This is the mail archive of the
binutils@sources.redhat.com
mailing list for the binutils project.
[patch] gas/config/*.c: Fix formatting.
- From: Kazu Hirata <kazu at cs dot umass dot edu>
- To: binutils at sources dot redhat dot com
- Date: Thu, 09 May 2002 09:13:03 -0400 (EDT)
- Subject: [patch] gas/config/*.c: Fix formatting.
Hi,
Attached is a patch to fix formatting. Committed as obvious.
Kazu Hirata
2002-05-09 Kazu Hirata <kazu@cs.umass.edu>
* config/obj-coff.c: Fix formatting.
* config/obj-elf.c: Likewise.
* config/tc-alpha.c: Likewise.
* config/tc-arm.c: Likewise.
* config/tc-d10v.c: Likewise.
* config/tc-d30v.c: Likewise.
* config/tc-h8300.c: Likewise.
* config/tc-hppa.c: Likewise.
Index: obj-coff.c
===================================================================
RCS file: /cvs/src/src/gas/config/obj-coff.c,v
retrieving revision 1.56
diff -u -r1.56 obj-coff.c
--- obj-coff.c 31 Jan 2002 17:33:00 -0000 1.56
+++ obj-coff.c 9 May 2002 13:00:43 -0000
@@ -568,7 +568,7 @@
if (listing)
{
- lineno += coff_line_base - 1;
+ lineno += coff_line_base - 1;
listing_source_line (lineno);
}
}
@@ -716,7 +716,7 @@
name = S_GET_NAME (def_symbol_in_progress);
if (name[0] == '.' && name[2] == 'f' && name[3] == '\0')
- {
+ {
switch (name[1])
{
case 'b':
@@ -842,16 +842,16 @@
|| S_GET_SEGMENT (def_symbol_in_progress) == absolute_section
|| ! symbol_constant_p (def_symbol_in_progress)
|| (symbolP = symbol_find_base (S_GET_NAME (def_symbol_in_progress),
- DO_NOT_STRIP)) == NULL
+ DO_NOT_STRIP)) == NULL
|| SF_GET_TAG (def_symbol_in_progress) != SF_GET_TAG (symbolP))
{
/* If it already is at the end of the symbol list, do nothing */
if (def_symbol_in_progress != symbol_lastP)
- {
+ {
symbol_remove (def_symbol_in_progress, &symbol_rootP, &symbol_lastP);
symbol_append (def_symbol_in_progress, symbol_lastP, &symbol_rootP,
&symbol_lastP);
- }
+ }
}
else
{
@@ -1504,13 +1504,13 @@
sections so adjust_reloc_syms in write.c will correctly handle
relocs which refer to non-local symbols in these sections. */
if (strncmp (name, ".gnu.linkonce", sizeof (".gnu.linkonce") - 1) == 0)
- flags |= SEC_LINK_ONCE | SEC_LINK_DUPLICATES_DISCARD;
+ flags |= SEC_LINK_ONCE | SEC_LINK_DUPLICATES_DISCARD;
#endif
if (! bfd_set_section_flags (stdoutput, sec, flags))
- as_warn (_("error setting flags for \"%s\": %s"),
- bfd_section_name (stdoutput, sec),
- bfd_errmsg (bfd_get_error ()));
+ as_warn (_("error setting flags for \"%s\": %s"),
+ bfd_section_name (stdoutput, sec),
+ bfd_errmsg (bfd_get_error ()));
}
else if (flags != SEC_NO_FLAGS)
{
@@ -1564,7 +1564,7 @@
fragp = seg_info (sec)->frchainP->frch_root;
last = seg_info (sec)->frchainP->frch_last;
while (fragp->fr_next != last)
- fragp = fragp->fr_next;
+ fragp = fragp->fr_next;
last->fr_address = size;
fragp->fr_offset += new_size - size;
}
Index: obj-elf.c
===================================================================
RCS file: /cvs/src/src/gas/config/obj-elf.c,v
retrieving revision 1.48
diff -u -r1.48 obj-elf.c
--- obj-elf.c 4 Mar 2002 20:40:48 -0000 1.48
+++ obj-elf.c 9 May 2002 13:00:45 -0000
@@ -1,6 +1,6 @@
/* ELF object file format
- Copyright 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
- Free Software Foundation, Inc.
+ Copyright 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
+ 2001, 2002 Free Software Foundation, Inc.
This file is part of GAS, the GNU Assembler.
@@ -608,13 +608,13 @@
.section .init_array
*/
- { ".init_array",SHT_INIT_ARRAY, SHF_ALLOC + SHF_WRITE },
+ { ".init_array",SHT_INIT_ARRAY, SHF_ALLOC + SHF_WRITE },
{ ".fini_array",SHT_FINI_ARRAY, SHF_ALLOC + SHF_WRITE },
- { ".preinit_array",SHT_PREINIT_ARRAY, SHF_ALLOC + SHF_WRITE },
+ { ".preinit_array",SHT_PREINIT_ARRAY, SHF_ALLOC + SHF_WRITE },
#else
- { ".init_array",SHT_PROGBITS, SHF_ALLOC + SHF_WRITE },
+ { ".init_array",SHT_PROGBITS, SHF_ALLOC + SHF_WRITE },
{ ".fini_array",SHT_PROGBITS, SHF_ALLOC + SHF_WRITE },
- { ".preinit_array",SHT_PROGBITS, SHF_ALLOC + SHF_WRITE },
+ { ".preinit_array",SHT_PROGBITS, SHF_ALLOC + SHF_WRITE },
#endif
#ifdef ELF_TC_SPECIAL_SECTIONS
Index: tc-alpha.c
===================================================================
RCS file: /cvs/src/src/gas/config/tc-alpha.c,v
retrieving revision 1.38
diff -u -r1.38 tc-alpha.c
--- tc-alpha.c 27 Feb 2002 23:48:06 -0000 1.38
+++ tc-alpha.c 9 May 2002 13:00:55 -0000
@@ -1,6 +1,6 @@
/* tc-alpha.c - Processor-specific code for the DEC Alpha AXP CPU.
- Copyright 1989, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
- Free Software Foundation, Inc.
+ Copyright 1989, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
+ 2001, 2002 Free Software Foundation, Inc.
Contributed by Carnegie Mellon University, 1993.
Written by Alessandro Forin, based on earlier gas-1.38 target CPU files.
Modified by Ken Raeburn for gas-2.x and ECOFF support.
@@ -1894,7 +1894,7 @@
goto err;
++input_line_pointer;
- SKIP_WHITESPACE ();
+ SKIP_WHITESPACE ();
p = input_line_pointer;
c = get_symbol_end ();
@@ -1917,7 +1917,7 @@
}
*input_line_pointer = c;
- SKIP_WHITESPACE ();
+ SKIP_WHITESPACE ();
if (*input_line_pointer != '!')
{
if (r->require_seq)
@@ -2377,7 +2377,7 @@
abort ();
/* There is one special case for which an insn receives two
- relocations, and thus the user-supplied reloc does not
+ relocations, and thus the user-supplied reloc does not
override the operand reloc. */
if (operand->default_reloc == BFD_RELOC_ALPHA_HINT)
{
Index: tc-arm.c
===================================================================
RCS file: /cvs/src/src/gas/config/tc-arm.c,v
retrieving revision 1.118
diff -u -r1.118 tc-arm.c
--- tc-arm.c 2 May 2002 09:11:13 -0000 1.118
+++ tc-arm.c 9 May 2002 13:01:05 -0000
@@ -521,7 +521,7 @@
unsigned long regno;
};
-static const struct vfp_reg vfp_regs[] =
+static const struct vfp_reg vfp_regs[] =
{
{"fpsid", 0x00000000},
{"FPSID", 0x00000000},
@@ -842,7 +842,7 @@
static void do_mav_binops_3b PARAMS ((char *));
static void do_mav_binops_3c PARAMS ((char *));
static void do_mav_binops_3d PARAMS ((char *));
-static void do_mav_triple PARAMS ((char *, int, enum arm_reg_type,
+static void do_mav_triple PARAMS ((char *, int, enum arm_reg_type,
enum arm_reg_type,
enum arm_reg_type));
static void do_mav_triple_4a PARAMS ((char *));
@@ -855,7 +855,7 @@
static void do_mav_triple_5f PARAMS ((char *));
static void do_mav_triple_5g PARAMS ((char *));
static void do_mav_triple_5h PARAMS ((char *));
-static void do_mav_quad PARAMS ((char *, int, enum arm_reg_type,
+static void do_mav_quad PARAMS ((char *, int, enum arm_reg_type,
enum arm_reg_type,
enum arm_reg_type,
enum arm_reg_type));
@@ -1106,7 +1106,7 @@
{"strh", 0xe00000b0, 3, ARM_EXT_V4, do_ldstv4},
/* ARM Architecture 4T. */
- /* Note: bx (and blx) are required on V5, even if the processor does
+ /* Note: bx (and blx) are required on V5, even if the processor does
not support Thumb. */
{"bx", 0xe12fff10, 2, ARM_EXT_V4T | ARM_EXT_V5, do_bx},
@@ -2165,14 +2165,14 @@
break;
if (literals[lit_count].exp.X_op == inst.reloc.exp.X_op
- && inst.reloc.exp.X_op == O_symbol
- && (literals[lit_count].exp.X_add_number
+ && inst.reloc.exp.X_op == O_symbol
+ && (literals[lit_count].exp.X_add_number
== inst.reloc.exp.X_add_number)
- && (literals[lit_count].exp.X_add_symbol
+ && (literals[lit_count].exp.X_add_symbol
== inst.reloc.exp.X_add_symbol)
- && (literals[lit_count].exp.X_op_symbol
+ && (literals[lit_count].exp.X_op_symbol
== inst.reloc.exp.X_op_symbol))
- break;
+ break;
lit_count++;
}
@@ -2624,9 +2624,9 @@
thumb_mode = 0;
if (!need_pass_2)
- frag_align (2, 0, 0);
+ frag_align (2, 0, 0);
- record_alignment (now_seg, 1);
+ record_alignment (now_seg, 1);
}
break;
@@ -3450,13 +3450,13 @@
}
else /* [Rn] */
{
- skip_whitespace (str);
+ skip_whitespace (str);
- if (* str == '!')
- {
- str ++;
- inst.instruction |= WRITE_BACK;
- }
+ if (* str == '!')
+ {
+ str ++;
+ inst.instruction |= WRITE_BACK;
+ }
inst.instruction |= INDEX_UP | HWOFFSET_IMM;
pre_inc = 1;
@@ -4027,10 +4027,10 @@
{
/* This must be is BLX <target address>, no condition allowed. */
if (inst.instruction != COND_ALWAYS)
- {
- inst.error = BAD_COND;
+ {
+ inst.error = BAD_COND;
return;
- }
+ }
inst.instruction = 0xfafffffe;
@@ -4088,7 +4088,7 @@
BKPT <16 bit unsigned immediate>
Instruction is not conditional.
The bit pattern given in insns[] has the COND_ALWAYS condition,
- and it is an error if the caller tried to override that. */
+ and it is an error if the caller tried to override that. */
static void
do_bkpt (str)
@@ -4331,7 +4331,7 @@
|| (rn = ld_mode_required_here (& str)) == FAIL)
{
if (!inst.error)
- inst.error = BAD_ARGS;
+ inst.error = BAD_ARGS;
return;
}
@@ -4514,7 +4514,7 @@
return 0;
}
-/* We handle all bad expressions here, so that we can report the faulty
+/* We handle all bad expressions here, so that we can report the faulty
instruction in the error message. */
void
md_operand (expr)
@@ -5543,7 +5543,7 @@
end_of_line (str);
return;
}
-
+
value = validate_immediate (~ inst.reloc.exp.X_add_number);
if (value != FAIL)
@@ -6729,7 +6729,7 @@
/* Mark it. */
*--p = 0;
- for (vreg = vfp_regs + 0;
+ for (vreg = vfp_regs + 0;
vreg < vfp_regs + sizeof (vfp_regs) / sizeof (struct vfp_reg);
vreg++)
{
@@ -7929,11 +7929,11 @@
/* Restore the start point. */
*str = start;
-
+
/* In the few cases where we might be able to accept something else
this error can be overridden. */
inst.error = _(all_reg_maps[regtype].expected);
-
+
return FAIL;
}
@@ -8181,7 +8181,7 @@
REG_TYPE_MVFX);
}
-/* cfmvsc32<cond> DSPSC,MVFX[15:0]. */
+/* cfmvsc32<cond> DSPSC,MVFX[15:0]. */
static void
do_mav_dspsc_1 (str)
char * str;
@@ -9095,7 +9095,7 @@
*p = c;
return 0;
}
-
+
static void
set_constant_flonums ()
{
@@ -10487,7 +10487,7 @@
/* md_parse_option
Invocation line includes a switch not recognized by the base assembler.
- See if it's a processor-specific option.
+ See if it's a processor-specific option.
This routine is somewhat complicated by the need for backwards
compatibility (since older releases of gcc can't be changed).
@@ -10505,7 +10505,7 @@
-mthumb Start in Thumb mode
-mthumb-interwork Code supports ARM/Thumb interworking
- For now we will also provide support for
+ For now we will also provide support for
-mapcs-32 32-bit Program counter
-mapcs-26 26-bit Program counter
@@ -10581,7 +10581,7 @@
char *deprecated; /* If non-null, print this message. */
};
-struct arm_option_table arm_opts[] =
+struct arm_option_table arm_opts[] =
{
{"k", N_("generate PIC code"), &pic_code, 1, NULL},
{"mthumb", N_("assemble Thumb code"), &thumb_mode, 1, NULL},
@@ -10789,7 +10789,7 @@
{"ep9312", ARM_ARCH_V4T | ARM_CEXT_MAVERICK, FPU_NONE},
{NULL, 0, 0}
};
-
+
struct arm_arch_option_table
{
char *name;
@@ -11046,7 +11046,7 @@
#endif
case 'a':
- /* Listing option. Just ignore these, we don't support additional
+ /* Listing option. Just ignore these, we don't support additional
ones. */
return 0;
@@ -11073,10 +11073,10 @@
for (lopt = arm_long_opts; lopt->option != NULL; lopt++)
{
- /* These options are expected to have an argument. */
+ /* These options are expected to have an argument. */
if (c == lopt->option[0]
&& arg != NULL
- && strncmp (arg, lopt->option + 1,
+ && strncmp (arg, lopt->option + 1,
strlen (lopt->option + 1)) == 0)
{
#if WARN_DEPRECATED
@@ -11248,7 +11248,7 @@
lsl r3, r3, #2
ldr r2, [r3, r2]
mov pc, r2
-
+
.Lbbb: .word .Lxxx
.Lccc: .word .Lyyy
..etc...
@@ -11258,7 +11258,7 @@
The second instruction converts a table index into a byte offset.
The third instruction gets the jump address out of the table.
The fourth instruction performs the jump.
-
+
If the address stored at .Laaa is that of a symbol which has the
Thumb_Func bit set, then the linker will arrange for this address
to have the bottom bit set, which in turn would mean that the
@@ -11307,7 +11307,7 @@
as_bad (_("%s: unexpected function type: %d"),
S_GET_NAME (sym), S_GET_STORAGE_CLASS (sym));
}
- else switch (S_GET_STORAGE_CLASS (sym))
+ else switch (S_GET_STORAGE_CLASS (sym))
{
case C_EXT:
S_SET_STORAGE_CLASS (sym, C_THUMBEXT);
@@ -11609,17 +11609,17 @@
int bytes, fix, noop_size;
char * p;
const char * noop;
-
+
if (fragP->fr_type != rs_align_code)
return;
bytes = fragP->fr_next->fr_address - fragP->fr_address - fragP->fr_fix;
p = fragP->fr_literal + fragP->fr_fix;
fix = 0;
-
+
if (bytes > MAX_MEM_FOR_RS_ALIGN_CODE)
bytes &= MAX_MEM_FOR_RS_ALIGN_CODE;
-
+
if (fragP->tc_frag_data)
{
if (target_big_endian)
@@ -11636,7 +11636,7 @@
noop = arm_noop;
noop_size = sizeof (arm_noop);
}
-
+
if (bytes & (noop_size - 1))
{
fix = bytes & (noop_size - 1);
@@ -11652,7 +11652,7 @@
bytes -= noop_size;
fix += noop_size;
}
-
+
fragP->fr_fix += fix;
fragP->fr_var = noop_size;
}
@@ -11671,7 +11671,7 @@
to support alignments greater than 32 bytes. */
if (max > MAX_MEM_FOR_RS_ALIGN_CODE)
as_fatal (_("alignments greater than 32 bytes not supported in .text sections."));
-
+
p = frag_var (rs_align_code,
MAX_MEM_FOR_RS_ALIGN_CODE,
1,
Index: tc-d10v.c
===================================================================
RCS file: /cvs/src/src/gas/config/tc-d10v.c,v
retrieving revision 1.26
diff -u -r1.26 tc-d10v.c
--- tc-d10v.c 16 Apr 2002 02:58:11 -0000 1.26
+++ tc-d10v.c 9 May 2002 13:01:10 -0000
@@ -99,9 +99,9 @@
struct d10v_opcode *opcode2, unsigned long insn2,
packing_type exec_type));
-static void check_resource_conflict PARAMS ((struct d10v_opcode *opcode1,
- unsigned long insn1,
- struct d10v_opcode *opcode2,
+static void check_resource_conflict PARAMS ((struct d10v_opcode *opcode1,
+ unsigned long insn1,
+ struct d10v_opcode *opcode2,
unsigned long insn2));
static symbolS * find_symbol_matching_register PARAMS ((expressionS *));
@@ -670,8 +670,8 @@
insn = insn | (number << shift);
}
- /* kludge: for DIVS, we need to put the operands in twice on the second
- pass, format is changed to LONG_R to force the second set of operands
+ /* kludge: for DIVS, we need to put the operands in twice on the second
+ pass, format is changed to LONG_R to force the second set of operands
to not be shifted over 15. */
if ((opcode->opcode == OPCODE_DIVS) && (format == LONG_L))
insn = build_insn (opcode, opers, insn);
@@ -728,8 +728,8 @@
if (opcode->exec_type & PARONLY)
as_fatal (_("Instruction must be executed in parallel with another instruction."));
- /* The other container needs to be NOP.
- According to 4.3.1: for FM=00, sub-instructions performed only by IU
+ /* The other container needs to be NOP.
+ According to 4.3.1: for FM=00, sub-instructions performed only by IU
cannot be encoded in L-container. */
if (opcode->unit == IU)
insn |= FM00 | (NOP << 15); /* Right container. */
@@ -944,7 +944,7 @@
/* If this is auto parallization, and either instruction is a branch,
don't parallel. */
if (exec_type == PACK_UNSPEC
- && (op1->exec_type & (ALONE | BRANCH)
+ && (op1->exec_type & (ALONE | BRANCH)
|| op2->exec_type & (ALONE | BRANCH)))
return 0;
@@ -963,8 +963,8 @@
and the second reads the PSW (which includes C, F0, and F1), then
they cannot operate safely in parallel. */
- /* The bitmasks (mod and used) look like this (bit 31 = MSB).
- r0-r15 0-15
+ /* The bitmasks (mod and used) look like this (bit 31 = MSB).
+ r0-r15 0-15
a0-a1 16-17
cr (not psw) 18
psw 19
@@ -1051,7 +1051,7 @@
/* Determine if there are any resource conflicts among two manually
parallelized instructions. Some of this was lifted from parallel_ok. */
-static void
+static void
check_resource_conflict (op1, insn1, op2, insn2)
struct d10v_opcode *op1, *op2;
unsigned long insn1, insn2;
@@ -1127,35 +1127,35 @@
if (flags & (OPERAND_ACC0 | OPERAND_ACC1))
regno += 16;
else if (flags & OPERAND_CONTROL) /* mvtc or mvfc */
- {
+ {
if (regno == 0)
regno = 19;
else
- regno = 18;
+ regno = 18;
}
else if (flags & OPERAND_FFLAG)
regno = 22;
else if (flags & OPERAND_CFLAG)
regno = 21;
-
- if ( flags & OPERAND_DEST )
+
+ if ( flags & OPERAND_DEST )
{
mod[j] |= 1 << regno;
if (flags & OPERAND_EVEN)
mod[j] |= 1 << (regno + 1);
}
- else
- {
- used[j] |= 1 << regno ;
- if (flags & OPERAND_EVEN)
- used[j] |= 1 << (regno + 1);
-
- /* Auto inc/dec also modifies the register. */
- if (op->operands[i+1] != 0
- && (d10v_operands[op->operands[i+1]].flags
- & (OPERAND_PLUS | OPERAND_MINUS)) != 0)
- mod[j] |= 1 << regno;
- }
+ else
+ {
+ used[j] |= 1 << regno ;
+ if (flags & OPERAND_EVEN)
+ used[j] |= 1 << (regno + 1);
+
+ /* Auto inc/dec also modifies the register. */
+ if (op->operands[i+1] != 0
+ && (d10v_operands[op->operands[i+1]].flags
+ & (OPERAND_PLUS | OPERAND_MINUS)) != 0)
+ mod[j] |= 1 << regno;
+ }
}
else if (flags & OPERAND_ATMINUS)
{
@@ -1294,7 +1294,7 @@
d10v_cleanup ();
if (prev_opcode
- && (0 == write_2_short (prev_opcode, prev_insn, opcode, insn, extype,
+ && (0 == write_2_short (prev_opcode, prev_insn, opcode, insn, extype,
fixups)))
{
/* No instructions saved. */
@@ -1520,7 +1520,7 @@
}
match = 0;
-
+
/* Now search the opcode table table for one with operands
that matches what we've got. */
while (!match)
@@ -1562,19 +1562,19 @@
break;
}
- /* Unfortunatly, for the indirect operand in instructions such
- as ``ldb r1, @(c,r14)'' this function can be passed
- X_op == O_register (because 'c' is a valid register name).
- However we cannot just ignore the case when X_op == O_register
- but flags & OPERAND_REG is null, so we check to see if a symbol
- of the same name as the register exists. If the symbol does
- exist, then the parser was unable to distinguish the two cases
+ /* Unfortunatly, for the indirect operand in instructions such
+ as ``ldb r1, @(c,r14)'' this function can be passed
+ X_op == O_register (because 'c' is a valid register name).
+ However we cannot just ignore the case when X_op == O_register
+ but flags & OPERAND_REG is null, so we check to see if a symbol
+ of the same name as the register exists. If the symbol does
+ exist, then the parser was unable to distinguish the two cases
and we fix things here. (Ref: PR14826) */
if (!(flags & OPERAND_REG) && (X_op == O_register))
{
symbolS * sym;
-
+
sym = find_symbol_matching_register (& myops[i]);
if (sym != NULL)
@@ -1672,9 +1672,9 @@
if (fixp->fx_r_type == BFD_RELOC_VTABLE_INHERIT
|| fixp->fx_r_type == BFD_RELOC_VTABLE_ENTRY)
reloc->address = fixp->fx_offset;
-
+
reloc->addend = fixp->fx_addnumber;
-
+
return reloc;
}
@@ -1769,13 +1769,13 @@
XXX - Do we have to worry about branches to a symbol + offset ? */
if (fixP->fx_addsy != NULL
&& S_IS_EXTERN (fixP->fx_addsy) )
- {
- segT fseg = S_GET_SEGMENT (fixP->fx_addsy);
- segment_info_type *segf = seg_info(fseg);
+ {
+ segT fseg = S_GET_SEGMENT (fixP->fx_addsy);
+ segment_info_type *segf = seg_info(fseg);
if ( segf && segf->sym != fixP->fx_addsy)
value = 0;
- }
+ }
/* Drop through. */
case BFD_RELOC_D10V_18:
/* Instruction addresses are always right-shifted by 2. */
@@ -1789,9 +1789,9 @@
rep = (struct d10v_opcode *) hash_find (d10v_hash, "rep");
repi = (struct d10v_opcode *) hash_find (d10v_hash, "repi");
if ((insn & FM11) == FM11
- && ((repi != NULL
+ && ((repi != NULL
&& (insn & repi->mask) == (unsigned) repi->opcode)
- || (rep != NULL
+ || (rep != NULL
&& (insn & rep->mask) == (unsigned) rep->opcode))
&& value < 4)
as_fatal
Index: tc-d30v.c
===================================================================
RCS file: /cvs/src/src/gas/config/tc-d30v.c,v
retrieving revision 1.17
diff -u -r1.17 tc-d30v.c
--- tc-d30v.c 15 Nov 2001 21:28:55 -0000 1.17
+++ tc-d30v.c 9 May 2002 13:01:11 -0000
@@ -1,5 +1,5 @@
/* tc-d30v.c -- Assembler code for the Mitsubishi D30V
- Copyright 1997, 1998, 1999, 2000, 2001 Free Software Foundation, Inc.
+ Copyright 1997, 1998, 1999, 2000, 2001, 2002 Free Software Foundation, Inc.
This file is part of GAS, the GNU Assembler.
@@ -246,7 +246,7 @@
if (bits == 32)
{
if (sizeof (unsigned long) * CHAR_BIT == 32)
- return 0;
+ return 0;
/* We don't record signed or unsigned for 32-bit quantities.
Allow either. */
@@ -1211,7 +1211,7 @@
return 0;
}
else
- if ((mod_reg[0][j] & (mod_reg[1][j] | used_reg[1][j])) != 0)
+ if ((mod_reg[0][j] & (mod_reg[1][j] | used_reg[1][j])) != 0)
return 0;
}
Index: tc-h8300.c
===================================================================
RCS file: /cvs/src/src/gas/config/tc-h8300.c,v
retrieving revision 1.19
diff -u -r1.19 tc-h8300.c
--- tc-h8300.c 24 Jan 2002 18:22:06 -0000 1.19
+++ tc-h8300.c 9 May 2002 13:01:13 -0000
@@ -1,6 +1,6 @@
/* tc-h8300.c -- Assemble code for the Hitachi H8/300
- Copyright 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 2000, 2001
- Free Software Foundation, Inc.
+ Copyright 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 2000,
+ 2001, 2002 Free Software Foundation, Inc.
This file is part of GAS, the GNU Assembler.
@@ -1491,7 +1491,7 @@
valueT size;
{
return ((size + (1 << section_alignment[(int) seg]) - 1)
- & (-1 << section_alignment[(int) seg]));
+ & (-1 << section_alignment[(int) seg]));
}
#endif
Index: tc-hppa.c
===================================================================
RCS file: /cvs/src/src/gas/config/tc-hppa.c,v
retrieving revision 1.95
diff -u -r1.95 tc-hppa.c
--- tc-hppa.c 5 Mar 2002 17:57:17 -0000 1.95
+++ tc-hppa.c 9 May 2002 13:01:20 -0000
@@ -1289,10 +1289,10 @@
{
if (1
#ifdef OBJ_SOM
- && current_space == label_chain->lss_space && label_chain->lss_label
+ && current_space == label_chain->lss_space && label_chain->lss_label
#endif
#ifdef OBJ_ELF
- && now_seg == label_chain->lss_segment && label_chain->lss_label
+ && now_seg == label_chain->lss_segment && label_chain->lss_label
#endif
)
{
@@ -2334,16 +2334,16 @@
args++;
switch (*args)
{
- /* Handle FP compare conditions. */
- case 'f':
- cond = pa_parse_fp_cmp_cond (&s);
- INSERT_FIELD_AND_CONTINUE (opcode, cond, 0);
+ /* Handle FP compare conditions. */
+ case 'f':
+ cond = pa_parse_fp_cmp_cond (&s);
+ INSERT_FIELD_AND_CONTINUE (opcode, cond, 0);
/* Handle an add condition. */
case 'A':
case 'a':
- cmpltr = 0;
- flag = 0;
+ cmpltr = 0;
+ flag = 0;
if (*s == ',')
{
s++;
@@ -4240,8 +4240,8 @@
case R_N0SEL:
case R_N1SEL:
/* There is no symbol or addend associated with these fixups. */
- relocs[i]->sym_ptr_ptr = (asymbol **) xmalloc (sizeof (asymbol *));
- *relocs[i]->sym_ptr_ptr = symbol_get_bfdsym (dummy_symbol);
+ relocs[i]->sym_ptr_ptr = (asymbol **) xmalloc (sizeof (asymbol *));
+ *relocs[i]->sym_ptr_ptr = symbol_get_bfdsym (dummy_symbol);
relocs[i]->addend = 0;
break;
@@ -4249,8 +4249,8 @@
case R_ENTRY:
case R_EXIT:
/* There is no symbol associated with these fixups. */
- relocs[i]->sym_ptr_ptr = (asymbol **) xmalloc (sizeof (asymbol *));
- *relocs[i]->sym_ptr_ptr = symbol_get_bfdsym (dummy_symbol);
+ relocs[i]->sym_ptr_ptr = (asymbol **) xmalloc (sizeof (asymbol *));
+ *relocs[i]->sym_ptr_ptr = symbol_get_bfdsym (dummy_symbol);
relocs[i]->addend = fixp->fx_offset;
break;
@@ -5227,7 +5227,7 @@
input_line_pointer = *strp;
s = *strp;
while (*s != ',' && *s != ' ' && *s != '\t')
- s++;
+ s++;
c = *s;
*s = 0;