3811 ----
}
}
+ boolean
+ elf32_arm_create_dynamic_sections (abfd, info)
+ bfd *abfd;
+ struct bfd_link_info *info;
+ {
+ boolean ret;
+
+ ret = _bfd_elf_create_dynamic_sections (abfd, info);
+ if (ret)
+ {
+ asection *splt;
+ asection *splt_thumb;
+ flagword flags;
+ unsigned int alignent_power;
+
+ /* Let's match the attributes of .plt. */
+ splt = bfd_get_section_by_name (abfd, ".plt");
+ BFD_ASSERT (splt != NULL);
+
+ flags = bfd_get_section_flags (abfd, splt);
+ alignent_power = bfd_get_section_alignment (abfd, splt);
+
+ splt_thumb = bfd_make_section (abfd, ".plt.thumb");
+ if (splt_thumb == NULL
+ || !bfd_set_section_flags (abfd, splt_thumb, flags)
+ || !bfd_set_section_alignment (abfd, splt_thumb, alignent_power))
+ return false;
+ }
+ return ret;
+ }
#define ELF_ARCH bfd_arch_arm
#define ELF_MACHINE_CODE EM_ARM
*************** elf32_arm_reloc_type_class (rela)
*** 3625,3631 ****
#define elf_backend_check_relocs elf32_arm_check_relocs
#define elf_backend_relocate_section elf32_arm_relocate_section
#define elf_backend_adjust_dynamic_symbol elf32_arm_adjust_dynamic_symbol
! #define elf_backend_create_dynamic_sections _bfd_elf_create_dynamic_sections
#define elf_backend_finish_dynamic_symbol elf32_arm_finish_dynamic_symbol
#define elf_backend_finish_dynamic_sections elf32_arm_finish_dynamic_sections
#define elf_backend_size_dynamic_sections elf32_arm_size_dynamic_sections
--- 3825,3831 ----
#define elf_backend_check_relocs elf32_arm_check_relocs
#define elf_backend_relocate_section elf32_arm_relocate_section
#define elf_backend_adjust_dynamic_symbol elf32_arm_adjust_dynamic_symbol
! #define elf_backend_create_dynamic_sections elf32_arm_create_dynamic_sections
#define elf_backend_finish_dynamic_symbol elf32_arm_finish_dynamic_symbol
#define elf_backend_finish_dynamic_sections elf32_arm_finish_dynamic_sections
#define elf_backend_size_dynamic_sections elf32_arm_size_dynamic_sections
*************** elf32_arm_reloc_type_class (rela)
*** 3641,3646 ****
#endif
#define elf_backend_got_header_size 12
! #define elf_backend_plt_header_size PLT_ENTRY_SIZE
#include "elf32-target.h"
--- 3841,3846 ----
#endif
#define elf_backend_got_header_size 12
! #define elf_backend_plt_header_size ARM_PLT_ENTRY_SIZE
#include "elf32-target.h"
Index: ld/emulparams/armelf.sh
===================================================================
RCS file: /cvs/src/src/ld/emulparams/armelf.sh,v
retrieving revision 1.6
diff -c -p -r1.6 armelf.sh
*** ld/emulparams/armelf.sh 22 Nov 2001 09:08:04 -0000 1.6
--- ld/emulparams/armelf.sh 23 Jul 2002 07:42:03 -0000
*************** EXTRA_EM_FILE=armelf
*** 9,14 ****
--- 9,15 ----
OTHER_TEXT_SECTIONS='*(.glue_7t) *(.glue_7)'
OTHER_BSS_SYMBOLS='__bss_start__ = .;'
OTHER_BSS_END_SYMBOLS='_bss_end__ = . ; __bss_end__ = . ; __end__ = . ;'
+ OTHER_PLT_SECTIONS=".plt.thumb ${RELOCATING-0} : { *(.plt.thumb) }"
DATA_START_SYMBOLS='__data_start = . ;';
Index: ld/scripttempl/elf.sc
===================================================================
RCS file: /cvs/src/src/ld/scripttempl/elf.sc,v
retrieving revision 1.32
diff -c -p -r1.32 elf.sc
*** ld/scripttempl/elf.sc 7 Jun 2002 09:59:07 -0000 1.32
--- ld/scripttempl/elf.sc 23 Jul 2002 07:42:03 -0000
***************
*** 11,16 ****
--- 11,17 ----
# OTHER_READWRITE_SECTIONS - other than .data .bss .ctors .sdata ...
# (e.g., .PARISC.global)
# OTHER_BSS_SECTIONS - other than .bss .sbss ...
+ # OTHER_PLT_SECTIONS - other than .plt ...
# OTHER_SECTIONS - at the end
# EXECUTABLE_SYMBOLS - symbols that must be defined for an
# executable (e.g., _DYNAMIC_LINK)
*************** cat <<EOF
*** 257,262 ****
--- 258,264 ----
} =${NOP-0}
${DATA_PLT-${BSS_PLT-${PLT}}}
+ ${DATA_PLT-${BSS_PLT-${OTHER_PLT_SECTIONS}}}
.text ${RELOCATING-0} :
{
${RELOCATING+${TEXT_START_SYMBOLS}}
*************** cat <<EOF
*** 321,326 ****
--- 323,329 ----
${RELOCATING+${DTOR}}
.jcr ${RELOCATING-0} : { KEEP (*(.jcr)) }
${DATA_PLT+${PLT}}
+ ${DATA_PLT+${OTHER_PLT_SECTIONS}}
${RELOCATING+${OTHER_GOT_SYMBOLS}}
.got ${RELOCATING-0} : { *(.got.plt) *(.got) }
${OTHER_GOT_SECTIONS}
*************** cat <<EOF
*** 334,339 ****
--- 337,343 ----
${RELOCATING+${OTHER_BSS_SYMBOLS}}
${SBSS}
${BSS_PLT+${PLT}}
+ ${BSS_PLT+${OTHER_PLT_SECTIONS}}
.bss ${RELOCATING-0} :
{
*(.dynbss)